Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol Modbus TCP.

With the use of a Gateway device, Pluto can communicate with other control systems and thereby form a part of a larger network. The unit has a common interface with Pluto, i.e. the same cabling and the Pluto Manager software can be used for servicing and where necessary programming.

GATE-MT

WS02-G9SP01-V2

G9SP Configurator, 1 license, WIN-2000/XP/Vista.

CP1W-CN811

I/O expansion cable for CP1-series, 80 cm

GI-SMD1624

Safety Remote I/O Terminal (CIP-S) with 2 port switching hub and 12 PNP S-Digital Inputs (12 Test Pulses) / 4 PNP S-Digital Output

A Safety Output Unit with 2 safety outputs, suitable for high-current applications, operating at 24 VDC and supporting SIL3 safety standards.

NX-SOH200

2 Digital Safety Outputs, PNP 24 VDC, 2.0 A/point, 4.0 A/NX Unit, screwless push-in connector, 12 mm wide

CP1W-ME05M

CP1 memory cassette (for upload/download of user program)

WS02-CFSC1-EV3

Tina 8A is a connection block for series connection of up to eight DYNlink devices. Eight M12-5 female connectors for the sensors are available on the device. The information signal of each device can be wired separately. The cable used for the connection to the Tina 8A should have a diameter 7 - 12 mm. Unused M12-connectors on Tina 8A must be equipped with Tina 1A blind plugs.

The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 8A

2TLJ020054R1800

2TLA020054R1800, Tina 12A Connection block with adaption unit for dynamic circuits. Two M12 8-pole connectors for sensor input. For example Dalton and Magne locks.

Tina 7A is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 7A is mounted on a DIN rail in the electrical cabinets and the connected safety device(s) must be mounted on the same cabinet, e.g. an emergency-stop button mounted on the cabinet. Electrical connection is made via detachable terminal blocks.

Tina 7A

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.

Safety PLC with Pluto safety bus. Totally 20 I/O: 8 failsafe inputs + 8 non-failsafe outputs/failsafe inputs + 2 individually failsafe relay outputs + 2 individually failsafe transistor outputs. Current monitoring on Q16 + Q17. NOTE: Version 2 hardware/processor.

Pluto A20 v2

Pluto A20 v2 Programmable safety controller

NX-SL3500 VER1.1

Safety controller, 128 safety master connections, up to 1024 safety I/O, 2MB memory capacity

TIna 10C v2 adapts the OSSD outputs of ABB optical safety devices to the DYNlink solution with possibility to power the transmitter. Tina 10C has one M12-5 male connector towards the DYNlink loop, one M12-8 female connector towards the OSSD device and one M12-5 female connector for the supply of the transmitter (0V and +24VDC).

The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 10C v2

Fixa is a handheld terminal for:
• Addressing and configuration of AS-i bus sensors.
• Addressing and configuration of sensors for the ABB StatusBus.
• Test of sensors for the AS-i bus, sensors for the ABB  DYNlink safety circuit, and common sensors with PNP output.

Three batteries of type NiMH AAA rechargeable must be used. Batteries are not included.

FIXA

Tina 11A is a connection block for serie connection of two DYNlink devices with M12-5 connectors. Two M12-5 female connectors for the devices and one M12-5 male connector towards the DYNlink loop.

The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 11A

TIna 10A v2 adapts the OSSD outputs of ABB optical safety devices to the DYNlink solution. Tina 10A v2 has one M12-5 male connector towards the DYNlink loop and one M12-8 female connector towards the OSSD device.

The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 10A v2

A Safety Input Unit featuring 4 digital safety inputs, designed for integrating safety devices directly into automation systems, supporting SIL3 safety standards.

NX-SIH400 VER1.1

4 Digital Safety Inputs, PNP 24 VDC, high connectivity unit, screwless push-in connector, 12 mm wide

Tina 2A is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2A is mounted directly on the device enclosure to a M20 cable entry.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 2A

Terminating resistor for Pluto safety bus. Delivered with each Pluto. Necessary for each stand-alone Pluto and on the Pluto units at each end of the Pluto safety bus. Should be removed from the other Pluto units.

R120 Resistor

DCN1-1NC

DeviceNet T-Branch tap for 1 branch line, 3 parallel clamp connectors, top cable entry

DRTCBL

Upgrading to a safety controller can be complicated due to the additional program development, troubleshooting and PLC integration.  The compact G9SP safety controller makes adding a safety controller simple. Ideal for small to mid-size applications, the G9SP safety controller has a user friendly programming environment, including embedded simulation and monitoring tools, that makes program development and troubleshooting easy and accessible.  With selectable communication modules supporting common protocols such as EtherNet/IP, the G9SP offers simple and flexible integration with the common standard PLCs in the market.  The G9SP makes it easy to add the flexibility and power of a safety controller to your safety solution.<ul>
<li>Three CPU-types to suit different applications</li>
<li>Clear diagnosis and monitoring via Ethernet (Omron FINS protocol), EtherNet/IP, or Serial (RS-232) connection</li>
<li>Supports direct connection with non-contact switches and safety mats</li>
<li>Memory cassette for easy duplication of configuration</li>
<li>Unique programming software to support easy design, verification, standardization and reusage of the program</li>
<li>Certified according to PLe (EN ISO 13849-1) and SIL 3 (IEC 61508)</li>
<li>READ NOW: Important Revision to G9SP Series Safety Controller Operation Manual</li>
</ul>


G9SP Safety Controller

Large machine safety solutions involve complicated commissioning as well as challenging maintenance activities. The NE1A Compact Safety Controller with DeviceNet Safety capabilities allows supporting safety components to be distributed over large systems reducing wiring and improving productivity. The NE1A can manage up to 32 DeviceNet safety connections and can integrate into any standard DeviceNet system.<ul>
<li>Removable cage-clamp terminals for easy installation</li>
<li>Predefined and certified function blocks for easy programming</li>
<li>LED display and status LEDs for advanced diagnostics</li>
<li>System status on DeviceNet for easy troubleshooting and predictive maintenance</li>
<li>Easy scalability through the addition of DeviceNet safety devices</li>
</ul>


NE1A Safety Network Controller

<p>Meeting machine safety requirements and improving commissioning is a challenging task for maintenance teams and system integrators.  The NX-SL3 offers a cost-effective safety controller with a modular design making it easy to adapt to a variety of machine types and sizes. For retrofit projects, it offers a direct connection to any PLC using an EtherNet/IP coupler. For systems requiring remote I/O, the NX-SL3 can be combined with an EtherCAT coupler to enable Functional Safety over EtherCAT(FSoE), making the project seamless to operate and maintain.  The IDE of Sysmac Studio simplifies the safety configuration, programming, and maintenance, thanks to its unique features such as automatic programming, simple automatic test, and safety function verification.</p><p>Complex safety challenges are simplified with NX safety control. Learn more about achieving the highest level of productivity and flexibility without compromising safety.</p><ul><li>The safety controller meets Category 4, PLe according to the EN ISO 13849-1 and SIL3 according to the IEC 61508</li><li>Up to 8 safety input points per unit</li><li>Safety Function Blocks conforming with IEC 61131-3 standard programming</li><li>PLCopen Function Blocks for safety Integration in one software, Sysmac Studio</li></ul><p>This safety controller uses the same hardware used on EtherCAT networks and EtherNet/IP connectivity for monitoring of status and informationSysmac Studio Software Full License supports EtherCAT integration and EtherNET/IP Stand-alone configuration of the NX-S modular safety I/O. Sysmac Studio Safety License supports only EtherNET/IP Stand-alone configuration of the NX-S modular safety I/O</p><h4>Safety Units</h4>

Programmable Safety Controllers