Official DistributorSKU
MPN
MACX MCR-VDC
Weight
0.231 kg
MACX MCR-VDC - Voltage measuring transducers
MACX MCR voltage transducers for DC voltages of 0... (+/-) 20 V DC to 0.. .(+/-) 660 V DC, output signal (+/-) 10 V/ (+/-)20 mA
- Adjustable voltage ranges
- Bidirectional output signals
- 3-way isolation
- ZERO/SPAN adjustment ±20 %
- Tool-free parameterization of measured values
- Teach-in configuration of the measured value range
Technical Specifications
Electrical properties
| Alignment span | ± 20 % |
| Alignment zero | ± 20 % |
| Maximum power dissipation for nominal condition | 1.2 W |
| Protective circuit | Surge protection; 33 V suppressor diode |
| Step response (10-90%) | < 16 ms |
| Maximum temperature coefficient | < 0.015 %/K |
| Maximum transmission error | < 1 % (of measuring range end value) |
Electrical isolation
| Pollution degree | 2 |
Electrical isolation Measuring circuit to supply circuit and output IEC 61010-2-030
| Standards/regulations | IEC 61010-2-030 |
| Test voltage | 5.3 kV AC (50 Hz, 60 s) |
| Measuring category | II (1000 V) |
| Measuring category | III (600 V) |
| Measuring category | IV (300 V) |
| Insulation | Reinforced insulation |
Electrical isolation Supply circuit to output circuit IEC 61010-1
| Standards/regulations | IEC 61010-1 |
| Test voltage | 2.2 kV AC (50 Hz, 60 s) |
| Overvoltage category | III (300 V) |
| Overvoltage category | IV (150 V) |
| Insulation | Basic insulation |
Supply
| Nominal Supply Voltage | 24 V DC (-20 % ... +25 %) |
| Supply Voltage Range | 19.2 V DC ... 30 V DC |
| Max. current consumption | < 60 mA |
Measurement
| Configurable/programmable | Yes |
| Input voltage range | -550 V DC ... 550 V DC |
| Input resistance of voltage input | 5500 kΩ |
| Maximum input voltage | ± 660 V DC |
| Impulse form | DC voltage |
| Input voltage range | -370 V DC ... 370 V DC |
| Input resistance of voltage input | 3700 kΩ |
| Input voltage range | -250 V DC ... 250 V DC |
| Input resistance of voltage input | 2500 kΩ |
| Input voltage range | -170 V DC ... 170 V DC |
| Input resistance of voltage input | 1700 kΩ |
| Input voltage range | -120 V DC ... 120 V DC |
| Input resistance of voltage input | 1200 kΩ |
| Input voltage range | -80 V DC ... 80 V DC |
| Input resistance of voltage input | 800 kΩ |
| Input voltage range | -54 V DC ... 54 V DC |
| Input resistance of voltage input | 800 kΩ |
| Input voltage range | -36 V DC ... 36 V DC |
| Input resistance of voltage input | 800 kΩ |
| Input voltage range | -24 V DC ... 24 V DC |
| Input resistance of voltage input | 240 kΩ |
Signal: Voltage
| Voltage output signal | -10 V ... 10 V |
| Max. voltage output signal | ≤ 11 V |
| Load/output load voltage output | > 10 kΩ |
| Ripple | 50 mV |
Signal: Current
| Current Output Signal | -20 mA ... 20 mA |
| Max. current output signal | ≤ 22 mA |
| Load/Output Load Current Output | < 500 Ω |
| Max. capacitive load | < 1000 pF |
| Max. inductive load | < 1 mH |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
Dimensions
| Width | 22.5 mm |
| Height | 113 mm |
| Depth | 114 mm |
Material specifications
| Color | gray (RAL 7042) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C (non-condensing) |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
UKCA
| Certificate | UKCA-compliant |
UL, USA/Canada
| Identification | UL 61010 Listed |
EMC data
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Noise immunity | EN 61000-6-2 |
| Note | When being exposed to interference, there may be minimal deviations. |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | Can be aligned with spacing = 10 mm |
| Mounting Position | any |
Why Proax for Phoenix Contact 2906242?
Proax is an authorized distributor of Phoenix Contact 2906242 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
DUMMY (no function); configurable 3-way isolation amplifier with safe, electrical isolation and wide-range supply. DIP switch on front, more than 1600 signal conversions can be set. Screw connection, approvals
MACX MCR-SL-CAC-12-I-UP - Current measuring transducer for 5 A and 12 A AC, the output signal 0...20 mA or 4...20 mA, can be configured using a DIP switch with an operating mode indication through an LED
MACX MCR-SL-CAC- 5-I - Current measuring transducer for 1 A and 5 A AC, the output signal 0...20 mA or 4...20 mA, can be configured using a DIP switch with an operating mode indication through an LED
MACX MCR-SL-CAC- 5-I-UP - Current measuring transducer for 1 A and 5 A AC, the output signal 0...20 mA or 4...20 mA, can be configured using a DIP switch with an operating mode indication through an LED
MACX MCR-SL-IDSI-I - Output signal conditioner, HART. Isolates and transmits 0/4 - 20 mA signals to a load (I/P converters, regulating valves, displays). Open-circuit detection, SIL 2 in accordance with IEC 61508, screw connection. Replacement item: 2908063 MACX MCR-IDS-I-I.
MACX MCR-SL-IDSI-I-SP, Output signal conditioner, HART. Isolates and transmits 0/4-20 mA signals to a load (I/P converters, control valves, displays). Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508, Push-in connection.
