Official DistributorSKU
MPN
IB IL 24/48 DOR 2/W-PAC
Weight
0.082 kg
This product is Not Cancellable/Not Returnable
Series IB-IL
IB IL 24/48 DOR 2/W-PAC - Relay Module
Inline, Relay terminal, Relay outputs: 2 (floating), Changeover contact, 24 V AC, 48 V DC, for switching ohmic loads, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
- 2 relays
- Floating connections for 2 actuators
Technical Specifications
Dimensions
| Width | 12.2 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
| Note on dimensions | Housing dimensions |
Inline local bus
| Number of interfaces | 2 |
| Connection Method | Inline data jumper |
| Transmission Speed | 500 kbps |
Module
| ID code (dec.) | 189 |
| ID code (hex) | BD |
| Length code (hex) | C2 |
| Length code (dec) | 194 |
| Process data channel | 2 bit |
| Input address area | 0 bit |
| Output address area | 2 bit |
| Register length | 2 bit |
| Required parameter data | 3 Byte |
| Required configuration data | 4 Byte |
Relay
| Number of Outputs | 2 (floating) |
| Connection Method | Spring-cage connection |
| Contact switching type | Changeover contact |
| Switching voltage | min. 10 mV (DC) |
| Switching voltage | max. 30 V AC (PELV (EN 61131)) |
| Switching voltage | max. 60 V DC (PELV (EN 61131)) |
| Switching current | min. 10 µA |
| Switching current | max. 2 A (30 V DC) |
| Switching current | max. 1 A (60 V DC) |
| Switching capacity | 60 W |
| Switching capacity | 62 VA (ohmic) |
| Limiting Continuous Current | 2 A (at maximum ambient temperature) |
| Mechanical service life | 2x 10⁵ cycles |
Product properties
| Product family | Inline |
| Type | modular |
| Scope of delivery | including Inline connector and labeling field |
| No. of channels | 2 |
| Operating mode | Process data mode with 2 bits |
| Special Properties | for switching ohmic loads |
Insulation characteristics
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
Potentials: Communications power (UL)
| Supply Voltage | 7.5 V DC (via voltage jumper) |
| Current draw | max. 30 mA |
| Power consumption | max. 0.23 W |
Potentials: Segment circuit supply (US)
| Supply Voltage | 24 V DC (via voltage jumper) |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 4 A |
Electrical isolation/isolation of the voltage ranges
| Test voltage: Relay contact / Bus logics | 1.5 kV, 50 Hz, 1 min. |
| Test voltage: Contact/contact | 1 kV, 50 Hz, 1 min. |
| Test voltage: Contact/functional ground | 1 kV, 50 Hz, 1 min. |
Connection technology
| Connection name | Inline connector |
Conductor connection
| Connection Method | Spring-cage connection |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Inline connector
| Connection Method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Ambient conditions
| Ambient Temperature (Operation) | -25 °C ... 55 °C |
| Degree of Protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
Standards and Regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
Why Proax for Phoenix Contact 2863119?
Proax is an authorized distributor of Phoenix Contact 2863119 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
IB IL 24/48 DOR 2/W-XC-PAC - Inline, Relay terminal, Relay output: 2 (floating contacts), 2 floating changeover contacts, 24 V AC / 48 V DC, for switching ohmic loads, Extreme conditions version, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field- IB IL 24/48 DOR 2/W - Inline digital output terminal block, without accessories, 2 relay changeover contacts, gold contact, 5 - 48 V DC, 2 A
IB IL 24/230 DOR1/W-2MBD-PAC - Inline, Relay terminal, Relay output: 1 (floating contacts), 24 V DC, 230 V AC, for switching ohmic loads, transmission speed in the local bus: 2 Mbps, degree of protection: IP20, including Inline connector and labeling field- IB IL 24/230 DOR1/W-PAC - Inline, Relay terminal, Relay output: 1 (floating), Changeover contact, 24 V AC, 230 V AC, for switching ohmic loads, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
IB IL 24/230 DOR1/W-PC - Inline digital output terminal block, without accessories, 1 relay changeover contact, 5 - 253 V AC, 3A- IB IL 24/230 DOR1/W-PC-PAC - Inline, Relay terminal, Relay output: 1 (floating contacts), 24 V DC, 230 V AC, for switching inductive and capacitive loads, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
IB IL 24/230 DOR1/W - Inline digital output terminal block, without accessories, 1 relay changeover contact, gold contact, 5 - 253 V AC, 3A
IB IL 24/230 DOR4/W-2MBD - Inline digital output terminal block, without accessories, 4 relay changeover contacts, gold contacts, transmission speed 2 Mbaud, 5 - 253 V AC, 3 A
IB IL 24/230 DOR4/W-2MBD-PAC - Inline digital output terminal block, complete with accessories (connector and marking field), 4 relay changeover contacts, gold contacts, transmission speed 2 Mbaud, 5 - 253 V AC, 3 A- IB IL 24/230 DOR4/W-PAC - Inline, Relay terminal, Relay outputs: 4 (floating), Changeover contact, 24 V DC, 230 V AC, for switching ohmic loads, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields
IB IL 24/230 DOR4/W-PC - Inline digital output terminal block, without accessories, 4 relay changeover contacts, 5 - 253 V AC, 3 A
IB IL 24/230 DOR4/W-PC-PAC - Inline, Relay terminal, Relay outputs: 4 (floating), Changeover contact, 24 V DC, 230 V AC, for switching inductive and capacitive loads, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields- IB IL 24/230 DOR4/W - Inline digital output terminal block, without accessories, 4 relay changeover contacts, gold contacts, 5 - 253 V AC, 3 A
IB IL 24/230 DOR4/HC-PAC - Inline, Relay terminal, Relay outputs: 4 (floating), N/O contact, 24 V DC, 230 V AC, high inrush current, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields- IB IL 24/230 DOR 1/W-2MBD - Inline digital output terminal block, without accessories, 1 relay changeover contact, gold contact, transmission speed 2 Mbaud, 5 - 253 V AC, 3 A
IB IL 230 DI 1 - Inline digital input terminal, without accessories, 1 input, 230 V AC, 3-conductor connection technology
IB IL 230 DI 1-PAC - Inline, Digital input terminal, Digital inputs: 1, 230 V AC, connection technology: 3-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
IB IL 230 PWR IN/F-D-PAC - Inline power terminal, complete with accessories (connector and labeling field), 230 V AC, with fuse and diagnostics- IB IL 230 PWR IN-PAC - Inline power terminal block, complete with accessories (connector and labeling field), without fuse, 230 V AC
