Official Distributor
SKU
MPN
PSI-MODEM-SHDSL/SERIAL
Weight
0.354 kg
This product is Not Cancellable/Not Returnable
PSI-MODEM-SHDSL/SERIAL - Modem
Industrial SHDSL extender for serial RS-232/422/485 interfaces, point-to-point and line structures, serial data transmission up to 2000 kbps on in-house cables, diagnostics via USB and LEDs, two configurable alarm outputs
- Distances up to 20 km
- RS-232, up to 230.4 kbps
- RS-422, up to 2000 kbps
- RS-485, up to 2000 kbps
- Robust modulation method (SHDSL)
- 2 digital outputs for alerting external controllers
- Easy configuration
- For in-house cables
Technical Specifications
Utilization restriction
CCCex note | Use in potentially explosive areas is not permitted in China. |
Product properties
MTTF | 693 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
MTTF | 301 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
MTTF | 121 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
MTBF | 1004 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
MTBF | 199 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) |
Electrical properties
Electrical isolation | VCC, RS-232 // RS-422, RS-485 // DSL (A) // DSL (B) // FE |
Maximum power dissipation for nominal condition | 4.32 W |
Mains type | Permanent line |
Test voltage data interface/power supply | 500 V AC (In accordance with EN/IEC 60079-7) |
Test voltage data interface/power supply | 1.5 kVrms (50 Hz, 1 min.) |
Supply
Supply Voltage Range | 18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block) |
Nominal Supply Voltage | 24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply) |
Nominal Supply Voltage | 5 V DC (configuration only, via mini-USB type B) |
Typical current consumption | < 180 mA (24 V DC) |
Max. current consumption | ≤ 2 A (For operation in a joining station, via the DIN rail connector) |
Function
Management | User-friendly software: Guided configuration, plausibility checks, diagnostic functions, log book |
Status and diagnostic indicators | LEDs: VCC (supply voltage), RD/TD (serial data traffic), ERR (errors), TERM (termination resistor active), RS-232 (RS-232 active)2 x LINK / 2 x STAT (DSL data traffic port A and port B), DIAG (diagnostic messages) |
Signal
Output name | Digital output |
Number of Outputs | 2 |
Voltage output signal | 18 V DC ... 30 V DC (depending on the operating voltage) |
Current Output Signal | ≤ 150 mA (Short-circuit-proof) |
Supply
Connection Method | COMBICON plug-in screw terminal block |
Tightening torque | 0.56 Nm ... 0.79 Nm |
Interfaces
Signal | RS-232 |
Signal | RS-422 |
Signal | RS-485 |
Signal | Modbus |
Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Serial transmission speed | 0.11/0.3/1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4 kbps, NRZ |
Connection Method | D-SUB 9 plug |
Transmission length | max. 15 m |
Termination resistor | 390 Ω - 180 Ω - 390 Ω (can be connected) |
Data flow control/protocols | Software handshake, Xon/Xoff, hardware handshake (RTS/CTS), 3964R-compatible, Modbus (RTU/ASCII), transparent protocol - additional protocols supported |
Data: SHDSL interface according to ITU-T G.991.2.bis
Serial transmission speed | 4-wire operation: 64 kbps ... 30 Mbps |
Serial transmission speed | 2-wire operation: 32 kbps ... 15.3 Mbps |
Connection Method | 2 x 2-pos. COMBICON plug-in screw terminal blocks |
Tightening torque | 0.56 Nm ... 0.79 Nm |
Transmission length | ≤ 20 km (Depending on data rate and cable cross section) |
Single conductor/terminal point, rigid | 0.2 mm² ... 2.5 mm² |
Single-wire/terminal point, flexible | 0.2 mm² ... 2.5 mm² |
Max. AWG conductor cross section, flexible | 14 |
Min. AWG conductor cross section, flexible | 24 |
Single-wire/terminal point, rigid AWG max. | 14 |
Single-wire/terminal point, rigid AWG min. | 24 |
Stripping length | 7 mm |
Data: USB 2.0
Connection Method | Mini-USB type B, 5-pos. |
Transmission length | < 5 m (only for configuration and diagnostics) |
Data: RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1
Serial transmission speed | 1.2/2.4/4.8/7.0/9.6/19.2/38.4/57.6/75/93.75/115.2/136/187.5/375/500/1500/2000 kbps, NRZ |
Connection Method | Plug-in/screw connection via COMBICON |
Transmission length | ≤ 1200 m |
Termination resistor | 390 Ω - 180 Ω - 390 Ω (can be connected) |
File format/coding | Serial asynchronous UART/NRZ, 7/8 data bits, 1/2 stop bits, 1 parity bit (even, odd, mark, space, none), 9/10/11-bit character length |
Data flow control/protocols | Automatic control // Modbus RTU/ASCII |
Data: RS-485 interface, in acc. with EIA/TIA-485, DIN 66259-4/RS-485 2-wire
Serial transmission speed | 1.2/2.4/4.8/7.0/9.6/19.2/38.4/57.6/75/93.75/115.2/136/187.5/375/500/1500/2000 kbps, NRZ |
Connection Method | Plug-in/screw connection via COMBICON |
Transmission length | ≤ 1200 m |
Termination resistor | 390 Ω - 180 Ω - 390 Ω (can be connected) |
File format/coding | Serial asynchronous UART/NRZ, 7/8 data, 1/2 stop, 1 parity, 10/11-bit character length |
Protocols Supported | Transparent, including 3964R protocol |
Data flow control/protocols | Automatic control // Modbus RTU/ASCII |
Dimensions
Width | 35 mm |
Height | 99 mm |
Depth | 114.5 mm |
Material specifications
Color (Housing) | green (RAL 6021) |
Material (Housing) | PA 6.6-FR |
Flammability rating according to UL 94 | V0 |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -20 °C ... 60 °C (Freestanding (40 mm spacing to the right and left), no supply of other modules via the device) |
Ambient Temperature (Operation) | -20 °C ... 55 °C (Mounted in rows with zero spacing and low power dissipation of aligned modules) |
Ambient Temperature (Operation) | -20 °C ... 50 °C (Mounted in rows with zero spacing) |
Ambient Temperature (Operation) | -20 °C ... 45 °C (aligned without spacing and supply of other modules via the device, 1.5 A) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
CE
Certificate | CE-compliant |
ATEX
Identification | II 3 G Ex ec nC IIC T4 Gc |
Certificate | PxCIF11ATEX2313643X |
Note | Please follow the special installation instructions in the documentation! |
UKEX
Identification | II 3 G Ex ec nC IIC T4 Gc |
Certificate | PxCIMA22UKEX2313643X |
UL, USA/Canada
Identification | 508 Listed |
Corrosive gas test
Identification | ISA-S71.04-1985 G3 Harsh Group A |
EMC data
Noise immunity | EN 61000-6-2 |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 55011 |
Standards and Regulations
Standards/regulations | EN 50121-4 |
Standard designation | Railway applications - Electromagnetic compatibility, Part 4: Emission and immunity of the signaling and telecommunications apparatus |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | The product can be snapped onto all 35 mm DIN rails in accordance with EN 60715. |
Accessories
Why Proax for Phoenix Contact 2313669?
Proax is an authorized distributor of Phoenix Contact 2313669 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended