System cabling for controllers

FLKM 50-PA-S300 - VARIOFACE front adapter, for Siemens SIMATIC® S7-300, 1x 32 channels can be connected

FLKM 14/8M/SI/PLC - VARIOFACE module, for 8 channels, each with an additional terminal block and fuse per signal, (common minus potential)

FLKM 50/32M/SI/PLC - VARIOFACE module, for 32 channels, each with an additional terminal block and fuse per signal, (common minus potential)

FLKM 50-PA-S400 - VARIOFACE front adapter, for Siemens SIMATIC® S7-400, 1x 32 channels can be connected

Cable - FLK 40/EZ-DR/ 100/SLC

Cable - FLK 40/EZ-DR/ 150/SLC

Cable - FLK 40/EZ-DR/ 200/SLC

Cable - FLK 40/EZ-DR/ 300/SLC

FLKM 50-PA-S400(3-48) - VARIOFACE front adapter, for Siemens SIMATIC® S7-400, only analog

FLKM-2FLK14/KDS3-MT/PPA/S7 - VARIOFACE termination board for Siemens SIMATIC® S7-300, for max. 16 channels with SIMATIC®-specific marking (1-20), knife-disconnect terminal block, and test pick-off, module width: 113 mm

PLC-V8/D15S/OUT - V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: D-SUB pin strip 1x 15-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend

PLC-V8/D15B/OUT - V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: D-SUB socket strip 1x 15-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend

PLC-V8/D15S/IN - V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of input cards, connection 1: D-SUB pin strip 1x 15-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend

PLC-V8/D15B/IN - V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of input cards, connection 1: D-SUB socket strip 1x 15-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend

Front adapter, 4 x 8 channels can be connected for SIMATIC S7-300, 14-pos.

Cable - FLK 20/EZ-DR/ 300KONFEK

Cable - FLK 20/EZ-DR/ 600KONFEK

Cable - FLK 20/EZ-DR/ 800KONFEK

Cable - FLK 20/EZ-DR/1000KONFEK

Cable - FLK 50/4X14/EZ-DR/ 50/KONFEK