Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

A Safety Input Unit with 8 digital safety inputs with PNP (sourcing) type, operating at 24 VDC. The unit includes 2 test outputs and uses screwless push-in connectors for easy installation.

NX-SID800

8 Digital Safety Inputs, PNP 24 VDC, screwless push-in connector, 12 mm wide

A Safety Output Unit with 4 digital safety outputs with a PNP (sourcing) type, operating at 24 VDC with a maximum output current of 0.5 A per point and 2.0 A per unit.

NX-SOD400

4 Digital Safety Outputs, PNP 24 VDC, 0.5 A/point, 2.0 A/NX Unit, screwless push-in connector, 12 mm wide

NX-SL3300 VER1.1

Safety controller, 32 safety master connections, up to 256 safety I/O

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.

Safety PLC with Pluto safety bus. Totally 46 I/O: 24 failsafe inputs + 16 non-failsafe outputs/failsafe inputs + 4 individually failsafe relay outputs + 2 individually failsafe transistor outputs.

Pluto B46 v2

Pluto B46 v2 Programmable safety controller

Vital 1 Safety controller with relay outputs 2NO, +24 VDC supply voltage and detachable screw terminals.
For monitoring of safety devices, such as emergency stops, using DYNlink.

Vital 1 is a configurable safety controller that does not require programming. 
It uses the DYNlink system, which allows up to 30 safety devices to be connected in series to the same circuit, while achieving PL e / SIL 3. 
The DYNlink circuit is a unique solution that uses one single channel to achieve upt to Cat.4/PL e. Using DYNlink reduces the installation and engineering time thanks to simple installation with serial connection using M12 connectors. 
Vital 1 can only be used with DYNlink safety devices, such as Eden DYN and devices with a Tina adapter.

Vital 1

G9SP-N20S

Programmable Safety controller,G9SP standalone , 20 safety input, 8 safety output, 6 test output. PNP

G9SP-N10S

G9SP Standalone Safety controller, 10 safety input, 4 safety output, 4 test output, 4 standard output. PNP

Omron 82611-0010 (CM-EIP-1) Ethernet/IP Option Board for G9SP Safety ControllersThe Omron 82611-0010 (CM-EIP-1) is an EtherNet/IP communication option board designed for seamless integration of G9SP Safety Controllers into industrial control and automation networks. This plug-in communication module enables efficient data exchange between the G9SP safety system and PLCs, HMIs, and supervisory control systems, simplifying safety monitoring, diagnostics, and system integration. By adding EtherNet/IP connectivity, the CM-EIP-1 helps reduce wiring complexity, improve network visibility, and support centralized machine safety management.<ul><li>EtherNet/IP communication option board for Omron G9SP Safety Controllers</li><li>Enables network-based monitoring and diagnostics of safety systems</li><li>Simplifies integration with PLCs, HMIs, and plant-wide control networks</li><li>Reduces hardwired I/O requirements and installation costs</li><li>Supports flexible and scalable machine safety architectures</li><li>Ideal for packaging, material handling, robotics, automotive, and manufacturing applications</li><li>Designed for use with Omron G9SP configurable safety controller platforms</li></ul>

82611-0010

CM-EIP-1  Ethernet IP Communication Module for G9SP

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.

Safety PLC with Pluto safety bus. Totally 20 I/O: 8 failsafe inputs + 8 non-failsafe outputs/failsafe inputs + 2 individually failsafe relay outputs + 2 individually failsafe transistor outputs.

Pluto B20 v2

Pluto B20 v2 Programmable safety controller

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.

Safety PLC. Totally 20 I/O: 8 failsafe inputs + 8 non-failsafe outputs/failsafe inputs + 2 individually failsafe relay outputs + 2 individually failsafe transistor outputs. (Without Pluto safety bus). NOTE: Version 2 hardware/processor.

Pluto S20 v2

Pluto S20 v2 Programmable safety controller

Pluto cable, USB port to Pluto programming port.

Pluto cable USB

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.

Safety PLC. Totally 46 I/O: 24 failsafe inputs + 16 non-failsafe outputs/failsafe inputs + 4 individually failsafe relay outputs + 2 individually failsafe transistor outputs. (Without Pluto safety bus)

Pluto S46 v2

Pluto S46 v2 Programmable safety controller

Tina 3A is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 3A

NX-SL5500

Safety controller, CIP-S and EtherCAT, 128 safety master connections, up to 1024 safety I/O, 2 MB memory capacity, SD Backup/Restore supported

Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol EtherNet I/P.

With the use of a Gateway device, Pluto can communicate with other control systems and thereby form a part of a larger network. The unit has a common interface with Pluto, i.e. the same cabling and the Pluto Manager software can be used for servicing and where necessary programming.

GATE-EIP

External program memory, 10 kbyte. For projects with only one Pluto the memory can store the PLC program. Can also be used to give Pluto AS-i a specific address.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

IDFIX-PROG 10k

Tina 1A blind plug is connected to the unused M12 connectors of the connection blocks Tina 4A or Tina 8A. M12-5 male connector.

The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 1A

Tina 4A is a connection block for series connection of up to four DYNlink devices. Four M12-5 female connectors for the sensors are available on the device. The information signal of each device can be wired separately. The cable used for the connection to the Tina 4A should have a diameter 7 - 12 mm. Unused M12-connectors on Tina 4A must be equipped with Tina 1A blind plugs.

The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 4A

Identifier, read only, for assigning an address to the Pluto it is connected to. Each Pluto connected to the Pluto safety bus needs an IDFIX. The IDFIX number is fixed at delivery.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

IDFIX-R

G9SP-N10D

G9SP Standalone Safety controller, 10 safety input, 16 safety output, 6 test output. PNP

DRTCBL

Upgrading to a safety controller can be complicated due to the additional program development, troubleshooting and PLC integration.  The compact G9SP safety controller makes adding a safety controller simple. Ideal for small to mid-size applications, the G9SP safety controller has a user friendly programming environment, including embedded simulation and monitoring tools, that makes program development and troubleshooting easy and accessible.  With selectable communication modules supporting common protocols such as EtherNet/IP, the G9SP offers simple and flexible integration with the common standard PLCs in the market.  The G9SP makes it easy to add the flexibility and power of a safety controller to your safety solution.<ul>
<li>Three CPU-types to suit different applications</li>
<li>Clear diagnosis and monitoring via Ethernet (Omron FINS protocol), EtherNet/IP, or Serial (RS-232) connection</li>
<li>Supports direct connection with non-contact switches and safety mats</li>
<li>Memory cassette for easy duplication of configuration</li>
<li>Unique programming software to support easy design, verification, standardization and reusage of the program</li>
<li>Certified according to PLe (EN ISO 13849-1) and SIL 3 (IEC 61508)</li>
<li>READ NOW: Important Revision to G9SP Series Safety Controller Operation Manual</li>
</ul>

G9SP Safety Controller

Large machine safety solutions involve complicated commissioning as well as challenging maintenance activities. The NE1A Compact Safety Controller with DeviceNet Safety capabilities allows supporting safety components to be distributed over large systems reducing wiring and improving productivity. The NE1A can manage up to 32 DeviceNet safety connections and can integrate into any standard DeviceNet system.<ul>
<li>Removable cage-clamp terminals for easy installation</li>
<li>Predefined and certified function blocks for easy programming</li>
<li>LED display and status LEDs for advanced diagnostics</li>
<li>System status on DeviceNet for easy troubleshooting and predictive maintenance</li>
<li>Easy scalability through the addition of DeviceNet safety devices</li>
</ul>

NE1A Safety Network Controller

Meeting machine safety requirements and improving commissioning is a challenging task for maintenance teams and system integrators.  The NX-SL3 offers a cost-effective safety controller with a modular design making it easy to adapt to a variety of machine types and sizes. For retrofit projects, it offers a direct connection to any PLC using an EtherNet/IP coupler. For systems requiring remote I/O, the NX-SL3 can be combined with an EtherCAT coupler to enable Functional Safety over EtherCAT(FSoE), making the project seamless to operate and maintain.  The IDE of Sysmac Studio simplifies the safety configuration, programming, and maintenance, thanks to its unique features such as automatic programming, simple automatic test, and safety function verification.Complex safety challenges are simplified with NX safety control. Learn more about achieving the highest level of productivity and flexibility without compromising safety.<ul><li>The safety controller meets Category 4, PLe according to the EN ISO 13849-1 and SIL3 according to the IEC 61508</li><li>Up to 8 safety input points per unit</li><li>Safety Function Blocks conforming with IEC 61131-3 standard programming</li><li>PLCopen Function Blocks for safety Integration in one software, Sysmac Studio</li></ul>This safety controller uses the same hardware used on EtherCAT networks and EtherNet/IP connectivity for monitoring of status and informationSysmac Studio Software Full License supports EtherCAT integration and EtherNET/IP Stand-alone configuration of the NX-S modular safety I/O. Sysmac Studio Safety License supports only EtherNET/IP Stand-alone configuration of the NX-S modular safety I/O<h4>Safety Units</h4>

Programmable Safety Controllers

Expansion Remote I/O

Safety Controllers

Communications for Programmable Safety Controllers

Safety Controller Software

G9SP Accessories

DeviceNet Hardware

NE1A Spares

Popular Brands in Programmable Safety Controllers