Official Distributor
SKU
MPN
IB IL RTD 4/NTC-ECO
Weight
0.084 kg
This product is Not Cancellable/Not Returnable
Series IB-IL-RTD
IB IL RTD 4/NTC-ECO - Temperature module
Inline, Temperature measurement terminal, Analog RTD inputs: 4 (NTC, linear resistors), connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector
- 4 analog inputs
- Connection of sensors in 2-conductor technology
- Sensors supported: NTC, linear resistors
- Data format: standardized representation
- Diagnostic information in the process data word
- Linear input range from 0 kΩ to 100 kΩ
Technical Specifications
Dimensions
Width | 12.2 mm |
Height | 119.8 mm |
Depth | 71.5 mm |
Inline local bus
Number of interfaces | 2 |
Connection Method | Inline data jumper |
Transmission Speed | 500 kbps |
Module
ID code (dec.) | 126 |
ID code (hex) | 7E |
Length code (hex) | 04 |
Length code (dec) | 04 |
Process data channel | 64 bit |
Input address area | 8 Byte |
Output address area | 0 Byte |
Register length | 64 bit |
Required parameter data | 1 Byte |
Required configuration data | 4 Byte |
Analog
Input name | Analog RTD inputs |
Description of the input | Inputs for resistive temperature sensors |
Number of Inputs | 4 (NTC, linear resistors) |
Connection Method | Inline connector |
Connection technology | 2-conductor |
Note regarding the connection technology | shielded |
A/D conversion time | typ. 120 ms |
A/D converter resolution | 24 bit |
Data formats | Standardized representation |
Input filter | Digital filter |
Input filter time | 120 ms (per channel) |
Nominal value of the current sources | 10 µA (pulsed current, the data is valid during the sampling phase) |
Linear resistance measuring range | 0 Ω ... 100 kΩ |
Process data update | < 10 ms |
Protective circuit | Overload protection; max. ±40 V DC, 1 min. |
Protective circuit | Transient protection; Suppressor diode |
Product properties
Product family | Inline |
Type | modular |
Scope of delivery | including Inline connector |
Diagnostics messages | Failure of the internal I/O supply I/O error message sent to the bus coupler |
Diagnostics messages | Checksum error I/O error message sent to the bus coupler |
Potentials
Power consumption | typ. 0.67 W (entire device) |
Power consumption | max. 0.97 W (entire device) |
Potentials: Communications power (UL)
Supply Voltage | 7.5 V DC (via voltage jumper) |
Current draw | max. 85 mA |
Current draw | typ. 56 mA |
Potentials: Supply of analog modules (UANA)
Supply Voltage | 24 V DC (via voltage jumper) |
Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current draw | max. 14 mA |
Current draw | typ. 7.3 mA |
Electrical isolation/isolation of the voltage ranges
Test voltage: Bus logic (local bus, communications power) | 500 V AC, 50 Hz, 1 min. |
Test voltage: Analog I/O | 500 V AC, 50 Hz, 1 min. |
Test voltage: Functional ground | 500 V AC, 50 Hz, 1 min. |
Connection technology
Connection name | Inline connector |
Conductor connection
Connection Method | Spring-cage connection |
Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 |
Stripping length | 8 mm |
Inline connector
Connection Method | Spring-cage connection |
Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 |
Stripping length | 8 mm |
Ambient conditions
Ambient Temperature (Operation) | 0 °C ... 55 °C |
Degree of Protection | IP20 |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
Standards and Regulations
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
Mounting Type | DIN rail mounting |
Why Proax for Phoenix Contact 1185434?
Proax is an authorized distributor of Phoenix Contact 1185434 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended