Flexible I/O marshalling system

VIP/S/FRONT-MC/KIT 1-8 - Pair of screw-clamp plugs to connect to VIP base module labeled 1-8

VIP/S/MC/KIT 25-32 - Pair of screw-clamp plugs to connect to VIP base module labeled 25-32.

Printed-circuit board connector - VIP/S/FRONT-MC/KIT 9-16

VIP/S/FRONT-MC/KIT 17-24 - Pair of screw-clamp plugs to connect to VIP base module labeled 17-24

Partition plate - VIP/U/RAIL 3L DIVIDER

Input/output module - IOA REL 24V DO/BFI/3.0A/EX

VIP/P/FKC/KIT CX - Plug kit for use with VIP/MSTB/D50M/BASE..., push-in connections

IOA PR-DAI/DAO/F/DS/2A/EX - Fuse module for VIP I/O marshalling base elements with replaceable 2 A fuse in the field device supply path. Integrated test points and a disconnect knife allow uninterrupted signal measurement.

IOA LM-DI/R/RUSIO/EX - Cable monitoring module for VIP I/O marshalling base elements. Enables cable fault monitoring when using standard switching contacts in safety applications. Both wire breaks and short circuits can be detected.

FUSE/TE5/1A/T-10PCS - Fuse set, number: 10 Pcs., nominal current: 1 A, tripping characteristic: slow-blow (T)

Fuse set, number: 10 Pcs., nominal current: 3.15 A, tripping characteristic: slow-blow (T)

IOA DAC-4DI/AI/EX - Digital-to-analog converter for VIP I/O-Marshalling base elements. For connection of four digital inputs and conversion to a single analog 4...20 mA signal. Saves three I/O channels.

IOA FEED-THRU-DO/NI/EX - Non-incendive, Ex ic impeding devices for VIP I/O marshalling base elements. For limiting current (60 mA or 80 mA) and voltage (26.4 V DC) on digital outputs. For example, to control solenoid valves in the Ex area (zone 2, CID2).

IOA PR-DAI/DAO/F/DS/0.25A/EX - Fuse module for VIP I/O marshalling base elements with replaceable 0.25 A fuse in the field device supply path. Integrated test points and a disconnect knife allow uninterrupted signal measurement.

16-channel VIP I/O marshalling base element for universal use. Plug-in field and supply terminals available as accessories. Either with screw or Push-in connection technology. Compatible with the Tricon CX DCS series (D-SUB 50).

VIP/S/D25M/BASE 1-8/L/C/EX - 8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. This module with the D-SUB 25 connector is pin compatible with the Foxboro I/A series DCS.

IOA FEED-THRU/EX - Feed-through terminal block for VIP I/O-Marshalling base elements for conveying field signals to or from the I/O system.

VIP/S/MC/BASE 1-8/L/C/EX - 8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. With the COMBICON connector, compatible with the Honeywell C300 and RUSIO series. Marking for channels 1–8 and painting.

IOA-PSR-PS22-1NO-1NC-24DC - Plug-in SIL coupling relay as an input/output accessory for VIP base module, SIL 3 high- and low-demand applications, safe-state-off, couples digital output signals to the periphery, one enabling current path, one confirmation current path, test pulse filter

VIP/S/MC/KIT 1-8 - Pair of screw-clamp plugs to connect to VIP base module labeled 1-8.