Official Distributor
SKU
MPN
SACC-MS-5CON-PG11-DUO-M SCO
Weight
0.031 kg
This product is Not Cancellable/Not Returnable
Series SACC-MS
SACC-MS-5CON-PG11-DUO-M SCO - Connector
Connector, Universal, 5-position, Plug straight M12 SPEEDCON, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11-DUO, external cable diameter 2.1 mm ... 3 mm / 4 mm ... 5.2 mm
- Safe use in the field, thanks to a high degree of protection
- Save time, thanks to installation with SPEEDCON fast locking system
- Screw connection: proven connection technology for a large selection of different conductors
- Save space: connect two sensors to one connector with a multiple grommet
Technical Specifications
Notes
Assembly instruction: | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Mounting
Assembly instructions | This connector includes one seal for small and one seal for large outer cable diameters. |
Product properties
Sensor Type | Universal |
Number of Positions | 5 |
No. of cable outlets | 2 |
Shielded | no |
Coding | A |
Cable outlet | straight |
Pg screw connection | Pg11 |
Insulation characteristics
Overvoltage category | II |
Degree of pollution | 3 |
Dimensions
Length | 63 mm |
External dimensions
Outside diameter | 2x 2.1 mm ... 3 mm (when using the seal for small outer cable diameters) |
Outside diameter | 2x 4 mm ... 5.2 mm (when using the seal for large outer cable diameters) |
Housing
Diameter housing | 20 mm |
Material specifications
Seal material | NBR |
Material of grip body | PA |
Contact Material | CuZn |
Contact surface material | CuSnZn |
Contact carrier material | PA |
Material for screw connection | Zinc die-cast, nickel-plated |
Conductor connection
Connection Method | Screw connection |
Connection cross section | 0.25 mm² ... 0.75 mm² (without ferrule) |
Connection cross section | 0.14 mm² ... 0.75 mm² (with ferrule) |
Connection cross section | 0.25 mm² ... 0.75 mm² (solid) |
Connection cross section AWG | 24 ... 18 (without ferrule) |
Connection cross section AWG | 26 ... 20 (with ferrule) |
Stripping length of the individual wire | 5 mm |
Tightening torque | 0.4 Nm (M12 knurl) |
Tightening torque | 0.2 Nm (Screw terminal blocks) |
Tightening torque | 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing) |
Electrical properties
Rated surge voltage | 1.5 kV |
Contact resistance | ≤ 8 mΩ |
Insulation resistance | ≥ 100 MΩ |
Nominal voltage UN | 48 V AC |
Nominal voltage UN | 60 V DC |
Nominal current IN | 4 A |
Mechanical data
Insertion/withdrawal cycles | ≥ 100 |
Connection 1
Head design | Plug |
Head cable outlet | straight |
Head thread type | M12 |
Head locking type | SPEEDCON |
Coding | A |
Cable/line
Signal type/category | Universal |
Stripping length of the individual wire | 5 mm |
Ambient conditions
Degree of Protection | IP67 |
Ambient Temperature (Operation) | -40 °C ... 85 °C (Plug / socket) |
M12
Standard designation | M12 connector |
Standards/specifications | IEC 61076-2-101 |
Accessories
Why Proax for Phoenix Contact 1543016?
Proax is an authorized distributor of Phoenix Contact 1543016 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended