Buy Phoenix Contact PLC-RSP- 24UC/21/RW 2987011

Official Distributor

By Phoenix Contact

SKU

MPN

PLC-RSP- 24UC/21/RW

Weight

0.034 kg

This product has been discontinued and replaced with 2900318

Series PLC-RSP

PLC-RSP- 24UC/21/RW - Relay Module

PLC-INTERFACE for railway applications, consisting of basic terminal block with spring-cage connection and plug-in miniature relay with power contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 changeover contact, input voltage 24 V DC

Optimum relay operation thanks to wide-range electronics
Certified in accordance with EN 50155
Safe isolation between coil and contact side
Vibration and shock resistance in accordance with EN 50155
Input voltage range of 0.7 to 1.25 x UN (1.4 x UN briefly)
Temperature range: -40 °C ... + 70 °C (short-term 85 °C)

Technical Specifications

Product properties

Product family	PLC-INTERFACE
Application	Railway applications
Installation location	Attached to the vehicle body
Operating mode	100% operating factor
Mechanical service life	approx. 2x 10⁷ cycles

Insulation characteristics

Overvoltage category	III
Pollution degree	2

Electrical properties

Maximum power dissipation for nominal condition	0.22 W
Test voltage (Winding/contact)	4 kVrms (50 Hz, 1 min., winding/contact)
Rated Insulation Voltage	250 V AC
Rated surge voltage	6 kV

Coil side

Nominal input voltage U_N	24 V DC
Input voltage range	16.8 V DC ... 30 V DC
Input voltage range in reference to U_N	0.7 ... 1.25
Drive and function	monostable
Typical input current at U_N	9 mA
Typical response time	4 ms
Typical release time	4 ms
Coil Voltage	12 V DC
Protective circuit	Bridge rectifier; Bridge rectifier
Protective circuit	Freewheeling diode; Freewheeling diode
Protective circuit	Surge protection
Protective circuit	RCZ filter
Protective circuit	Wide-range electronics
Operating voltage display	Yellow LED

Switching

Contact switching type	1 changeover contact
Type of switch contact	Single contact
Contact Material	AgSnO
Maximum Switching Voltage	250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Minimum Switching Voltage	5 V (at 100 mA)
Limiting Continuous Current	6 A
Maximum Inrush Current	on request
Min. switching current	10 mA (at 12 V)
Interrupting rating (ohmic load) max.	140 W (at 24 V DC)
Interrupting rating (ohmic load) max.	20 W (at 48 V DC)
Interrupting rating (ohmic load) max.	18 W (at 60 V DC)
Interrupting rating (ohmic load) max.	23 W (at 110 V DC)
Interrupting rating (ohmic load) max.	40 W (at 220 V DC)
Interrupting rating (ohmic load) max.	1500 W (for 250 V AC)
Switching capacity	1 A (at 24 V, DC13)
Switching capacity	0.2 A (at 110 V, DC13)
Switching capacity	0.1 A (at 220 V, DC13)
Switching capacity	3 A (at 24 V, AC15)
Switching capacity	3 A (at 120 V, AC15)
Switching capacity	3 A (at 230 V, AC15)

Coil side

Connection Method	Spring-cage connection
Stripping length	8 mm
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	26 ... 14

Contact side

Connection Method	Spring-cage connection
Stripping length	8 mm
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	26 ... 14

Dimensions

Width	6.2 mm
Height	80 mm
Depth	94 mm

Material specifications

Color	green (RAL 6021)
Flammability rating according to UL 94	V0 (Housing)

Ambient conditions

Degree of protection (Relay)	RT III (Relay)
Degree of protection (Relay base)	IP20 (Relay base)
Ambient Temperature (Operation)	-40 °C ... 70 °C (Temperature class TX)
Ambient temperature (storage/transport)	-40 °C ... 85 °C

Standards and Regulations

Standards/regulations	EN 50155 (VDE 0115 part 200)
Standards/regulations	IEC 60947-5-1
Standards/regulations	EN 61373
Standards/regulations	EN 50121

Mounting

Mounting Type	DIN rail mounting
Assembly instructions	in rows with zero spacing
Mounting Position	any

Accessories

0801377
NS 35/ 7,5 V2A UNPERF 2000MM - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Stainless steel V2A, uncoated, Standard profile, color: silver
0801762
NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
1201714
NS 35/15 UNPERF 2000MM - DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
1201895
NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
1201798
NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile 2.3 mm, color: silver
1201756
NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
1201730
NS 35/15 PERF 2000MM - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
0801681
NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
2966508
PLC-ESK GY - Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
2966841
Separating plate - PLC-ATP BK
1204517
Screwdriver - SZF 1-0,6X3,5
1051003
Zack marker strip - ZB 6:UNBEDRUCKT
1051016
1051016 -
5060935
Zack marker strip - ZB 6/WH-100:UNBEDRUCKT
0818085
Marker for terminal blocks - UC-TM 6
0828736
Marker for terminal blocks - UCT-TM 6
2966786
FBST 500-PLC RD - Continuous plug-in bridge, length: 500 mm, color: red
2966692
FBST 500-PLC BU - Continuous plug-in bridge, length: 500 mm, color: blue
2966838
FBST 500-PLC GY - Continuous plug-in bridge, length: 500 mm, color: gray
2966236
Single plug-in bridge - FBST 6-PLC RD
2966812
Single plug-in bridge - FBST 6-PLC BU
2966825
Single plug-in bridge - FBST 6-PLC GY
2967688
Single plug-in bridge - FBST 8-PLC GY

Why Proax for Phoenix Contact 2987011?

Proax is an authorized distributor of Phoenix Contact 2987011 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time

Highly Trained Staff

Live Chat

Technical Support

Local Inventory

60+ Years Experience

Additional Information

Pack Size

Recommended

2912510
PLC-RSP- 24UC/21-21, PLC relay, consisting of basic terminal block PLC-BSP.../21-21 with spring-cage connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 2 PDT, input voltage 24 V AC/DC
2912581
PLC-RSP- 24UC/21-21AU, PLC-INTERFACE, consisting of PLC-BSP.../21-21AU basic terminal block with spring-cage connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V AC
2987118
PLC-RSP- 24UC/21-21AU/RW, PLC-INTERFACE for railway applications, consisting of basic terminal block with spring-cage connection and plug-in miniature relay with multi-layer gold contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 2 PDTs, input voltage 24 V DC
2987105
PLC-RSP- 24UC/21-21/RW, PLC-INTERFACE for railway applications, consisting of basic terminal block with spring-cage connection and plug-in miniature relay with power contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 2 PDTs, input voltage 24 V DC
2966553
PLC-RSP- 24UC/21AU, PLC-INTERFACE, consisting of PLC-BSP.../21 basic terminal block with spring-cage connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V AC/DC
2987024
PLC-RSP- 24UC/21AU/RW, PLC-INTERFACE for railway applications, consisting of basic terminal block with spring-cage connection and plug-in miniature relay with multi-layer gold contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 PDT, input voltage 24 V DC
2966485
PLC-RSP- 24UC/21, PLC relay, consisting of base terminal block PLC-BSP.../21 with spring-cage connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V AC/DC
2912280
PLC-RSP- 24UC/21HC - Single contact relay
2987079
PLC-RSP- 24UC/21HC/RW, PLC-INTERFACE for railway applications and high continuous currents, consisting of basic terminal block with spring-cage connection and plug-in miniature relay, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 PDT, input voltage 24 V DC
2982249
PLC-RSP- 24UC/1/S/H - PLC switch
2834889
PLC-INTERFACE with switch (operation using a screwdriver) for “Manual, Zero, and Automatic” functions, with spring-cage connection and integrated power contact relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V AC/DC
2912507
PLC-RSP- 24DC/21-21, PLC-INTERFACE, consisting of PLC-BSP.../21 basic terminal block with spring-cage connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 2 changeover contacts, 24 V DC input voltage
2912578
PLC-RSP- 24DC/21-21AU, PLC-INTERFACE, consisting of PLC-BSP.../21-21AU basic terminal block with spring-cage connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V DC
2966540
PLC-RSP- 24DC/21AU, PLC-INTERFACE, consisting of PLC-BSP.../21 basic terminal block with spring-cage connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V DC
2966472
PLC-RSP- 24DC/21, PLC relay, consisting of base terminal block PLC-BSP.../21 with spring-cage connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V DC
2912277
PLC-RSP- 24DC/21HC, PLC-INTERFACE for high continuous currents, consisting of PLC-BSP.../21 HC basic terminal block with spring-cage connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 PDT, input voltage 24 V DC
2967345
PLC-RSP- 24DC/ 1/ACT, PLC-INTERFACE for output functions, consisting of PLC-BSP.../ACT basic terminal block with spring-cage connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
2967374
PLC-RSP-24DC/1AU/SEN PLC relay+base, spring-cage 1N/O 24VDC
2912413
PLC-RSP- 24DC/ 1IC/ACT, PLC-INTERFACE for high switch-on currents, consisting of PLC-BSP.../1 IC/ACT basic terminal block with spring-cage connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 24 V DC
2912497
PLC-RSP- 12DC/21-21, PLC-INTERFACE, consisting of PLC-BSP.../21 basic terminal block with spring-cage connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 12 V DC

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability