Official DistributorSKU
MPN
FL TIMESERVER NTP
Weight
0.35 kg
FL TIMESERVER NTP - Wireless module
GNSS receiver and NTP (Network Time Protocol) for Ethernet networks, receives time, date, and location via GPS, GLONASS, or Galileo, web-based management, supply via PoE (af) or 24 V DC, integrated antenna, IP68 housing
- High availability thanks to a range of different satellite systems
- Automatic switching between GPS, Galileo, and GLONASS
- Robust IP68 housing with integrated antenna for easy installation outside the control cabinet
- Fast, inexpensive connection with just one Power over Ethernet cable
- Precise position determination via web-based management, SNMP, NMEA, or JSON streaming
- Extended temperature range of -40 °C … +70 °C
Technical Specifications
Product properties
| Operating mode | NTP server (NTPv4) stratum 1 |
| MTBF | 60 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
| MTBF | 168 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
| MTBF | 316 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
Electrical properties
| Maximum power dissipation for nominal condition | 2.5 W |
General
| Response time | ≤ 2 ms (NTP, dependent on Ethernet network and available network capacity) |
| Response time | 1 s (Polling rate of NMEA position data via TCP) |
| Switch-on time | ≤ 100 s (Time until sat fix (cold restart, incl. device start)) |
| Switch-on time | ~ 40 s (Device start) |
Real-time clock
| Accuracy realtime clock | <15 seconds/month in offline mode (no GNSS reception or Internet connection, no temperature fluctuations) |
| Accuracy realtime clock | <60 seconds/month in offline mode (no GNSS reception or Internet connection, with temperature fluctuations) |
Supply: Module electronics
| Connection technology | COMBICON |
| Connection Method | Push-in spring connection |
| Note on the connection method | Recommended conductor cross section: 0.75 mm² |
| Note on the connection method | Recommended ferrule: connection length 10 mm |
| Note on the connection method | Recommended crimping pliers: trapezoidal or square |
| Designation | 1966101 FMC 1,5/ 3-STF-3,5 |
| Number of Positions | 2 |
| Cross section range AWG | 24 ... 16 (Use copper wires rated 75° C (UL)) |
| Supply Voltage | 24 V DC (SELV) |
| Supply Voltage Range | 10 V DC ... 30 V DC (SELV) |
| Supply Voltage Range | Power over Ethernet (PoE IEEE 802.3af or higher) |
| Current consumption | ≤ 104 mA (24 V) |
| Current consumption | max. 175 mA (UL, 10 V) |
| Current consumption | max. 60 mA (PoE) |
| Power consumption | ≤ 2.5 W |
1966101 FMC 1,5/ 3-STF-3,5
| Connection Method | Push-in spring connection |
| Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible [AWG] | ... 16 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 0.75 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Stripping length | 10 mm |
Functions
| Configuration | Web-based management |
Ethernet (RJ45)
| Number of interfaces | 1 |
| Connection Method | RJ45 |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission Speed | 10/100 Mbps |
| Transmission physics | Copper |
| Transmission length | 100 m (per segment) |
| No. of channels | 1 (RJ45 port) |
| Protocols Supported | SNTP |
| Protocols Supported | NTP (v1, v2, v3, v4, without authentication) |
| Protocols Supported | NMEA 0183 (via TCP) |
| Protocols Supported | HTTP |
| Protocols Supported | HTTPS |
| Protocols Supported | SNMP |
| Protocols Supported | SSH |
| Protocols Supported | DHCP |
| Protocols Supported | VLAN |
| Protocols Supported | Telnet |
Wireless
| Designation | GNSS (GPS / Galileo / GLONASS) |
| Antenna Connection Method | (Internal) |
| Frequency | 1575.42 MHz (GPS, L1C/A) |
| Frequency | 1602 MHz +k * 562,5 kHz (GLONASS, L1OF) |
| Frequency | 1575.42 MHz (Galileo, E1-B/C) |
| Accuracy class | CEP50= 5 m (Outdoor assembly) |
Dimensions
| Width | 62.8 mm |
| Height | 36.5 mm |
| Depth | 113.2 mm |
| Note on dimensions | Outside dimensions |
Material specifications
| Color (Housing) | black (RAL 9005) |
| Material (Housing) | Polycarbonate |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 70 °C |
| Degree of Protection | IP68 (Manufacturers declaration, not evaluated by UL) |
| Degree of Protection | UL/CSA: Enclosure Type Rating 1 (indoor use) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
UKCA
| Certificate | UKCA-compliant |
UL, USA/Canada
| Identification | UL 61010 Listed |
Mounting
| Mounting Type | Outdoors in the open |
| Assembly instructions | Outside of control cabinets or other metal housings |
Accessories
2702544 - Accessories for FL-WLAN 1100 series: Optional cable feed-through for sealing (IP67) the FL-WLAN 110x connection (IP20), if the device is not directly integrated onto the closed housing. Not needed when mounting on a control cabinet, etc.
1421607 - RJ45 connector, design: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5, material: Metal, connection method: Insulation displacement connection, connection cross section: AWG 26- 24, cable outlet: straight, color: green, Ethernet
1966101 - PCB connector, nominal cross section: 1.5 mm2, color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, contact connection type: Socket, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: FMC 1,5/..-STF, pitch: 3.5 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 0 °, plug-in system: COMBICON MC 1,5, locking: Screw locking mechanism, mounting: Screw flange, type of packaging: packed in cardboard
1004065 - PoE injector, 30 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
Why Proax for Phoenix Contact 1107132?
Proax is an authorized distributor of Phoenix Contact 1107132 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |