Official Distributor
SKU
MPN
TC MGUARD RS4000 4G ATT VPN
Weight
0.648 kg
Series TC-MGUARD-RS
TC MGUARD RS4000 4G ATT VPN - Router
Security appliance, version for AT&T (US), WAN and 4G mobile network interface, SD card slot, 10 VPN tunnels, intelligent firewall with full scope of functions, router with NAT/1:1 NAT, optional CIFS Integrity Monitoring, 4 port Managed Switch
- Integrated 4-port switch
- Maximum security with IPsec protocol on Layer 3
- Web-based management, SNMP
- Replaceable configuration memory
- RS-232 interface with COM server function for integrating serial devices
- Flexible routing
- Up to 10 parallel VPN tunnels (up to 250 possible with additional license as an option)
- Supports current certificates such as x509.v3
- Stateful inspection firewall for dynamic filtering
- Extended temperature rating
Technical Specifications
Dimensions
Width | 45 mm |
Height | 130 mm |
Depth | 114 mm |
Utilization restriction
CCCex note | Use in potentially explosive areas is not permitted in China. |
Material specifications
Material (Housing) | Metal |
Interfaces
Signal | Ethernet |
Web server | yes |
Basic Functions | Router with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFS Integrity Monitoring (as an option), metal housing, slot for SD memory card |
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Transmission Speed | 10/100 Mbps (auto negotiation) |
Connection Method | RJ45 |
No. of channels | 6 |
Transmission length | 100 m (shielded twisted pair) |
Protocols Supported | TCP/IP, UDP/IP, FTP, HTTP |
Auxiliary protocols | ARP, DHCP, PING (ICMP), SNMP V1, SMTP |
Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Serial transmission speed | 9.6; 19.2; 38.4; 57.6; 115.2 kbps |
Connection Method | D-SUB 9 plug |
Transmission length | 15 m |
File format/coding | UART/NRZ: 8 Data, 1/2 Stop, None/Even/Odd Parity |
Data flow control/protocols | Software handshake, Xon/Xoff or hardware handshake RTS/CTS |
Wireless
Interface description | LTE (FDD) / UMTS |
Frequency Range | 700 MHz (LTE B13 / B17) |
Frequency Range | 850 MHz (LTE B5) |
Frequency Range | 1700 MHz (LTE B4) |
Frequency Range | 1900 MHz (LTE B2) |
Frequency Range | 850 MHz (UMTS/HSPA B5) |
Frequency Range | 1900 MHz (UMTS/HSPA B2) |
Data rate | ≤ 150 Mbps (LTE, DL) |
Data rate | ≤ 50 Mbps (LTE, UL) |
Antenna | 50 Ω impedance SMA antenna socket |
Antenna Connection Method | SMA (female) |
SIM Interface | 1.8 volt, 3 volt |
UMTS | HSPA 3GPP R9 |
LTE | CAT4 |
Country support | USA |
Functionality
Basic Functions | Router with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFS Integrity Monitoring (as an option), metal housing, slot for SD memory card |
System requirements
Supported browsers | HTTPS support required |
Digital
Description of the input | Digital input |
Number of Inputs | 3 |
Voltage input signal | 10 V DC ... 30 V DC |
Current Input Signal | 5 mA |
Signal
Output name | Digital output, resistive load |
Number of Outputs | 3 |
Voltage output signal | 10 V DC ... 30 V DC (depending on the operating voltage) |
Current Output Signal | ≤ 125 mA (Short-circuit-proof) |
Product properties
Application | Ethernet |
Application | RS-232 |
MTTF | 532 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
MTTF | 250 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
MTTF | 104 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Security functions
1:1 Network Address Translation (NAT) in the VPN | Supported |
Number of VPN tunnels | 10 (up to 250 tunnels with additional license as an option) |
Authentication | X.509v3 certificates with RSA or PSK |
Data integrity | MD5, SHA-1 |
Dynamic Host Configuration Protocol (DHCP) support | Server or Relay Agent |
Filtering | MAC addresses |
Filtering | IP addresses |
Filtering | Ports |
Filtering | Protocols |
Firewall data throughput | max. 124 Mbps (Router mode, default firewall rules, bidirectional throughput) |
Firewall data throughput | max. 58 Mbps (Stealth mode, default firewall rules, bidirectional throughput) |
Firewall rules | Configurable stateful inspection firewall with full scope of functions |
Basic Functions | Router with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFS Integrity Monitoring (as an option), metal housing, slot for SD memory card |
Internet Protocol Security (IPsec) mode | ESP tunnel / ESP transport |
Link Layer Discovery Protocol (LLDP) | As per protocol 802.2 |
Network Time Protocol (NTP) client | Client |
Remote Syslog Logging | on externals server |
Routing | Standard routing |
Routing | NAT |
Routing | 1:1-NAT |
Routing | Port forwarding |
Protection against | IP spoofing, DoS and Syn Flood Protection |
Encryption methods | DES, 3DES, AES-128, -192, -256 |
Virtual private network (VPN) throughput | max. 40 Mbps (Router) |
Virtual private network (VPN) throughput | max. 26 Mbps (Stealth mode, VPN bidirectional throughput) |
Electrical properties
Electrical isolation | VCC // PE |
Mains type | Cellular communication |
Test voltage data interface/data interface | 1 kV (50 Hz, 1 min., manufacturer's declaration) |
Test voltage data interface/power supply | 1 kV (50 Hz, 1 min., manufacturer's declaration) |
Supply
Supply Voltage Range | 11 V DC ... 36 V DC (via pluggable COMBICON screw terminal block) |
Typical current consumption | < 320 mA (24 V DC) |
Max. current consumption | 1.8 A (at 11 V DC (incl. 3 x 125 mA for the outputs)) |
Function
Management | Web-based management, SNMP |
Supply
Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
Conductor cross section, flexible | 0.20 mm² ... 2.50 mm² |
Conductor cross section, rigid | 0.20 mm² ... 2.50 mm² |
Conductor cross section AWG | 24 ... 14 |
Stripping length | 7.00 mm |
Tightening torque | 0.56 Nm ... 0.79 Nm |
Ambient conditions
Degree of Protection | IP20 (Manufacturer's declaration) |
Ambient Temperature (Operation) | -40 °C ... 60 °C |
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Standards and Regulations
Free from substances that could impair the application of coating | in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 |
UL, USA/Canada
Identification | Class I, Zone 2, AEx nA IIC T4 / Ex nA IIC T4 Gc |
Identification | Class I, Div. 2, Groups A, B, C, D T4 |
Corrosive gas test
Identification | ISA-S71.04-1985 G3 Harsh Group A |
Wireless approval USA, FCC
Certificate | N7NHL7588 |
Mounting
Mounting Type | DIN rail mounting |
EMC data
Electromagnetic compatibility | Conformance with RED Directive 2014/53/EU |
Electrostatic discharge
Standards/regulations | EN 61000-4-2 |
Contact discharge | ± 6 kV (Test Level 3) |
Discharge in air | ± 8 kV (Test Level 3) |
Comments | Criterion B |
Electromagnetic HF field
Standards/regulations | EN 61000-4-3 |
Frequency Range | 80 MHz ... 3 GHz (Test Level 3) |
Field intensity | 10 V/m |
Comments | Criterion A |
Fast transients (burst)
Standards/regulations | EN 61000-4-4 |
Input | ± 2.2 kV (Test Level 3) |
Signal | ± 2.2 kV (Test Level 3) |
Comments | Criterion B |
Surge current load (surge)
Standards/regulations | EN 61000-4-5 |
Input | ± 0.5 kV (DC supply) |
Signal | ± 1 kV (Data line, asymmetrical) |
Comments | Criterion B |
Conducted interference
Standards/regulations | EN 61000-4-6 |
Frequency Range | 0.15 MHz ... 80 MHz |
Comments | Criterion A |
Voltage | 10 V |
Emitted interference
Standards/regulations | EN 61000-6-4 |
Radio interference voltage in acc. with EN 55011 | EN 55011 class A industrial area of application |
Emitted radio interference in acc. with EN 55011 | EN 55011 class A industrial area of application |
Criteria
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Accessories
Why Proax for Phoenix Contact 1010463?
Proax is an authorized distributor of Phoenix Contact 1010463 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended