Official Distributor
SKU
MPN
QUINT-PS-3X400-500AC/24DC/30
Weight
3.863 kg
Series QUINT-PS
QUINT-PS-3X400-500AC/24DC/30 - Power supply unit
DIN rail power supply unit 24 V DC/30 A, primary switched-mode, 3-phase.
Technical Specifications
AC operation
Nominal input voltage range | 3x 400 V AC ... 500 V AC |
Input voltage range | 3x 320 V AC ... 575 V AC (for all three phases) |
Input voltage range | 450 V DC ... 800 V DC |
Input Voltage Range AC | 3x 320 V AC ... 575 V AC (for all three phases) |
Input voltage range DC | 450 V DC ... 800 V DC |
Voltage type of supply voltage | AC/DC |
Inrush Current | < 15 A (typical) |
AC frequency range | 45 Hz ... 65 Hz |
Frequency range DC | 0 Hz |
Mains buffering time | > 20 ms (at 3 x 400 V AC) |
Mains buffering time | > 20 ms (at 3 x 480 V AC) |
Current consumption | approx. 3x 2.1 A (400 V AC) |
Current consumption | 3x 1.7 A (480 V AC) |
Nominal Power Consumption | 720 W |
Typical response time | < 1 s |
Input fuse | Externally via 3 circuit breakers 6 A, 10 A or 16 A, characteristic B |
Output data
Efficiency | > 92 % |
Nominal Output Voltage | 24 V DC ±1 % |
Setting range of the output voltage (USet) | 22.5 V ... 28.5 V |
Nominal output current (IN) | 30 A (up to 60 °C) |
POWER BOOST (IBoost) | 35 A |
Residual ripple | < 100 mVPP |
Output Power | 720 W |
Peak switching voltages nominal load | < 100 mVPP (20 MHz) |
Maximum no-load power dissipation | < 14 W |
Power loss nominal load max. | < 62 W |
Connection in parallel | yes, for assembling redundant systems and increasing efficiency |
Connection in series | yes |
Signal: Active
Output description | UOUT > 0.9 x UN: High signal |
Output Voltage | + 24 V DC (Signal) |
Continuous load current | max. 40 mA |
Signal: floating
Output description | Relay contact, UOUT > 0.9 x UN: Contact closed |
Maximum Switching Voltage | ≤ 30 V AC/DC |
Maximum Inrush Current | ≤ 1 A |
Continuous load current | ≤ 1 A |
Input
Connection Method | Screw connection |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 6 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 4 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 10 |
Stripping length | 8 mm |
Screw thread | M3 |
Output
Connection Method | Screw connection |
Conductor cross section, rigid min. | 0.5 mm² |
Conductor cross section, rigid max. | 16 mm² |
Conductor cross section flexible min. | 0.5 mm² |
Conductor cross section flexible max. | 10 mm² |
Conductor cross section AWG min. | 20 |
Conductor cross section AWG max. | 6 |
Stripping length | 10 mm |
Signaling
Operating voltage display | Green LED |
Signal output: Active
Status display | Green LED (Uout < 0.9 x UN: LED flashes) |
Electrical properties
Insulation voltage input/output | 2 kV (routine test) |
Insulation voltage input/output | 4 kV (type test) |
Product properties
Product family | QUINT POWER |
MTBF (IEC 61709, SN 29500) | > 500000 h |
Insulation characteristics
Protection class | I (with PE connection) |
Dimensions
Width | 240 mm |
Height | 130 mm |
Depth | 130 mm |
Alternative assembly
Width | 122 mm |
Height | 243 mm |
Depth | 243 mm |
Mounting
Assembly instructions | alignable: vertical with spacing = 5 cm |
Mounting Position | On horizontal DIN rail NS 35 in acc. with EN 60715 |
Material specifications
Housing Material | Metal |
Type of housing | AluNox (AlMg1) |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
Standards and Regulations
Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
Standard - Electrical safety | EN 61558-2-17 |
Standard - Safe isolation | DIN VDE 0100-410 |
EMC data
EMC requirements for noise immunity | EN 61000-6-2 |
Electromagnetic compatibility | Conformance with EMC directive 89/336/EC |
Noise emission | EN 55011 (EN 55022) |
Why Proax for Phoenix Contact 2938633?
Proax is an authorized distributor of Phoenix Contact 2938633 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended