Official DistributorSKU
MPN
TC MOBILE I/O X200
Weight
0.248 kg
Series TC-MOBILE-I-O-X
TC MOBILE I/O X200 - SMS relay
SMS relay and signaling module, monitor analog and digital values via cellular network and switch relay outputs remotely, communication via SMS and GPRS (e-mail transmission, app), supply voltage range 10 V ... 60 V AC
- Notification via SMS on change of status at input
- SMS status query of all inputs and outputs
- SMS relay for remote control of outputs
- Alarm generation on voltage failure via SMS
- GSM mobile phone network: 850, 900, 1800, and 1900 MHz
- Switching of outputs for a predefined time
- Communication via SMS and e-mail
- Two analog inputs
- Configuration via USB and web browser
- Compact design also for domestic installations (4 HP, DIN 43880)
- Mounting on DIN rail or on the wall
Technical Specifications
Utilization restriction
| CCCex note | Use in potentially explosive areas is not permitted in China. |
Product properties
| MTTF | 692 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 338 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
| MTTF | 134 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Electrical properties
| Maximum power dissipation for nominal condition | 3.85 W |
| Mains type | Cellular communication |
Supply
| Supply Voltage Range | 10 V DC ... 60 V DC |
| Typical current consumption | 50 mA (24 V DC) |
| Max. current consumption | 80 mA |
Digital
| Description of the input | Digital input |
| Number of Inputs | 4 |
| Switching threshold "0" signal in reference to UN | ≤ 0.3 |
| Switching threshold "1" signal in reference to UN | ≥ 0.7 |
Analog
| Description of the input | Analog input |
| Number of Inputs | 2 |
| Input Signal | Current or voltage |
| Resolution | 15 bit |
| Input Impedance | 600 kΩ (Voltage inputs) |
| Input Impedance | 50 Ω (Current inputs) |
| Voltage input signal | 0 V DC ... 60 V DC |
| Current Input Signal | 0 mA ... 20 mA |
| Current Input Signal | 4 mA ... 20 mA (configurable) |
| Precision | ± 0.1 % |
Switching
| Output name | Relay output |
| Number of Outputs | 4 |
| Contact switching type | N/O contact |
| Minimum Switching Voltage | 5 V |
| Maximum Switching Voltage | 60 V DC |
| Maximum Switching Voltage | 30 V AC |
| Limiting Continuous Current | 6 A |
| Switching capacity | 100 W (Power Source PS2, Pout ≤100 W) |
| Electrical service life | 5000 cycles |
Supply
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.20 mm² ... 2.50 mm² |
| Conductor cross section, rigid | 0.20 mm² ... 2.50 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Stripping length | 6.50 mm |
| Tightening torque | 0.5 Nm ... 0.6 Nm (5-7 lbs-in, screw terminal blocks) |
Interfaces
| Web server | yes |
Data: USB 2.0
| Connection Method | Mini-USB type B, 5-pos. |
| Transmission length | ≤ 3 m (only for configuration and diagnostics) |
Wireless
| Interface description | GSM / GPRS |
| Frequency Range | 850 MHz (2 W (EGSM)) |
| Frequency Range | 900 MHz (2 W (EGSM)) |
| Frequency Range | 1800 MHz (1 W (EGSM)) |
| Frequency Range | 1900 MHz (1 W (EGSM)) |
| GPRS | Multislot Class 10 |
Dimensions
| Width | 72 mm |
| Height | 90 mm |
| Depth | 62 mm |
Material specifications
| Color (Upper housing part) | light grey (RAL 7035) |
| Color (Lower housing part) | black (RAL 9005) |
| Material (Housing) | Polycarbonate |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 70 °C (SMS mode only, note the derating information in the technical documentation for data connection) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | 2000 m |
| Permissible humidity (operation) | 0 % ... 95 % |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II 3 G Ex nA nC IIC T4 Gc X |
| Note | Please follow the special installation instructions in the documentation! |
Wireless approval USA, FCC
| Note | Part 15.107(a), 15.109(a) |
Corrosive gas test
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
Wireless approval, Europe
| Note | RED 2014/53/EU |
EMC data
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Conducted noise emission | Class B, area of application: Industry and residential |
Electrostatic discharge
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | ± 6 kV |
| Discharge in air | ± 8 kV |
| Indirect discharge | ± 6 kV |
| Comments | Criterion B |
Electromagnetic HF field
| Standards/regulations | EN 61000-4-3 |
| Frequency Range | 26 MHz ... 6 GHz |
| Field intensity | 10 V/m |
| Comments | Criterion A |
Fast transients (burst)
| Standards/regulations | EN 61000-4-4 |
| Input | ± 2 kV (Unshielded supply line) |
| Signal | ± 2 kV (Shielded signal line) |
| Signal | ± 2 kV (Analog I/O cables, unshielded) |
| Comments | Criterion B |
Surge current load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | ± 0.5 kV (Symmetrical, unshielded supply line) |
| Input | ± 0.5 kV (Asymmetrical, unshielded supply line) |
| Signal | ± 1 kV (Data line, asymmetrical) |
| Comments | Criterion B |
Conducted interference
| Standards/regulations | EN 61000-4-6 |
| Frequency Range | 0.15 MHz ... 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V |
Emitted interference
| Emitted radio interference in acc. with EN 55011 | Class B, area of application: Industry and residential |
Criteria
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Standards and Regulations
| Standards/regulations | EN 50360 |
| Standards/regulations | EN 50121-4 |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
2313342 - Mobile communication antenna for direct mounting on the device, SMA (male) antenna connector with articulated joint. The antenna is suitable for installation in plastic control cabinets not visible from the outside.
2313371 - GSM UMTS antenna, with omnidirectional characteristic, 2 m antenna cable with SMA round connector
2702273 - Multiband omnidirectional antenna for wall or mast mounting, 0.6 GHz ... 6 GHz, gain: 3 dBi ... 7 dBi, degree of protection: IP66, connection: SMA (male), incl. 5 m connecting cable, mounting bracket, and mast clamps
2900981 - Cellular antenna cable, 10 m in length, SMA (male) -> SMA (female), 50 ohm impedance- 2900980 - Cellular antenna cable, 5 m in length, SMA (male) -> SMA (female), 50 ohm impedance
2868596 - Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 24 V DC/0.5 A
Why Proax for Phoenix Contact 2903805?
Proax is an authorized distributor of Phoenix Contact 2903805 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
TC MOBILE I/O X200 AC, The compact TC MOBILE I/O X200 AC signaling system is the successor to the PSI-MODEM-SMS-RELAY/6 DI/4DO/AC SMS relay (Order No. 2313513) and is used to monitor analog and digital values via the mobile communication network and switch relay outputs remotely. A USB connection to a computer and a web browser is all that is needed for configuration. The device features numerous helpful software functions, such as mobile communication diagnostics, sending of log books via e-mail, and different user roles.
TC MOBILE I/O X300, Compact signaling system for mobile phone networks to monitor analog and digital values as well as to switch relay outputs remotely. Communication is via the ODP protocol to an ODP server using GPRS. Supply voltage range of 10 V ... 60 V DC.
