Official DistributorSKU
MPN
2703005
Weight
0.397 kg
This product is Not Cancellable/Not Returnable
Series INJ
INJ 1000 - Injector
PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20
- Extended supply voltage range of 18 V DC ... 57 V DC, redundant
- 10/100/1000 Mbps
- Mounting on a DIN rail
- Safe shield connection to ground potential
Technical Specifications
Dimensions
| Width | 30.2 mm |
| Height | 130 mm |
| Depth | 120 mm |
Material specifications
| Color | gray |
| Housing Material | Plastic |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | vertical |
Interfaces
| Basic Functions | PSE/Midspan, compliant with IEEE 802.3af, at |
Data: Power over Ethernet
| Serial transmission speed | 10/100/1000 Mbps |
| Connection Method | RJ45 jack |
| No. of channels | 1 |
| Pin assignment | 1:1 |
| Transmission length | 100 m (including patch cables) |
| Output nominal voltage | 54 V DC (PoE) |
| Output Power | 30 W |
Data: Ethernet
| Connection Method | RJ45 CAT5e |
Product properties
| MTTF | 110 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
Electrical properties
| Maximum power dissipation for nominal condition | 33.6 W |
Supply
| Supply Voltage Range | 18 V DC ... 57 V DC (Ordinary locations) |
| Supply Voltage Range | 24 V DC ... 48 V DC (Hazardous locations) |
| Nominal Supply Voltage | 24 V DC |
| Nominal Supply Voltage | 48 V DC |
| Max. current consumption | 2.1 A |
| Max. current consumption | 1.4 A (24 V DC) |
| Max. current consumption | 0.7 A (48 V DC) |
| Power consumption | ≤ 36 W |
| Protective circuit | Reverse polarity protection |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.20 mm² ... 2.50 mm² |
| Conductor cross section, rigid | 0.20 mm² ... 2.50 mm² |
| Conductor cross section AWG | 20 ... 12 |
Ambient conditions
| Degree of Protection | IP20 (Non-certificated by UL) |
| Ambient Temperature (Operation) | 0 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Altitude | ≤ 2000 m (with UL approval) |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
CE
| Identification | CE-compliant |
EAC
| Identification | EAC |
UL, USA/Canada
| Identification | Class I, Div. 2, Groups A, B, C, D T4 |
Corrosive gas test
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
EMC data
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Electrostatic discharge
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | ± 6 kV (Test Level 3) |
| Discharge in air | ± 8 kV (Test Level 3) |
| Indirect discharge | ± 6 kV |
| Comments | Criterion B |
Electromagnetic HF field
| Standards/regulations | EN 61000-4-3 |
| Frequency Range | 80 MHz ... 3 GHz (Test Level 3) |
| Field intensity | 10 V/m |
| Comments | Criterion A |
Fast transients (burst)
| Standards/regulations | EN 61000-4-4 |
| Input | ± 2.2 kV (1 minute) |
| Signal | ± 2.2 kV (1 minute) |
| Comments | Criterion B |
Surge current load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | ± 0.5 kV |
| Signal | ± 1 kV (Data line, asymmetrical) |
| Signal | ± 2 kV (I/O cable on field side only, asymmetric) |
| Comments | Criterion B |
Conducted interference
| Standards/regulations | EN 61000-4-6 |
| Frequency Range | 0.15 MHz ... 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V |
Emitted interference
| Standards/regulations | EN 61000-6-4 |
| Comments | Class A, industrial applications |
| Standards/regulations | EN 61000-6-3 |
| Comments | Class B, domain of use: residential and small commercial |
Functionality
| Basic Functions | PSE/Midspan, compliant with IEEE 802.3af, at |
Why Proax for Phoenix Contact INJ 1000?
Proax is an authorized distributor of Phoenix Contact INJ 1000 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | INJ1000 |
| Pack Size | 1 |
Recommended
2703006 - PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C- 2703008 - PoE injector, 60 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C
- 2703009 - PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C, potential separation
- 2703010 - PoE injector, 60 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C, potential separation
2703011 - PoE injector, 30 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
2703012 - PoE injector, 30 W, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
1004065 - PoE injector, 30 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection- 2703013 - PoE injector, 60 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
- 2703014 - PoE injector, 60 W, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
- 1004066 - PoE injector, 60 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection