Official DistributorSKU
MPN
VAL-SEC-T2-GDT-400DC-P
Weight
0.05 kg
Series VAL-SEC-T2
VAL-SEC-T2-GDT-400DC-P - Type 2 surge protection plug
Replacement plug for surge protective devices from the VALVETRAB SEC product range for DC power sources. Protection of the path to the ground for 48 und 120 V DC.
Technical Specifications
General
| Note | The VAL-SEC-T2-GDT-400DC-P protective plug (Item No..: 1052632) is only to be used in series connection with a VAL-SEC-T2-48DC-P (Item No..: 2907877) or VAL-SEC-T2- 120DC-P (Item No..: 2907878). It is not designed for direct use on mains voltage. |
| Note | Uagn ≥ 300 V |
Product properties
| Product family | SEC Family |
| IEC test classification | II |
| IEC test classification | T2 |
| EN type | T2 |
| IEC power supply system | DC |
| Type | Male |
| Number of Positions | 1 |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Connection data
| Connection Method | pluggable |
Dimensions
| Width | 11.7 mm |
| Height | 46.4 mm |
| Depth | 59.4 mm |
| Horizontal pitch | 0.6 Div. |
Material specifications
| Color | light grey (RAL 7035) |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA6.6-FR 20% GF |
| Insulating material | PBT-FR |
| Material group | I |
| Housing Material | PA 6.6-FR 20 % GF |
| Housing Material | PBT-FR |
Protective circuit
| Mode of protection | (DC+/DC-) - PE |
| Residual current IPE | ≤ 5 µA |
| Nominal discharge current In (8/20) µs | 20 kA |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Voltage protection level Up | ≤ 0.95 kV |
| Residual voltage Ures | ≤ 0.4 kV (at In) |
| Residual voltage Ures | ≤ 0.4 kV (at 10 kA) |
| Residual voltage Ures | ≤ 0.4 kV (at 5 kA) |
| Residual voltage Ures | ≤ 0.4 kV (at 4 kA) |
| Residual voltage Ures | ≤ 0.4 kV (at 2 kA) |
| Front of wave sparkover voltage at 6 kV (1.2/50) µs | ≤ 0.95 kV |
| Response time tA | ≤ 100 ns |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 6000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (Operation) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
Standards and Regulations
| Standards/specifications | IEC 61643-11 |
| Note | 2011 |
EN 61643-11
| Standards/specifications | EN 61643-11 |
| Note | 2012 |
Mounting
| Mounting Type | on base element |
Accessories
Why Proax for Phoenix Contact 1052632?
Proax is an authorized distributor of Phoenix Contact 1052632 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Replacement plug for surge arresters from the VALVETRAB SEC product range for L-N and L-PEN paths.
