2864464
Official DistributorSKU
PHX2864464
MPN
MCR-SL-S- 16-SP- 24
Weight
0.16 kg
Series MCR-SL-S
MCR-SL-S- 16-SP- 24 - Current monitoring
MCR current protector, for sinusoidal alternating currents 0 … 16 A AC/ 1 changeover contact
- Adjustable switching hysteresis
- Relay changeover contact output
- 3-way isolation
- Adjustable operating/closed circuit current behavior
- Switching point can be freely selected in the measuring range of 0 ... 16 A AC
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Rated Insulation Voltage | 300 V AC (to earth) |
| Total error | ≤ 1.4 % (Temperature range) |
| Measuring category | III |
| Test voltage input/output | 3.5 kV (50 Hz, 1 min.) |
| Test voltage input/power supply | 3.5 kV (50 Hz, 1 min.) |
| Protective circuit | Surge protection; 33 V suppressor diode |
| Step response (10-90%) | 40 ms |
| Maximum temperature coefficient | < 0.02 %/K |
Supply
| Supply Voltage Range | 20 V DC ... 30 V DC |
| Max. current consumption | < 30 mA |
Measurement:
| Frequency measuring range | 45 Hz ... 60 Hz |
Measurement
| Input current range | 0 A AC ... 16 A AC (Permitted continuous overload: 120%) |
| Overload capacity | 2 x IN (continuous) |
| Nominal frequency fN | 50 Hz |
| Nominal frequency fN | 60 Hz |
| Frequency measuring range | 45 Hz ... 65 Hz |
| Curve type | Sine |
Switching: Relay
| Contact switching type | 1 changeover contact |
| Contact Material | AgSnO, hard gold-plated |
| Maximum Switching Voltage | 30 V AC |
| Maximum Switching Voltage | 36 V DC |
| Maximum Switching Voltage | 250 V AC (when the gold layer is destroyed) |
| Limiting Continuous Current | 50 mA (for gold layer, 30 V AC/ 36 V DC) |
| Limiting Continuous Current | 2 A (in case of a destroyed gold layer, 250 V AC) |
| Setting range of the response delay | typ. 0.1 s ... 10 s (Adjustable using a potentiometer) |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Connection Method | Through connection |
Item dimensions
| Width | 22.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Circular conductor
| Diameter | 4.2 mm |
Material specifications
| Color | green (RAL 6021) |
| Housing Material | Polyamide PA non-reinforced |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -20 °C ... 65 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C (non-condensing) |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
EMC data
| Noise immunity | EN 61000-6-2 |
| Note | When being exposed to interference, there may be minimal deviations. |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
Standards and Regulations
| Standards/regulations | IEC 61010-2-030 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2864464?
Proax is an authorized distributor of Phoenix Contact 2864464 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
MCR-SL-S-100-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...100 A, output voltage 0...(5) 10 V
MCR-SL-S-100-I-LP - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...100 A, loop-powered output with 4...20 mA
MCR-SL-S-200-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...200 A, output voltage 0...(5) 10 V
MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...200 A, loop-powered output with 4...20 mA
MCR-SL-S-400-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...400 A, output voltage 0...(5) 10 V
MCR-SL-S-400-I-LP - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...400 A, loop-powered output with 4...20 mA
MCR-SL-PT100-LP-I, MCR temperature transducers: programmable loop-powered temperature transducers for Pt 100 resistance thermometers
MCR temperature transducer for Pt 100, 2, 3, or 4-wire system, input -100 °C...600 °C, output signal 0(4) mA ... 20 mA
MCR-SL-D-FIT - MCR digital display, for measuring and displaying frequencies, pulses and times, 6-fig. display
MCR-SL-D-U-I - MCR digital display, for measurement and display of standard signals, 5-fig. display
MCR-SL-D-PT100 - MCR digital display, for measuring temperatures, PT resistance thermometer / 5-fig. display- MCR-SL-D-TE-JK - MCR digital display, for measuring temperatures, thermocouples / 5-fig. display
Digital setpoint encoders with manual and automatic ramp for defining current and voltage signals, 4-pos. display
MCR-SL-HT-PT 100-I - Measurement and control temperature transducer, for resistance thermometers, thermocouples, resistance-type sensors, and voltage sensors. For Pt 100 resistance temperature detectors.
MCR-SL-CUC-600-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 600 A input current, 4 ... 20 mA output
MCR-SL-CUC-500-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 500 A input current, 4 ... 20 mA output
MCR-SL-CUC-400-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 400 A input current, 4 ... 20 mA output
