2316390
Official DistributorSKU
PHX2316390
MPN
AXL P BK PN AF
Weight
0.321 kg
AXL P BK PN AF - Bus coupler
Axioline P bus coupler for PROFINET. Connects to PROFIBUS PA power supplies and Axioline P I/O modules along the Axioline P local bus (includes power supply connector and bus base module).
Technical Specifications
Dimensions
| Width | 45 mm |
| Height | 126.93 mm |
| Depth | 75 mm |
| Note on dimensions | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
Material specifications
| Color | gray |
Axioline P local bus
| Connection Method | Connection for bus base module |
| Transmission Speed | 100 Mbps |
PROFINET
| No. of channels | 2 |
| Connection Method | RJ45 socket, auto negotiation and auto crossing |
| Transmission Speed | 100 Mbps (Full duplex) |
| Transmission physics | Ethernet in RJ45 twisted pair |
Fieldbus: Local bus gateway
| Max. number of local bus devices | 63 (Redundant PROFIBUS PA segments and AXL P I/O modules. Consider the logic current consumed by the devices.) |
System limits
| Number of supported devices | max. 8 (per redundant PROFIBUS PA segments) |
| Number of supported devices | max. 63 (per station) |
PROFINET
| Device function | PROFINET device |
Product properties
| Product family | Axioline P |
| Type | block modular |
| Mounting Position | any |
| Scope of delivery | including bus base module and connectors |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Maximum power dissipation for nominal condition | 5 W |
Potentials
| Protective circuit | Surge protection of the supply voltage; electronic |
| Protective circuit | Polarity reversal protection of the supply voltage; electronic |
Potentials: Supply of the bus coupler
| Supply Voltage | 24 V DC (UL) |
| Supply Voltage Range | 19.2 V DC ... 30 V DC |
| Current draw | 4.15 A (19.2 V DC) |
| Current draw | 125 mA (24 V DC) |
Potentials: Supply of the Axioline P local bus UBus
| Supply Voltage | 5 V DC (via bus base module) |
| Power Supply Unit | 2 A |
| Current draw | 3 A (via bus base module) |
Potentials: Axioline P extension module supply voltage
| Supply Voltage | UL (via bus base module) |
| Current draw | 3 A (via bus base module) |
Connection technology
| Connection name | Power supply |
Conductor connection
| Connection Method | Push-in connection |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
| Stripping length | 8 mm |
Power supply
| Connection Method | Push-in connection |
| Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
| Stripping length | 8 mm |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 70 °C (Mounting position: wall mounting on horizontal DIN rail) |
| Degree of Protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 2000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 2000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Standards and Regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
ATEX
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | IBExU 18ATEXB018 X |
IECEx
| Identification | Ex ec IIC T4 Gc |
| Certificate | IECEx IBE 18.0023X |
UKCA Ex (UKEX)
| Identification | II 3G Ex ec IIC T4 Gc X |
| Certificate | PxCAI22UKEx2316390X |
Ex data
| UL, USA / Canada | Class I, Div. 2, Groups A, B, C, D T4Class I, Zone 2, IIC T4 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Accessories
AXL P FBPS BASE - Axioline P base for PROFIBUS PA power supply plugs. Provides Fieldbus power supply redundancy when two plugs are installed.
Why Proax for Phoenix Contact 2316390?
Proax is an authorized distributor of Phoenix Contact 2316390 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Axioline P, Bus coupler, PROFINET, RJ45 jack, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and connectors
AXL P AI8 P HART 1F - Axioline P, Analog input module, Passive analog inputs: 8 (HART), 0 mA ... 20 mA, 4 mA ... 20 mA, connection technology: 2-conductor, HART functionality, degree of protection: IP20
AXL P AI8 HART 1F - Axioline P, Analog input module, Active analog inputs: 8 (HART), 4 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, HART functionality, degree of protection: IP20
AXL P AO4 HART 1F - Axioline P, Analog output module, Analog outputs: 4 (HART), 0 mA ... 20 mA, 4 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, HART functionality, degree of protection: IP20, including bus base module and connectors
AXL P DI16/2 1F - Axioline P, Digital input module, Digital inputs: 16, 24 V DC, connection technology: 2-conductor, degree of protection: IP20
AXL P EX IS AI8 HART 1F - Axioline P, Analog input module, Active analog inputs: 8 (HART), 4 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, HART functionality, Intrinsically safe, degree of protection: IP20- AXL P FBPS BASE - Axioline P base for PROFIBUS PA power supply plugs. Provides Fieldbus power supply redundancy when two plugs are installed.
