Official Distributor
SKU
MPN
1521591
Weight
0.015 kg
Series SACC-MS
SACC-MS-4QO-0,75-M SCO - Connector
Connector, Universal, 4-position, Plug straight M12 SPEEDCON, coding: A, Insulation displacement connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm
- Safe use in the field, thanks to a high degree of protection
- Save time, thanks to installation with SPEEDCON fast locking system
- Insulation displacement connection: innovative and time-saving assembly without stripping the single wire
Technical Specifications
Notes
Assembly instruction: | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Mounting
Assembly instructions | AWG 18 wire cross section upon request |
Product properties
Sensor Type | Universal |
Number of Positions | 4 |
No. of cable outlets | 1 |
Shielded | no |
Coding | A |
Cable outlet | straight |
Insulation characteristics
Overvoltage category | III |
Degree of pollution | 3 |
Dimensions
Length | 55 mm |
Wrench size, union nut | 15 mm |
Wrench size, counter nut | 15 mm |
External dimensions
Outside diameter | 4 mm ... 8 mm |
Housing
Diameter housing | 18.4 mm |
Material specifications
Flammability rating according to UL 94 | V0 |
Seal material | NBR |
Material of grip body | PA 6 |
Contact Material | CuSn |
Contact surface material | Ni/Au |
Contact carrier material | TPU |
Material for screw connection | Zinc die-cast, nickel-plated |
Wire insulation material | PVC / PE / PP / rubber |
Conductor connection
Connection Method | Insulation displacement connection |
Connection cross section | 0.34 mm² ... 0.75 mm² |
Connection cross section AWG | 22 ... 18 |
Tightening torque | 0.4 Nm (M12 knurl) |
Tightening torque | 1.5 Nm (Pressure nut) |
Pin assignment
Contact | Color (signal designation) | Contact (optional) | 1 = BN |
Contact | Color (signal designation) | Contact (optional) | 2 = WH |
Contact | Color (signal designation) | Contact (optional) | 3 = BU |
Contact | Color (signal designation) | Contact (optional) | 4 = BK |
Electrical properties
Rated surge voltage | 4 kV |
Contact resistance | ≤ 5 mΩ |
Insulation resistance | ≥ 100 MΩ |
Nominal voltage UN | 250 V AC |
Nominal voltage UN | 250 V DC |
Nominal current IN | 4 A |
Mechanical data
Insertion/withdrawal cycles | ≥ 100 |
Connection 1
Head design | Plug |
Head cable outlet | straight |
Head thread type | M12 |
Head locking type | SPEEDCON |
Coding | A |
Cable/line
Signal type/category | Universal |
External Cable Diameter | 4 mm ... 8 mm |
Ambient conditions
Degree of Protection | IP65 |
Degree of Protection | IP67 |
Ambient Temperature (Operation) | -25 °C ... 80 °C (Plug / socket) |
Ambient temperature (assembly) | -5 °C ... 50 °C (During assembly) |
Standards and Regulations
Standard designation | M12 connector |
Standards/specifications | according to IEC 61076-2-101 |
Accessories
Why Proax for Phoenix Contact SACC-MS-4QO-0,75-M SCO?
Proax is an authorized distributor of Phoenix Contact SACC-MS-4QO-0,75-M SCO and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Alternate Names | SACCMS4QO075MSCO |
Pack Size | 1 |
Recommended