The figure shows the version IB IL PWM/2-PAC
Official DistributorSKU
MPN
2742612
Weight
0.144 kg
Series IB-IL-PWM
IB IL PWM/2 - Inline function terminal
Inline function terminal for pulse width and frequency modulation or activation of impulse-driven motor control parts with pulse/direction interface, two outputs for 5 V or 24 V
Technical Specifications
Product properties
| Type | modular |
| Number of plugs | 2 |
| Operating mode | Process data operation with 2 words |
Local diagnostics
| Error messages via the bus | Short-circuit or overload of the output |
Module
| ID code (dec.) | 191 |
| ID code (hex) | BF |
| Register length | 32 bit |
| Required parameter data | 1 Byte |
Electrical properties
| Test section | 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. |
| Test section | 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. |
| Test section | 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min. |
Supply
| I/O voltage | 24 V DC (via voltage jumper) |
| I/O voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Residual ripple | 5 % |
| Typical current consumption | approx. 100 mA |
Counter:
| Number of Inputs | 0 |
Output data
| Output Voltage | 5 V DC |
| Output Current | 10 mA (5 V) |
| Output Current | 500 mA (24 V) |
Digital
| Number of Outputs | 2 |
| Output Voltage | 24 V |
| Maximum Switching Voltage | 24 V (to segment circuit) |
| Output Voltage | 5 V |
Inline connector
| Connection Method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
Inline local bus
| Connection Method | Inline data jumper |
| Transmission Speed | 500 kbps |
| Transmission physics | Copper |
Dimensions
| Width | 24.4 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.) |
| Permissible humidity (storage/transport) | 75 % ... 85 % (Slight temporary condensation may sometimes appear on the housing, e.g. when the terminal block is brought out of a vehicle into an enclosed room.) |
Mounting
| Mounting Type | DIN rail mounting |
Why Proax for Phoenix Contact IB IL PWM/2?
Proax is an authorized distributor of Phoenix Contact IB IL PWM/2 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | IBILPWM2 |
| Pack Size | 1 |
Recommended
2861632 - Inline function terminal for pulse width and frequency modulation or activation of impulse-driven motor control parts with pulse/direction interface, two outputs for 5 V or 24 V
2860620 - Connector set, for power terminal block, copper, colored identification.
1185434 - Inline, Temperature measurement terminal, Analog RTD inputs: 4 (NTC, linear resistors), connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector
2702501 - Inline, Temperature measurement terminal, Analog RTD inputs: 4 (Pt 1000), connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector
2702499 - Inline, Temperature measurement terminal, Analog RTD inputs: 4 (Pt 100), connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector
2878476 - Adapter cable for the connection of the field multiplexer to the PSI-MOS interface module
2700965 - Inline power measurement terminal for direct measurement of AC currents up to 5 A, including neutral conductor current and phase conductor voltages up to 400 V AC (phase/neutral conductor) or 690 V AC (phase/phase) complete with accessories (connectors and labeling fields)
2819309 - Inline measurement terminal for absolute encoders, without accessories, 1 input for absolute rotation or position measurement systems, with SSI interface- 2819574 - Inline measurement terminal block for absolute encoders, complete with accessories (connector and labeling field), 1 input for absolute rotation or position measurement systems, with SSI interface
2861865 - Inline positioning terminal, complete with accessories, 1 absolute encoder input, 4 digital inputs 24 V DC, 4 digital outputs 24 V DC, 500 mA, 3-conductor connection technology
2836340 - Inline positioning terminal, without accessories, 1 absolute encoder input, 4 digital inputs 24 V DC, 4 digital outputs 24 V DC, 500 mA, 3-conductor connection technology
