Official DistributorSKU
MPN
MACX MCR-VDC-PT
Weight
0.226 kg
This product is Not Cancellable/Not Returnable
MACX MCR-VDC-PT - Voltage measuring transducers
MACX MCR voltage transducers for DC voltages of 0... (+/-) 20 V DC to 0.. .(+/-) 660 V DC, output signal (+/-) 10 V/ (+/-)20 mA
- Adjustable voltage ranges
- Bidirectional output signals
- 3-way isolation
- ZERO/SPAN adjustment ±20 %
- Tool-free parameterization of measured values
- Teach-in configuration of the measured value range
Technical Specifications
Electrical properties
| Alignment span | ± 20 % |
| Alignment zero | ± 20 % |
| Maximum power dissipation for nominal condition | 1.2 W |
| Protective circuit | Surge protection; 33 V suppressor diode |
| Step response (10-90%) | < 16 ms |
| Maximum temperature coefficient | < 0.015 %/K |
| Maximum transmission error | < 1 % (of measuring range end value) |
Electrical isolation
| Pollution degree | 2 |
Electrical isolation Measuring circuit to supply circuit and output IEC 61010-2-030
| Standards/regulations | IEC 61010-2-030 |
| Test voltage | 5.3 kV AC (50 Hz, 60 s) |
| Measuring category | II (1000 V) |
| Measuring category | III (600 V) |
| Measuring category | IV (300 V) |
| Insulation | Reinforced insulation |
Electrical isolation Supply circuit to output circuit IEC 61010-1
| Standards/regulations | IEC 61010-1 |
| Test voltage | 2.2 kV AC (50 Hz, 60 s) |
| Overvoltage category | III (300 V) |
| Overvoltage category | IV (150 V) |
| Insulation | Basic insulation |
Supply
| Nominal Supply Voltage | 24 V DC (-20 % ... +25 %) |
| Supply Voltage Range | 19.2 V DC ... 30 V DC |
| Max. current consumption | < 60 mA |
Measurement
| Configurable/programmable | Yes |
| Input voltage range | -550 V DC ... 550 V DC |
| Input resistance of voltage input | 5500 kΩ |
| Maximum input voltage | ± 660 V DC |
| Impulse form | DC voltage |
| Input voltage range | -370 V DC ... 370 V DC |
| Input resistance of voltage input | 3700 kΩ |
| Input voltage range | -250 V DC ... 250 V DC |
| Input resistance of voltage input | 2500 kΩ |
| Input voltage range | -170 V DC ... 170 V DC |
| Input resistance of voltage input | 1700 kΩ |
| Input voltage range | -120 V DC ... 120 V DC |
| Input resistance of voltage input | 1200 kΩ |
| Input voltage range | -80 V DC ... 80 V DC |
| Input resistance of voltage input | 800 kΩ |
| Input voltage range | -54 V DC ... 54 V DC |
| Input resistance of voltage input | 800 kΩ |
| Input voltage range | -36 V DC ... 36 V DC |
| Input resistance of voltage input | 800 kΩ |
| Input voltage range | -24 V DC ... 24 V DC |
| Input resistance of voltage input | 240 kΩ |
Signal: Voltage
| Voltage output signal | -10 V ... 10 V |
| Max. voltage output signal | ≤ 11 V |
| Load/output load voltage output | > 10 kΩ |
| Ripple | 50 mV |
Signal: Current
| Current Output Signal | -20 mA ... 20 mA |
| Max. current output signal | ≤ 22 mA |
| Load/Output Load Current Output | < 500 Ω |
| Max. capacitive load | < 1000 pF |
| Max. inductive load | < 1 mH |
Connection data
| Connection Method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
Dimensions
| Width | 22.5 mm |
| Height | 118 mm |
| Depth | 114 mm |
Material specifications
| Color | gray (RAL 7042) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C (non-condensing) |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
UKCA
| Certificate | UKCA-compliant |
UL, USA/Canada
| Identification | UL 61010 Listed |
EMC data
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Noise immunity | EN 61000-6-2 |
| Note | When being exposed to interference, there may be minimal deviations. |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | Can be aligned with spacing = 10 mm |
| Mounting Position | any |
Why Proax for Phoenix Contact 2906243?
Proax is an authorized distributor of Phoenix Contact 2906243 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
DUMMY (no function); configurable 3-way isolation amplifier with safe, electrical isolation and wide-range supply. DIP switch on front, more than 1600 signal conversions can be set. Screw connection, approvals
MACX MCR-SL-2NAM-T - NAMUR 2-channel signal conditioner for operating proximity sensors and switches. The signals are transmitted to the control level via transistor outputs (passive). Line fault detection, 3-way electrical isolation, SIL 2, screw connection.
MACX MCR-SL-2NAM-RO - NAMUR 2-channel signal conditioner for operating proximity sensors and switches. The signals are transferred to the control level using relay outputs (N/O contact). Line fault detection, 3-way electrical isolation, SIL 2, screw connection.
MACX MCR-SL-2NAM-RO-SP - NAMUR 2-channel signal conditioner for operating proximity sensors and switches. The signals are transferred to the control level using relay outputs (N/O contact). Line fault detection, 3-way electrical isolation, SIL 2, Push-in connection.
MACX MCR-SL-2NAM-R-UP - 2-channel NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Line fault detection (LFD), 3-way isolation, screw connection, SIL 2.
MACX MCR-SL-2NAM-R-UP-SP - 2-channel NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Line fault detection (LFD), 3-way isolation, Push-in connection, SIL 2.
MACX MCR-SL-2NAM-T-SP - NAMUR 2-channel signal conditioner for operating proximity sensors and switches. The signals are transmitted to the control level via transistor outputs (passive). Line fault detection, 3-way electrical isolation, SIL 2, Push-in connection.
