Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

Pluto cable, HMI-panel ABB CP600 to Pluto programming port.

Pluto cable CP600

Identifier, read/write, for assigning an address to the Pluto it is connected to. Each Pluto connected to the Pluto safety bus needs an IDFIX. The IDFIX number is programmable, i.e. the user can choose the number.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

IDFIX-RW

DCN1-3C

DeviceNet T-branch tap for 3 branch lines, 5 connectors with screws, side cable entry

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.

Safety PLC with AS-i bus and Pluto safety bus. Totally 12 I/O: 4 failsafe inputs + 4 non-failsafe outputs/failsafe inputs + 2 individual failsafe relay outputs + 2 individual failsafe transistor outputs.

Pluto AS-i v2

Pluto AS-i v2 Programmable safety controller

DCN1-1P

DeviceNet power supply tap with 2 connectors, standard terminating resistor, and fuse

DCN1-2C

DeviceNet T-branch tap for 1 branch line, 3 connectors with screws, top cable entry

DCN1-4R

DeviceNet T-branch tap for 3 branch lines, 5 straight connectors with screws, side cable entry

DCN1-3NC

DeviceNet T-Branch tap for 3 branch lines, 5 parallel clamp connectors, top cable entry

XW4G-05C1-H1-D

DeviceNet connector, parallel screwless, connector insertion and wiring in same direction

XW4G-05C4-TF-D

DeviceNet connector, multi-branch parallel screwless, connector insertion and wiring in same direction.

GI-SID1224

Safety Remote I/O Terminal (CIP-S) with 2 port switching hub and 12 PNP S-Digital Inputs (12 Test Pulses)

<section><h2>Safety network controller NE1A</h2><div class='introduction'><p>The NE1A hosts the safety application program. All local and DeviceNet safety-based inputs and outputs are monitored and controlled by the NE1A. It manages up to 32 DeviceNet safety connections and can be seamlessly integrated in a standard DeviceNet system.</p><ul><li>Removable cage-clamp terminals for easy installation</li><li>Predefined and certified function blocks for easy programming</li><li>LED display and status LEDs for advanced diagnostics</li><li>System status on DeviceNet for easy troubleshooting and predictive maintenance</li><li>Easy scalability through the addition of DeviceNet safety devices</li></ul></div></section>

NE1A-EDR01

NX-CSG320

Safety Gateway for CIP-Safety, SD-Card slot, iBus connection up to 10 A, Interface 1: Ethernet/IP port, Interface 2: CIP-Safety switching ports

NX-SL5700

Safety controller, CIP-S and EtherCAT, 254 safety master connections, up to 2032 safety I/O, 4 MB memory capacity,  SD Backup/Restore supported

DCN1-4C

DeviceNet T-branch tap for 3 branch lines, 5 connectors with screws, top cable entry

NE1A-SCPU01-V1

Safety network controller, 16x PNP inputs, 8x PNP outputs, 4x test outputs

XW4B-05C4-TF-D

DeviceNet multi-branching connector, parallel with screws, connector insertion and wiring in same direction.

Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol PROFINET.

With the use of a Gateway device, Pluto can communicate with other control systems and thereby form a part of a larger network. The unit has a common interface with Pluto, i.e. the same cabling and the Pluto Manager software can be used for servicing and where necessary programming.

GATE-PN

DCN1-1C

DeviceNet T-branch tap for 1 branch line, 3 connectors with screws, side cable entry

DST1-MD16SL-1

Remote I/O terminal, DST1, 8 x PNP inputs, 8 x PNP outputs, 4 x test outputs

DRTCBL

Upgrading to a safety controller can be complicated due to the additional program development, troubleshooting and PLC integration.  The compact G9SP safety controller makes adding a safety controller simple. Ideal for small to mid-size applications, the G9SP safety controller has a user friendly programming environment, including embedded simulation and monitoring tools, that makes program development and troubleshooting easy and accessible.  With selectable communication modules supporting common protocols such as EtherNet/IP, the G9SP offers simple and flexible integration with the common standard PLCs in the market.  The G9SP makes it easy to add the flexibility and power of a safety controller to your safety solution.<ul>
<li>Three CPU-types to suit different applications</li>
<li>Clear diagnosis and monitoring via Ethernet (Omron FINS protocol), EtherNet/IP, or Serial (RS-232) connection</li>
<li>Supports direct connection with non-contact switches and safety mats</li>
<li>Memory cassette for easy duplication of configuration</li>
<li>Unique programming software to support easy design, verification, standardization and reusage of the program</li>
<li>Certified according to PLe (EN ISO 13849-1) and SIL 3 (IEC 61508)</li>
<li>READ NOW: Important Revision to G9SP Series Safety Controller Operation Manual</li>
</ul>


G9SP Safety Controller

Large machine safety solutions involve complicated commissioning as well as challenging maintenance activities. The NE1A Compact Safety Controller with DeviceNet Safety capabilities allows supporting safety components to be distributed over large systems reducing wiring and improving productivity. The NE1A can manage up to 32 DeviceNet safety connections and can integrate into any standard DeviceNet system.<ul>
<li>Removable cage-clamp terminals for easy installation</li>
<li>Predefined and certified function blocks for easy programming</li>
<li>LED display and status LEDs for advanced diagnostics</li>
<li>System status on DeviceNet for easy troubleshooting and predictive maintenance</li>
<li>Easy scalability through the addition of DeviceNet safety devices</li>
</ul>


Programmable Safety Controllers