Official DistributorSKU
MPN
MCR-SL-S-400-I-LP
Weight
0.143 kg
This product is Not Cancellable/Not Returnable
Series MCR-SL-S
MCR-SL-S-400-I-LP - Current transducers
MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...400 A, loop-powered output with 4...20 mA
- Can be retrofitted with open-up Rogowski coil
- Loop-powered
- 30 ... 6000 Hz true r.m.s. value measurement
- Measuring range selection via slide switch
Technical Specifications
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Maximum power dissipation for nominal condition | 1 W |
| Test voltage input/output | 4.13 kV AC (50 Hz, 60 s) |
| Step response (10-90%) | < 340 ms |
| Maximum temperature coefficient | < 0.025 %/K |
| Maximum transmission error | < 1 % (of final value) |
| Rated Insulation Voltage | 300 V AC (to earth) |
Supply
| Supply Voltage Range | loop-powered, no external supply necessary |
Signal
| Configurable/programmable | Yes |
| Current Input Signal | 0 A ... 400 A |
Measurement
| Input current range | 0 A AC ... 200 A AC |
| Input current range | 0 A AC ... 300 A AC |
| Input current range | 0 A AC ... 400 A AC |
| Setting range for min. input current | 0 A AC ... 200 A AC |
| Setting range for max. input current | 0 A AC ... 400 A AC |
| Overload capacity | Depending on laid conductor |
| Surge strength | Depending on through connected conductor |
| Frequency measuring range | 30 Hz ... 6000 Hz |
| Curve type | Sinusoidal and non-sinusoidal |
| Operate threshold | 1 % (of final value) |
Signal: Current
| Current Output Signal | 4 mA ... 20 mA |
| Max. current output signal | < 25 mA |
| Load/Output Load Current Output | (UB - 12 V) x 350 / 12 A |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm ... 0.6 Nm (4,4 ... 5,31 lbf-in.) |
| Connection Method | Through connection |
Item dimensions
| Width | 55 mm |
| Height | 85 mm |
| Depth | 70.5 mm |
Circular conductor
| Diameter | ≤ 18.5 mm |
Material specifications
| Color | green (RAL 6021) |
| Housing Material | Polyamide PA non-reinforced |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
CE
| Certificate | CE-compliant |
UKCA
| Certificate | UKCA-compliant |
UL, USA/Canada
| Identification | UL/C-UL Listed UL 508 |
| Identification | Class I, Div. 2, Groups A, B, C, D T4A |
| Identification | Class I, Zone 2, Group IIC T4A |
| Identification | Or Non-Hazardous Locations only |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2813509?
Proax is an authorized distributor of Phoenix Contact 2813509 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
MCR-SL-S-400-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...400 A, output voltage 0...(5) 10 V
MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...200 A, loop-powered output with 4...20 mA
MCR-SL-S-200-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...200 A, output voltage 0...(5) 10 V
MCR-SL-S-100-I-LP - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...100 A, loop-powered output with 4...20 mA
MCR-SL-S-100-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...100 A, output voltage 0...(5) 10 V
MCR-SL-S- 16-SP- 24 - MCR current protector, for sinusoidal alternating currents 0 … 16 A AC/ 1 changeover contact
MCR temperature transducer for Pt 100, 2, 3, or 4-wire system, input -100 °C...600 °C, output signal 0(4) mA ... 20 mA
MCR-SL-PT100-LP-I, MCR temperature transducers: programmable loop-powered temperature transducers for Pt 100 resistance thermometers
MCR-SL-D-FIT - MCR digital display, for measuring and displaying frequencies, pulses and times, 6-fig. display
MCR-SL-D-U-I - MCR digital display, for measurement and display of standard signals, 5-fig. display
MCR-SL-D-PT100 - MCR digital display, for measuring temperatures, PT resistance thermometer / 5-fig. display- MCR-SL-D-TE-JK - MCR digital display, for measuring temperatures, thermocouples / 5-fig. display
Digital setpoint encoders with manual and automatic ramp for defining current and voltage signals, 4-pos. display
MCR-SL-HT-PT 100-I - Measurement and control temperature transducer, for resistance thermometers, thermocouples, resistance-type sensors, and voltage sensors. For Pt 100 resistance temperature detectors.
MCR-SL-CUC-100-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 100 A input current, 4 ... 20 mA output
MCR-SL-CUC-100-U - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 100 A input current, 0 ... 10 V output
MCR-SL-CUC-200-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 200 A input current, 4 ... 20 mA output
