Official DistributorSKU
MPN
2703010
Weight
0.449 kg
This product is Not Cancellable/Not Returnable
Series INJ
INJ 1110-T - Injector
PoE injector, 60 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C, potential separation
- Extended temperature range of -40 °C ... +75 °C
- Extended supply voltage range of 18 V DC ... 57 V DC, redundant
- Electrical isolation of the internal power supply unit for protection against short circuits on the PoE side
- 10/100/1000 Mbps
Technical Specifications
Dimensions
| Width | 30.2 mm |
| Height | 130 mm |
| Depth | 120 mm |
Utilization restriction
| CCCex note | Use in potentially explosive areas is not permitted in China. |
Material specifications
| Color (Housing) | light grey (RAL 7035) |
| Material (Housing) | Plastic |
| Flammability rating according to UL 94 | V0 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | vertical |
Interfaces
| Basic Functions | PSE/Midspan, compliant with IEEE 802.3af, at |
Data: Power over Ethernet
| Serial transmission speed | 10/100/1000 Mbps |
| Frequency Range | 125 MHz |
| Connection Method | RJ45 jack |
| Note on the connection method | CAT5e |
| No. of channels | 1 |
| Pin assignment | 1:1 |
| Transmission length | 100 m (including patch cables) |
| Output nominal voltage | 54 V DC (PoE) |
| Output Power | 60 W |
| Maximum output power | 75 W (UL) |
Data: Ethernet
| Connection Method | RJ45 jack |
| Note on the connection method | CAT5e |
Product properties
| MTTF | 3062 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 1397 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
| MTTF | 558 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Electrical properties
| Electrical isolation | VCC // FE // PoE |
| Maximum power dissipation for nominal condition | 12 W (at 18 V DC) |
| Maximum power dissipation for nominal condition | 9 W (24 V DC ... 48 V DC) |
| Test voltage data interface/power supply | 500 V (50 Hz, 1 min.) |
Supply
| Supply Voltage Range | 18 V DC ... 57 V DC |
| Nominal Supply Voltage | 24 V DC (SELV/PELV, restrictions for ATEX applications) |
| Nominal Supply Voltage | 48 V DC |
| Max. current consumption | 4.2 A |
| Max. current consumption | 2.73 A (24 V DC, Ex areas in accordance with UL-HazLoc) |
| Max. current consumption | 1.34 A (48 V DC, Ex areas in accordance with UL-HazLoc) |
| Power consumption | ≤ 75 W |
| Protective circuit | Reverse polarity protection |
Function
| Current | ≤ 2 A |
Supply
| Connection Method | Push-in connection |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Single conductor/terminal point, rigid | 0.2 mm² ... 2.5 mm² |
| Single-wire/terminal point, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section, flexible [AWG] | 20 ... 12 |
| Stripping length | 10.00 mm |
Ambient conditions
| Degree of Protection | IP20 (Manufacturer's declaration) |
| Ambient Temperature (Operation) | -40 °C ... 45 °C (75°C, observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Altitude | ≤ 2000 m (Restrictions for ATEX applications) |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Air pressure (operation) | 80 kPa ... 110 kPa (Restrictions for ATEX applications) |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | PxCIF19ATEX2703010X |
| Note | Please follow the special installation instructions in the documentation! |
UL, USA/Canada
| Identification | Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4 |
| Identification | Class I, Div. 2, Groups A, B, C, D |
UL, USA
| Certificate | UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4 |
UL, Canada
| Certificate | CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16 |
Corrosive gas test
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
Power over Ethernet
| Identification | IEEE 802.3af |
| Identification | IEEE 802.3at |
EMC data
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Electromagnetic compatibility | FCC Part 15B Class A |
| Electromagnetic compatibility | CISPR 22 |
Electrostatic discharge
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | ± 6 kV (Test Level 3) |
| Discharge in air | ± 8 kV (Test Level 3) |
| Comments | Criterion B |
Electromagnetic HF field
| Standards/regulations | EN 61000-4-3 |
| Frequency Range | 80 MHz ... 3 GHz (Test Level 3) |
| Field intensity | 10 V/m |
| Comments | Criterion A |
Fast transients (burst)
| Standards/regulations | EN 61000-4-4 |
| Input | ± 2.2 kV (1 minute) |
| Signal | ± 2.2 kV (1 minute) |
| Comments | Criterion B |
Surge current load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | ± 0.5 kV |
| Signal | ± 1 kV (Data line, asymmetrical) |
| Signal | ± 2 kV (I/O cable on field side only, asymmetric) |
| Comments | Criterion B |
Conducted interference
| Standards/regulations | EN 61000-4-6 |
| Frequency Range | 0.15 MHz ... 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V |
Emitted interference
| Standards/regulations | EN 61000-6-4 |
| Comments | Class A, industrial applications |
| Standards/regulations | EN 61000-6-3 |
| Comments | Class B, domain of use: residential and small commercial |
Criteria
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Functionality
| Basic Functions | PSE/Midspan, compliant with IEEE 802.3af, at |
Why Proax for Phoenix Contact INJ 1110-T?
Proax is an authorized distributor of Phoenix Contact INJ 1110-T and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | INJ1110T |
| Pack Size | 1 |
Recommended
2703009 - PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C, potential separation- 2703008 - PoE injector, 60 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C
- 2703006 - PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C
2703013 - PoE injector, 60 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
2703014 - PoE injector, 60 W, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
1004066 - PoE injector, 60 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection- 2703011 - PoE injector, 30 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
- 2703012 - PoE injector, 30 W, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
- 1004065 - PoE injector, 30 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection