Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

DCN1-2R

DeviceNet T-branch tap for 1 branch line, 3 straight connectors with screws, side cable entry

DST1-ID12SL-1

Remote I/O terminal, 12 x PNP inputs, 4 x test outputs

DST1-MRD08SL-1

Remote I/O terminal, 4 x PNP inputs, 4 x relay outputs, 4 x test outputs

DST1-XD0808SL-1

WS02-CFSC1-EV3-UP

XW4B-05C1-VIR-D

DeviceNet Orthogonal Connector with Screws

Y9S-04T1B-02A

WS02-G9SP10-V2

G9SP Configurator, 10 license, WIN-2000/XP/Vista.

WS02-G9SP50-V2

G9SP Configurator, 50 license, WIN-2000/XP/Vista.

WS02-G9SPXX-V2

G9SP Configurator, flex license, WIN-2000/XP/Vista.

Y9S-10C1B-04B

4 Number of Blocks Spring-Cage Terminal Block

NE1A-SCPU02-EIP VER1.1

Safety network controller, 40 x PNP inputs, 8x PNP outputs, 8x test outputs, IP

IS-SAFETYKIT-1220

Y9S-10T1B-04B

NE1A-SCPU02

Safety network controller, 40 x PNP inputs, 8x PNP outputs, 8x test outputs

Tina 2B is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2B is placed inside the safety device enclosure.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 2B

Tina 3Aps is used for adaptation of devices with two positively driven force-guided contacts like E-stop buttons and key switches, to the DYNlink solution, with extra conductor for the supply of the safety device. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop. Connection to +24VDC and 0V on the device side.

Tina 3Aps

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.

Safety PLC with AS-i bus and Pluto safety bus. Totally 42 I/O: 20 failsafe inputs + 16 non-failsafe outputs/failsafe inputs + 4 individually failsafe relay outputs + 2 individually failsafe transistor outputs.

Pluto B42 AS-i

Pluto B42 AS-i Programmable safety controller

Identifier, read/write, for assigning an address to the Pluto it is connected to and for storage of the AS-i safety codes. Must be used with Pluto AS-i and Pluto B42 AS-i and can be used for all Pluto types. The identification number is programmable, i.e. the user can choose the number.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

IDFIX-DATA

External program memory, 2.5 kbyte. For projects with only one Pluto the memory can store the PLC program. Can also be used to give Pluto AS-i a specific address.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

IDFIX-PROG 2k5

DRTCBL

Upgrading to a safety controller can be complicated due to the additional program development, troubleshooting and PLC integration.  The compact G9SP safety controller makes adding a safety controller simple. Ideal for small to mid-size applications, the G9SP safety controller has a user friendly programming environment, including embedded simulation and monitoring tools, that makes program development and troubleshooting easy and accessible.  With selectable communication modules supporting common protocols such as EtherNet/IP, the G9SP offers simple and flexible integration with the common standard PLCs in the market.  The G9SP makes it easy to add the flexibility and power of a safety controller to your safety solution.<ul>
<li>Three CPU-types to suit different applications</li>
<li>Clear diagnosis and monitoring via Ethernet (Omron FINS protocol), EtherNet/IP, or Serial (RS-232) connection</li>
<li>Supports direct connection with non-contact switches and safety mats</li>
<li>Memory cassette for easy duplication of configuration</li>
<li>Unique programming software to support easy design, verification, standardization and reusage of the program</li>
<li>Certified according to PLe (EN ISO 13849-1) and SIL 3 (IEC 61508)</li>
<li>READ NOW: Important Revision to G9SP Series Safety Controller Operation Manual</li>
</ul>


G9SP Safety Controller

Large machine safety solutions involve complicated commissioning as well as challenging maintenance activities. The NE1A Compact Safety Controller with DeviceNet Safety capabilities allows supporting safety components to be distributed over large systems reducing wiring and improving productivity. The NE1A can manage up to 32 DeviceNet safety connections and can integrate into any standard DeviceNet system.<ul>
<li>Removable cage-clamp terminals for easy installation</li>
<li>Predefined and certified function blocks for easy programming</li>
<li>LED display and status LEDs for advanced diagnostics</li>
<li>System status on DeviceNet for easy troubleshooting and predictive maintenance</li>
<li>Easy scalability through the addition of DeviceNet safety devices</li>
</ul>


NE1A Safety Network Controller

<p>Meeting machine safety requirements and improving commissioning is a challenging task for maintenance teams and system integrators.  The NX-SL3 offers a cost-effective safety controller with a modular design making it easy to adapt to a variety of machine types and sizes. For retrofit projects, it offers a direct connection to any PLC using an EtherNet/IP coupler. For systems requiring remote I/O, the NX-SL3 can be combined with an EtherCAT coupler to enable Functional Safety over EtherCAT(FSoE), making the project seamless to operate and maintain.  The IDE of Sysmac Studio simplifies the safety configuration, programming, and maintenance, thanks to its unique features such as automatic programming, simple automatic test, and safety function verification.</p><p>Complex safety challenges are simplified with NX safety control. Learn more about achieving the highest level of productivity and flexibility without compromising safety.</p><ul><li>The safety controller meets Category 4, PLe according to the EN ISO 13849-1 and SIL3 according to the IEC 61508</li><li>Up to 8 safety input points per unit</li><li>Safety Function Blocks conforming with IEC 61131-3 standard programming</li><li>PLCopen Function Blocks for safety Integration in one software, Sysmac Studio</li></ul><p>This safety controller uses the same hardware used on EtherCAT networks and EtherNet/IP connectivity for monitoring of status and informationSysmac Studio Software Full License supports EtherCAT integration and EtherNET/IP Stand-alone configuration of the NX-S modular safety I/O. Sysmac Studio Safety License supports only EtherNET/IP Stand-alone configuration of the NX-S modular safety I/O</p><h4>Safety Units</h4>

Programmable Safety Controllers