Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2703011
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
INJ 2101-T
Weight
0.488 kg
This product is Not Cancellable/Not Returnable
Series INJ

INJ 2101-T - Injector

PoE injector, 30 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection

  • Extended temperature range of -40 °C ... +75 °C
  • Fast connection of the PoE cable
  • Wiring space covered with front panel cover
  • Integrated surge protection to ensure high system availability
  • Electrical isolation of the internal power supply unit for protection against short circuits on the PoE side
  • 10/100/1000 Mbps
Technical Specifications

Dimensions

Width30.2 mm
Height130 mm
Depth120 mm

Utilization restriction

CCCex noteUse in potentially explosive areas is not permitted in China.

Material specifications

Color (Housing)light grey (RAL 7035)
Material (Housing)Plastic
Flammability rating according to UL 94V0

Mounting

Mounting TypeDIN rail mounting
Mounting Positionvertical

Interfaces

Basic FunctionsPSE/Midspan, compliant with IEEE 802.3af, at

Data: Power over Ethernet

Serial transmission speed10/100/1000 Mbps
Frequency Range125 MHz
Connection MethodScrew connection
Note on the connection methodCAT5e
No. of channels1
Tightening torque0.22 Nm ... 0.25 Nm
Pin assignment1:1
Transmission length100 m (including patch cables)
Single conductor/terminal point, rigid0.14 mm² ... 1.5 mm²
Single-wire/terminal point, flexible0.14 mm² ... 1.5 mm²
Max. AWG conductor cross section, flexible16
Min. AWG conductor cross section, flexible28
Single-wire/terminal point, rigid AWG max.16
Single-wire/terminal point, rigid AWG min.28
Stripping length5 mm
Output nominal voltage54 V DC (PoE)
Output Power30 W
Maximum output power40 W (UL)

Data: Ethernet

Connection MethodRJ45 jack
Note on the connection methodCAT5e

Product properties

IEC test classificationC2
MTTF1510 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
MTTF661 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
MTTF256 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

Electrical properties

Electrical isolationVCC // SCM + FE // PoE
Maximum power dissipation for nominal condition7 W (at 18 V DC)
Maximum power dissipation for nominal condition5 W (24 V DC ... 48 V DC)
Test voltage data interface/power supply1.5 kV AC (50 Hz, 1 min.)

Supply

Supply Voltage Range18 V DC ... 57 V DC
Nominal Supply Voltage24 V DC (SELV/PELV, restrictions for ATEX applications)
Nominal Supply Voltage48 V DC
Max. current consumption2.1 A
Max. current consumption1.4 A (24 V DC, Ex areas in accordance with UL-HazLoc)
Max. current consumption0.7 A (48 V DC, Ex areas in accordance with UL-HazLoc)
Power consumption≤ 40 W
Protective circuitReverse polarity protection

Function

DesignationShield current monitoring
Switch-on threshold≥ 30 mA
Local diagnosticsYellow LED
Precision± 5 %
Response time3 s
Current≤ 2 A
Power consumption270 mW (Shield current monitoring)

Supply

Connection MethodScrew connection
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 2.5 mm²
Single conductor/terminal point, rigid0.2 mm² ... 2.5 mm²
Single-wire/terminal point, flexible0.2 mm² ... 2.5 mm²
Conductor cross section, flexible [AWG]20 ... 12

Ambient conditions

Degree of ProtectionIP20 (Manufacturer's declaration)
Ambient Temperature (Operation)-40 °C ... 65 °C (75°C, observe derating)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Altitude≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Altitude≤ 2000 m (Restrictions for ATEX applications)
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Air pressure (operation)80 kPa ... 110 kPa (Restrictions for ATEX applications)

Standards and Regulations

Standards/regulationsIEC 61643-21

CE

CertificateCE-compliant

ATEX

Identification II 3G Ex ec nC IIC T4 Gc
CertificatePxCIF19ATEX2703011X
NotePlease follow the special installation instructions in the documentation!

UL, USA/Canada

IdentificationClass I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
IdentificationClass I, Div. 2, Groups A, B, C, D

UL, USA

CertificateUL 60079-0 Ed. 6 / UL 60079-15 Ed. 4

UL, Canada

CertificateCSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16

Corrosive gas test

IdentificationISA-S71.04-1985 G3 Harsh Group A

Power over Ethernet

IdentificationIEEE 802.3af
IdentificationIEEE 802.3at

EMC data

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Electromagnetic compatibilityFCC Part 15B Class A
Electromagnetic compatibilityCISPR 22

Electrostatic discharge

Standards/regulationsEN 61000-4-2
Contact discharge± 6 kV (Test Level 3)
Discharge in air± 8 kV (Test Level 3)
Indirect discharge± 6 kV
CommentsCriterion B

Electromagnetic HF field

Standards/regulationsEN 61000-4-3
Frequency Range80 MHz ... 3 GHz (Test Level 3)
Field intensity10 V/m
CommentsCriterion A

Fast transients (burst)

Standards/regulationsEN 61000-4-4
Input± 2.2 kV (1 minute)
Signal± 2.2 kV (1 minute)
CommentsCriterion B

Surge current load (surge)

Standards/regulationsEN 61000-4-5
Input± 0.5 kV
Signal± 1 kV (Data line, asymmetrical)
Signal± 2 kV (I/O cable on field side only, asymmetric)
CommentsCriterion B

Conducted interference

Standards/regulationsEN 61000-4-6
Frequency Range0.15 MHz ... 80 MHz
CommentsCriterion A
Voltage10 V

Emitted interference

Standards/regulationsEN 61000-6-4
CommentsClass A, industrial applications
Standards/regulationsEN 61000-6-3
CommentsClass B, domain of use: residential and small commercial

Criteria

Criterion ANormal operating behavior within the specified limits.
Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

Functionality

Basic FunctionsPSE/Midspan, compliant with IEEE 802.3af, at

Signaling

Optical representationYellow LED

Why Proax for Phoenix Contact 2703011?

Proax is an authorized distributor of Phoenix Contact 2703011 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact2703012
    2703012
    2703012 - PoE injector, 30 W, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
  • Phoenix Contact1004065
    1004065
    1004065 - PoE injector, 30 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
  • Phoenix Contact2703013
    2703013
    2703013 - PoE injector, 60 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
  • Phoenix Contact2703014
    2703014
    2703014 - PoE injector, 60 W, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
  • Phoenix Contact1004066
    1004066
    1004066 - PoE injector, 60 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
  • Phoenix Contact2703009
    2703009
    2703009 - PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C, potential separation
  • Phoenix Contact2703010
    2703010
    2703010 - PoE injector, 60 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C, potential separation
  • Phoenix Contact2703006
    2703006
    2703006 - PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C
  • Phoenix Contact2703005
    2703005
    2703005 - PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20
  • Phoenix Contact2703008
    2703008
    2703008 - PoE injector, 60 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C
  • Phoenix Contact2703007
    2703007
    2703007 - PoE injector, 60 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20

Available for order

Phoenix Contact Availability