Official DistributorSKU
MPN
MCR-SL-PT100-SP
Weight
0.124 kg
Series MCR-SL-PT100
MCR-SL-PT100-SP - Temperature monitoring
MCR temperature relay, for Pt 100 in 2-conductor technology, input: -100°C ... +700°C
- Adjustable switching hysteresis
- Electrical isolation
- Relay changeover contact output
- Switching point can be freely selected in the temperature range from -100°C ... +700°C
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Electrical properties
| Linearity error | < 0.1 % |
| Maximum power dissipation for nominal condition | 900 mW |
| Test voltage, input/output/supply | 1.5 kV AC (50 Hz, 60 s) |
| Maximum temperature coefficient | < 0.01 %/K |
| Temperature coefficient, typical | 0.005 %/K |
Supply
| Supply Voltage Range | 20 V DC ... 30 V DC |
| Max. current consumption | < 30 mA |
Measurement
| Sensor types (RTD) that can be used | Pt 100 (IEC 60751/EN 60751) |
| Temperature measuring range | -100 °C ... 700 °C |
| Sensor type: | -100 °C ... 700 °C (freely adjustable) |
| Sensor input current | approx. 1 mA |
| Connection technology | 2-conductor |
Switching: Relay
| Contact switching type | 1 changeover contact |
| Contact Material | AgSnO, hard gold-plated |
| Max. switching current | 50 mA (for gold layer, 30 V AC/ 36 V DC) |
| Max. switching current | 2 A (in case of a destroyed gold layer, 250 V AC) |
| Typical response time | approx. 6 ms |
| Typical release time | approx. 200 ms |
| Status display | Red LED (short-circuit/wire break) |
| Status display | Yellow LED (relay active) |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
Dimensions
| Width | 12.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color | green (RAL 6021) |
| Housing Material | Polyamide PA non-reinforced |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -20 °C ... 65 °C |
CE
| Certificate | CE-compliant |
UL, USA/Canada
| Identification | UL 508 Recognized |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2814948?
Proax is an authorized distributor of Phoenix Contact 2814948 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
MCR-SL-PT100-LP-I, MCR temperature transducers: programmable loop-powered temperature transducers for Pt 100 resistance thermometers
MCR temperature transducer for Pt 100, 2, 3, or 4-wire system, input -100 °C...600 °C, output signal 0(4) mA ... 20 mA
MCR-SL-HT-PT 100-I - Measurement and control temperature transducer, for resistance thermometers, thermocouples, resistance-type sensors, and voltage sensors. For Pt 100 resistance temperature detectors.
MCR-SL-S-100-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...100 A, output voltage 0...(5) 10 V
MCR-SL-S-100-I-LP - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...100 A, loop-powered output with 4...20 mA
MCR-SL-S-200-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...200 A, output voltage 0...(5) 10 V
MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...200 A, loop-powered output with 4...20 mA
MCR-SL-S-400-U - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...400 A, output voltage 0...(5) 10 V
MCR-SL-S-400-I-LP - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...400 A, loop-powered output with 4...20 mA
MCR-SL-S- 16-SP- 24 - MCR current protector, for sinusoidal alternating currents 0 … 16 A AC/ 1 changeover contact
MCR-SL-CUC-100-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 100 A input current, 4 ... 20 mA output
MCR-SL-CUC-100-U - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 100 A input current, 0 ... 10 V output
MCR-SL-CUC-200-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 200 A input current, 4 ... 20 mA output
MCR-SL-CUC-200-U - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 200 A input current, 0 ... 10 V output
MCR-SL-CUC-300-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 300 A input current, 4 ... 20 mA output
MCR-SL-CUC-300-U - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 300 A input current, 0 ... 10 V output
MCR-SL-CUC-400-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 400 A input current, 4 ... 20 mA output
MCR-SL-CUC-500-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 500 A input current, 4 ... 20 mA output
MCR-SL-CUC-600-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 600 A input current, 4 ... 20 mA output
