2306715
Official DistributorSKU
PHX2306715
MPN
UM122-REL/MR-G220/B08/SO148
Weight
0.622 kg
UM122-REL/MR-G220/B08/SO148 - Relay Module
VARIOFACE module, customer-specific wiring, miniature switching relay for 110 V DC with light indicator
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Mechanical service life | approx. 3x 10⁷ cycles |
Insulation characteristics
| Insulation | Basic insulation |
Insulation characteristics: Air clearances and creepage distances, input/output
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
Insulation characteristics: Air and creepage distances, output/output
| Insulation | Functional insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
Air clearances and creepage distances, input/output
| Rated Insulation Voltage | 230 V |
| Rated surge voltage | 4 kV (1.2/50 μs) |
Air and creepage distances, output/output
| Rated Insulation Voltage | 260 V |
| Rated surge voltage | 2.3 kV (1.2/50 μs) |
Coil side
| Nominal input voltage UN | 220 V DC |
| Input voltage range | 187 V DC ... 242 V DC (20 °C) |
| Typical input current at UN | 4 mA |
| Typical response time | 9 ms |
| Typical release time | 10 ms (< 300 ms (with capacitor)) |
| Protective circuit | Freewheeling, polarity protection, resistance, capacitor; Freewheeling diode, polarity protection diode, resistance, capacitor |
Switching
| Contact Material | AgNi |
| Maximum Switching Voltage | 250 V AC/DC |
| Limiting Continuous Current | 6 A |
| Maximum Inrush Current | 8 A |
| Interrupting rating (ohmic load) max. | 190 W (at 24 V DC) |
| Interrupting rating (ohmic load) max. | 100 W (at 48 V DC) |
| Interrupting rating (ohmic load) max. | 60 W (at 60 V DC) |
| Interrupting rating (ohmic load) max. | 44 W (at 110 V DC) |
| Interrupting rating (ohmic load) max. | 60 W (at 220 V DC) |
| Interrupting rating (ohmic load) max. | 2000 VA (for 250 V AC) |
Input
| Connection Method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Output
| Connection Method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2.4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Dimensions
| Width | 141 mm |
| Height | 128 mm |
| Depth | 51 mm |
Ambient conditions
| Degree of Protection | IP00 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Altitude | ≤ 2000 m |
Air clearances and creepage distances, input/output
| Standards/regulations | DIN EN 50178: 1998-04 |
Air and creepage distances, output/output
| Standards/regulations | DIN EN 50178: 1998-04 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2306715?
Proax is an authorized distributor of Phoenix Contact 2306715 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Lateral element, to attach profile cover UM 122 to DIN rail NS 35/7.5, with M3 screw fixture, tightening torque 0.25 Nm
UM122-SEMFE-A92 BK - Lateral element, to attach profile cover UM 122 to DIN rail NS 35/7.5, with M3 screw fixture, tightening torque 0.25 Nm- UM122-SEFE/R KMGY - Side element, right, with foot, width: 5 mm wide, length: 122 mm, for mounting on DIN rail NS 32 or NS 35/7.5
UM122-SEFE/R - Side element, right, with foot, width: 5 mm wide, length: 122 mm, for mounting on DIN rail NS 32 or NS 35/7.5
Side element, left, with foot, width: 5 mm, length: 122 mm, for mounting on DIN rail NS 32 or NS 35/7.5
UM122-SEFE/L - Side element, left, with foot, width: 5 mm, length: 122 mm, for mounting on DIN rail NS 32 or NS 35/7.5
UM122-PROFIL GN L240.5 - Press-drawn section housings, Basic profile, profile width (internal): 122 mm, profile width (external): 127.5 mm, length: 240.5 mm- UM122-PROFIL 235CM - Profile PC board base, with a constructional width of 122 mm and a fixed length of 235 cm
- UM122-PROFIL 100CM - Press-drawn section housings, Basic profile, profile width (internal): 122 mm, profile width (external): 127.5 mm, length: 1000 mm, Note: required profile length = PCB length - 9.5 mm
UM122-FLK16/EX-MB/8 - Ex-module carrier, intrinsically safe, for accommodating 8 Process Interface modules (PI-Ex...).
UM122-FE KMGY - Press-drawn section housings, Base element for the DIN rail, for mounting below UM-PRO PROFILE (width: 122 mm), Foot element
UM122-A/U92 - Press-drawn section housings, Latching, Cover, 92 mm wide, width: 92 mm, Note: length of the cover = length of the PCB - 1.8 mm
