Official Distributor
SKU
MPN
TC MGUARD RS2000 3G VPN
Weight
0.65 kg
Series TC-MGUARD-RS
TC MGUARD RS2000 3G VPN - Router
Security appliance with cellular interface. SD card slot. 2 VPN tunnels, 2-click firewall for easy configuration, router with NAT/1:1 NAT. 4-port switch. 2 SIM card slots. GPS receiver.
- High-speed cellular interface with provider redundancy
- Integrated 4-port switch
- Maximum security with IPsec protocol on Layer 3
- Web-based management, SNMP
- Replaceable configuration memory
- RS-232 interface with COM server function for integrating serial devices
- Flexible routing
- 2 parallel VPN tunnels
- Supports current certificates such as x509.v3
- Stateful inspection firewall
- Extended temperature rating
Technical Specifications
Dimensions
Width | 45 mm |
Height | 130 mm |
Depth | 114 mm |
Utilization restriction
CCCex note | Use in potentially explosive areas is not permitted in China. |
Material specifications
Material (Housing) | Metal |
Interfaces
Signal | Ethernet |
Web server | yes |
Basic Functions | Router with simplified 2-click firewall and VPN for 2 tunnels (fixed), metal housing, slot for any SD memory card |
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Transmission Speed | 10/100 Mbps (auto negotiation) |
Connection Method | RJ45 |
No. of channels | 4 |
Transmission length | 100 m (shielded twisted pair) |
Protocols Supported | TCP/IP, UDP/IP, FTP, HTTP |
Auxiliary protocols | ARP, DHCP, PING (ICMP), SNMP V1, SMTP |
Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Serial transmission speed | 9.6; 19.2; 38.4; 57.6; 115.2 kbps |
Connection Method | D-SUB 9 plug |
Transmission length | 15 m |
File format/coding | UART/NRZ: 8 Data, 1/2 Stop, None/Even/Odd Parity |
Data flow control/protocols | Software handshake, Xon/Xoff or hardware handshake RTS/CTS |
Wireless
Interface description | GSM / GPRS / EDGE / UMTS / CDMA2000 |
Frequency Range | 800 MHz (UMTS/HSPA B6) |
Frequency Range | 850 MHz (UMTS/HSPA B5) |
Frequency Range | 900 MHz (UMTS/HSPA B8) |
Frequency Range | 1900 MHz (UMTS/HSPA B2) |
Frequency Range | 2100 MHz (UMTS/HSPA B1) |
Frequency Range | 800 MHz (CDMA2000 EV-DO) |
Frequency Range | 1900 MHz (CDMA2000 EV-DO) |
Frequency Range | 850 MHz (2 W (EGSM)) |
Frequency Range | 900 MHz (2 W (EGSM)) |
Frequency Range | 1800 MHz (1 W (EGSM)) |
Frequency Range | 1900 MHz (1 W (EGSM)) |
Data rate | ≤ 14.4 Mbps (HSDPA) |
Data rate | ≤ 5.7 Mbps (HSUPA) |
Data rate | ≤ 3.1 Mbps (DL CDMA2000) |
Data rate | ≤ 1.8 Mbps (UL CDMA2000) |
Antenna | 50 Ω impedance SMA antenna socket |
SIM Interface | 1.8 volt, 3 volt |
SIM Interface | 1.8 volt, 3 volt |
GPRS | Class 12, Class B |
GPRS | CS1 ... CS4 |
EDGE | Multislot Class 12 |
UMTS | HSPA 3GPP R6 |
Network function | 4 time slots for receiving data, 4 time slots for transmitting data. The PIN is saved in the modem. After a voltage interruption, there is automatic redialing into the network. Integrated TCP/IP stack, firewall and VPN support, independent connection establishment. |
Network check | LED bar graph to display receive quality |
Protocols Supported | GPS (Global Positioning System), GLONASS |
Functionality
Basic Functions | Router with simplified 2-click firewall and VPN for 2 tunnels (fixed), metal housing, slot for any SD memory card |
System requirements
Supported browsers | HTTPS support required |
Digital
Description of the input | Digital input |
Number of Inputs | 3 |
Voltage input signal | 10 V DC ... 30 V DC |
Current Input Signal | 5 mA |
Signal
Output name | Digital output |
Number of Outputs | 3 |
Voltage output signal | 10 V DC ... 30 V DC (depending on the operating voltage) |
Current Output Signal | ≤ 125 mA (Short-circuit-proof) |
Product properties
MTTF | 634 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
MTTF | 295 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
MTTF | 125 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Insulation characteristics
Degree of pollution | 2 |
Security functions
1:1 Network Address Translation (NAT) in the VPN | Supported |
Number of VPN tunnels | 2 (Fixed, Ipsec (IETF standard)) |
Authentication | X.509v3 certificates with RSA or PSK |
Data integrity | MD5, SHA-1 |
Dynamic Host Configuration Protocol (DHCP) support | Server or Relay Agent |
Filtering | Incoming or outgoing traffic |
Firewall data throughput | max. 124 Mbps (Router mode, default firewall rules, bidirectional throughput) |
Firewall data throughput | max. 58 Mbps (Stealth mode, default firewall rules, bidirectional throughput) |
Firewall rules | Simplified 2-click stateful inspection firewall |
Basic Functions | Router with simplified 2-click firewall and VPN for 2 tunnels (fixed), metal housing, slot for any SD memory card |
Internet Protocol Security (IPsec) mode | ESP tunnel / ESP transport |
Link Layer Discovery Protocol (LLDP) | As per protocol 802.2 |
Network Time Protocol (NTP) client | Client |
Remote Syslog Logging | on externals server |
Routing | Standard routing, NAT, 1:1-NAT, port forwarding |
Encryption methods | DES, 3DES, AES-128, -192, -256 |
Virtual private network (VPN) throughput | max. 40 Mbps (Router mode, VPN bidirectional throughput) |
Virtual private network (VPN) throughput | max. 26 Mbps (Stealth mode, VPN bidirectional throughput) |
Electrical properties
Electrical isolation | VCC // PE |
Maximum power dissipation for nominal condition | 4.7 W |
Mains type | Cellular communication |
Test voltage data interface/data interface | 1 kV (50 Hz, 1 min.) |
Test voltage data interface/power supply | 1 kV (50 Hz, 1 min.) |
Supply
Supply Voltage Range | 11 V DC ... 36 V DC (via pluggable COMBICON screw terminal block) |
Typical current consumption | < 320 mA (24 V DC) |
Max. current consumption | < 1.8 A (at 11 V DC (incl. 3 x 125 mA for the outputs)) |
Function
Management | Web-based management, SNMP |
Supply
Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
Single conductor/terminal point, rigid | 0.2 mm² ... 2.5 mm² |
Single-wire/terminal point, flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 14 |
Stripping length | 7.00 mm |
Tightening torque | 0.56 Nm ... 0.79 Nm |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -40 °C ... 60 °C |
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Standards and Regulations
Free from substances that could impair the application of coating | in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 |
CE
Certificate | CE-compliant |
UL, USA/Canada
Identification | Class I, Div. 2, Groups A, B, C, D |
Certificate | E357918 |
UL, USA
Identification | Class I, Zone 2, AEx nA IIC T4 |
UL, Canada
Identification | Class I, Zone 2, Ex nA IIC T4 Gc X |
Corrosive gas test
Identification | ISA-S71.04-1985 G3 Harsh Group A |
EMC data
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Electrostatic discharge
Standards/regulations | EN 61000-4-2 |
Contact discharge | ± 6 kV (Test Level 3) |
Discharge in air | ± 8 kV (Test Level 3) |
Comments | Criterion B |
Electromagnetic HF field
Standards/regulations | EN 61000-4-3 |
Frequency Range | 80 MHz ... 3 GHz (Test Level 3) |
Field intensity | 10 V/m |
Comments | Criterion A |
Fast transients (burst)
Standards/regulations | EN 61000-4-4 |
Input | ± 2.2 kV (Test Level 3) |
Signal | ± 2.2 kV (Test Level 3) |
Comments | Criterion B |
Surge current load (surge)
Standards/regulations | EN 61000-4-5 |
Input | ± 0.5 kV (DC supply) |
Signal | ± 1 kV (Data line, asymmetrical) |
Comments | Criterion B |
Conducted interference
Standards/regulations | EN 61000-4-6 |
Frequency Range | 0.15 MHz ... 80 MHz |
Comments | Criterion A |
Voltage | 10 V |
Emitted interference
Standards/regulations | EN 61000-6-4 |
Radio interference voltage in acc. with EN 55011 | EN 55011 class A industrial area of application |
Emitted radio interference in acc. with EN 55011 | EN 55011 class A industrial area of application |
Criteria
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Accessories
Why Proax for Phoenix Contact 2903441?
Proax is an authorized distributor of Phoenix Contact 2903441 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended