Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2903338
AllRelaysElectromechanical RelaysIndustrial Relays
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
RIF-1-RPT-LDP-24DC/1X21AU
Weight
0.068 kg
This product has been discontinued and replaced with 2903330
Series RIF

RIF-1-RPT-LDP-24DC/1X21AU - Relay Module

Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 24 V DC

Technical Specifications

Notes

Notes on operationFBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)

Product properties

Product familyRIFLINE complete
ApplicationUniversal
Operating mode100% operating factor
Mechanical service lifeapprox. 3x 107 cycles

Insulation characteristics

InsulationSafe isolation between input and output
InsulationBasic insulation between the changeover contacts
InsulationSafe isolation between input and output
InsulationBasic insulation between the changeover contacts
Overvoltage categoryIII
Pollution degree2

Electrical properties

Service life electricalsee diagram
Maximum power dissipation for nominal condition0.43 W
Test voltage (Winding/contact)4 kVrms (50 Hz, 1 min., winding/contact)
Rated Insulation Voltage250 V AC
Rated surge voltage6 kV (Input/output)
Rated surge voltage4 kV (between the changeover contacts)

Coil side

Nominal input voltage UN24 V DC
Input voltage range19.2 V DC ... 33.6 V DC (20 °C)
Input voltage range in reference to UNsee diagram
Drive and functionmonostable
Typical input current at UN18 mA
Typical response time8 ms
Typical release time10 ms
Coil Voltage24 V DC
Protective circuitFreewheeling diode
Operating voltage displayYellow LED

Switching

Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact MaterialAgNi, hard gold-plated
Maximum Switching Voltage30 V AC
Maximum Switching Voltage36 V DC
Minimum Switching Voltage100 mV (10 mA)
Limiting Continuous Current50 mA
Maximum Inrush Current50 mA
Min. switching current1 mA (24 V)
Interrupting rating (ohmic load) max.1.2 W (24 V DC)
Utilization category CB Scheme (IEC 60947-5-1)AC15, 1.5 A/240 V (N/O contact)
Utilization category CB Scheme (IEC 60947-5-1)AC15, 3 A/250 V (N/C contact)
Utilization category CB Scheme (IEC 60947-5-1)DC13, 2 A/24 V (N/C contact)
Utilization category CB Scheme (IEC 60947-5-1)DC13, 0.2 A/250 V (N/O contact)

Switching: when the gold layer is destroyed

Notethe following values are applicable if a gold layer is destroyed
Contact MaterialAgNi
Maximum Switching Voltage250 V AC/DC
Minimum Switching Voltage12 V (at 10 mA)
Limiting Continuous Current50 A (20 ms, N/O contacts)
Min. switching current10 mA (at 12 V)
Interrupting rating (ohmic load) max.264 W (at 24 V DC)
Interrupting rating (ohmic load) max.58 W (at 48 V DC)
Interrupting rating (ohmic load) max.48 W (at 60 V DC)
Interrupting rating (ohmic load) max.50 W (at 110 V DC)
Interrupting rating (ohmic load) max.80 W (at 220 V DC)
Interrupting rating (ohmic load) max.2750 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
Switching capacity0.2 A (at 110 V, DC13)
Switching capacity0.2 A (at 250 V, DC13)
Switching capacity2 A (at 24 V, AC15)
Switching capacity2 A (at 120 V, AC15)
Switching capacity2 A (at 250 V, AC15)

Connection data

Connection MethodPush-in connection
Stripping length8 mm
Conductor cross section rigid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG26 ... 16 (solid)
Conductor cross section AWG26 ... 16 (flexible)

Drill hole

Diameter3.2 mm
Width16 mm
Height93 mm
Depth75 mm

Material specifications

Colorgray (RAL 7042)
Flammability rating according to UL 94V2 (Housing)

Ambient conditions

Degree of protection (Relay base)IP20 (Relay base)
Degree of protection (Relay)RT II (Relay)
Ambient Temperature (Operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Corrosive gas test

IdentificationISA-S71.04. G3 Harsh Group
IdentificationEN 60068-2-60

Standards and Regulations

Standards/regulationsDIN EN 50178

Mounting

Mounting TypeDIN rail mounting
Assembly instructionsin rows with zero spacing
Mounting Positionany
Accessories
  • Phoenix Contact3030336
    3030336
    3030336 - Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red
  • Phoenix Contact3036932
    3036932
    3036932 - Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: blue
  • Phoenix Contact3032237
    3032237
    3032237 - Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: gray
  • Phoenix Contact3030284
    3030284
    3030284 - Plug-in bridge, pitch: 8.2 mm, number of positions: 2, color: red
  • Phoenix Contact3032567
    3032567
    3032567 - Plug-in bridge, pitch: 8.2 mm, number of positions: 2, color: blue
  • Phoenix Contact3032541
    3032541
    3032541 - Bridge for potential distribution
  • Phoenix Contact0800967
    0800967
    0800967 -
  • Phoenix Contact0819217
    0819217
    0819217 -
  • Phoenix Contact0819262
    0819262
    0819262 -
  • Phoenix Contact0801733
    0801733
    0801733 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
  • Phoenix Contact0801681
    0801681
    0801681 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
  • Phoenix Contact1204119
    1204119
    1204119 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
  • Phoenix Contact1204122
    1204122
    1204122 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
  • Phoenix Contact0801704
    0801704
    0801704 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
  • Phoenix Contact1206421
    1206421
    1206421 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver
  • Phoenix Contact1206434
    1206434
    1206434 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver
  • Phoenix Contact0801762
    0801762
    0801762 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
  • Phoenix Contact1206560
    1206560
    1206560 - DIN rail end piece, for DIN rail NS 35/7.5
  • Phoenix Contact1201730
    1201730
    1201730 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
  • Phoenix Contact1201714
    1201714
    1201714 - DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
  • Phoenix Contact0806602
    0806602
    0806602 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: white
  • Phoenix Contact1204135
    1204135
    1204135 - DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
  • Phoenix Contact1201756
    1201756
    1201756 - DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
  • Phoenix Contact1206599
    1206599
    1206599 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
  • Phoenix Contact1206586
    1206586
    1206586 - DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
  • Phoenix Contact1201895
    1201895
    1201895 - DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
  • Phoenix Contact1206573
    1206573
    1206573 - DIN rail end piece, for DIN rail NS 35/15
  • Phoenix Contact1201798
    1201798
    1201798 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile 2.3 mm, color: silver
  • Phoenix Contact3022218
    3022218
    3022218 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
  • Phoenix Contact3022276
    3022276
    3022276 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
  • Phoenix Contact0800886
    0800886
    0800886 - End clamp, width: 9.5 mm, color: gray
  • Phoenix Contact0201744
    0201744
    0201744 - Test plug, with solder connection up to 1 mm2 conductor cross section, number of positions: 1, color: gray
  • Phoenix Contact0201663
    0201663
    0201663 - Insulating sleeve, color: white
  • Phoenix Contact0201676
    0201676
    0201676 - Insulating sleeve, color: red
  • Phoenix Contact0201689
    0201689
    0201689 - Insulating sleeve, color: blue
  • Phoenix Contact0201692
    0201692
    0201692 - Insulating sleeve, color: yellow
  • Phoenix Contact0201702
    0201702
    0201702 - Insulating sleeve, color: green
  • Phoenix Contact0201728
    0201728
    0201728 - Insulating sleeve, color: gray
  • Phoenix Contact0201731
    0201731
    0201731 - Insulating sleeve, color: black
  • Phoenix Contact1050004
    1050004
    1050004 -
  • Phoenix Contact1050017
    1050017
    1050017 -
  • Phoenix Contact1050020
    1050020
    1050020 -
  • Phoenix Contact1050033
    1050033
    1050033 -
  • Phoenix Contact1050415
    1050415
    1050415 -
  • Phoenix Contact0818108
    0818108
    0818108 -
  • Phoenix Contact0824581
    0824581
    Marker for terminal blocks - UC-TM 5 CUS
  • Phoenix Contact0828734
    0828734
    0828734 -
  • Phoenix Contact0811972
    0811972
    0811972 -
  • Phoenix Contact0824945
    0824945
    Zack marker strip - ZB 15 CUS
  • Phoenix Contact0811998
    0811998
    0811998 -

Why Proax for Phoenix Contact 2903338?

Proax is an authorized distributor of Phoenix Contact 2903338 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size10
Recommended
  • Phoenix Contact2909884
    2909884
    2909884 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, retaining bracket. Contact switching type: 1 N/O contact, max. inrush current up to 130 A peak, 80 A (20 ms), 24 V DC input voltage
  • Phoenix Contact1078686
    1078686
    1078686 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, retaining bracket. Contact switching type: 1 N/O contact, max. inrush current up to 800 A, 24 V DC input voltage
  • Phoenix Contact2903342
    2903342
    2903342 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 24 V DC
  • Phoenix Contact2905289
    2905289
    2905289 - Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, and power contact relay with test button, integrated status LED, and freewheeling diode. Contact switching type: 1 changeover contact. Input voltage: 24 V DC
  • Phoenix Contact2903334
    2903334
    2903334 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 24 V DC
  • Phoenix Contact2908215
    2908215
    2908215 - Preassembled relay module with Push-in connection, consisting of: relay base, safety relay with force-guided contacts in accordance with DIN EN 61810-3, plug-in display/interference suppression module, and retaining bracket, contact switching type: 2 changeover contacts, input voltage: 24 V DC
  • Phoenix Contact2903330
    2903330
    2903330 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 24 V DC
  • Phoenix Contact2905291
    2905291
    2905291 - Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, and power contact relay with test button, integrated status LED, and freewheeling diode. Contact switching type: 2 changeover contacts. Input voltage: 24 V DC
  • Phoenix Contact1078802
    1078802
    1078802 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, retaining bracket. Contact switching type: 1 N/O contact, max. inrush current up to 130 A peak, 80 A (20 ms), 12 V DC input voltage
  • Phoenix Contact2906224
    2906224
    2906224 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 12 V DC
  • Phoenix Contact2906223
    2906223
    2906223 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 12 V DC
  • Phoenix Contact1021593
    1021593
    1021593 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, and metal retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 230 V AC
  • Phoenix Contact2903340
    2903340
    2903340 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 120 V AC
  • Phoenix Contact2903336
    2903336
    2903336 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 120 V AC
  • Phoenix Contact2909776
    2909776
    2909776 - Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact switching type: 1 changeover contact. Input voltage: 120 V AC
  • Phoenix Contact2903332
    2903332
    2903332 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 120 V AC
  • Phoenix Contact2903328
    2903328
    2903328 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 2 changeover contacts. Input voltage: 120 V AC
  • Phoenix Contact2909775
    2909775
    2909775 - Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact switching type: 2 changeover contacts. Input voltage: 120 V AC
  • Phoenix Contact2903339
    2903339
    2903339 - Preassembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 230 V AC
  • Phoenix Contact2903335
    2903335
    2903335 - Preassembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact switching type: 1 changeover contact. Input voltage: 230 V AC
Sold in quantities of 10

Available for order

Phoenix Contact Availability