Programmable Logic Controllers (PLC)

Ethernet unit for CS-series, 100Base-TX and 10 Base-T, 1 x RJ45 socket, TCP/IP & UDP/IP socket services, FTP, SMTP, FINS

Serial communication unit, 2x RS-422/485 ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave

Analog high-speed input unit, 4 x inputs 1 to 5 V, 0 to 5 V, 0 to 10 V, -5 to 5 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA, screw terminal

Digital output unit, 8 x triac outputs, 250 VAC, 0.6 A, screw terminal

Digital output unit, 8 x transistor outputs, PNP, 2.0 A, 24 VDC, screw terminal

CPU backplane with C200H I/O BUS, 8 I/O slots

Controller Link unit for CS-series, 2-wire twisted pair, screw connectors

CP2E series compact PLC - Essential Type; 12 DI, 8DO; Relay output; Power supply 220 VAC; 4 kStep Program memory

CP2E series compact PLC - Network type; 12 DI, 8DO; Relay output; Power supply 24 VDC; 10 kStep Program memory

CP2E series compact PLC - Network type; 36 DI, 24DO; Relay output; Power supply 220 VAC; 10 kStep Program memory

CP2E series compact PLC - Network type; 36 DI, 24DO; PNP output; Power supply 24 VDC; 10 kStep Program memory

Counter Module

Sysmac NJ5 CPU, 20 mB memory, built-in EtherCAT (16 servo axes, in total 192 EtherCAT nodes) and EtherNet/IP

2 loops, Thermocouple/Pt100 input, PNP 4 Digital Outputs 24 VDC, 21mA/point, Heat and Cool control, Push-in Plus terminals

2 loops, Thermocouple/Pt100 input, 2 Analog Outputs, 4 - 20 mA, resolution 1:10000, Heat or Cool control, Push-in Plus terminals

Sysmac NX1P CPU with 40 Digital Transistor I/O (NPN), 1.5 MB memory, EtherCAT (4 servo axes, 4 PTP axes, 16 EtherCAT nodes), EtherNet/IP and 2 serial option ports

0.4 A Current Consumption at 5 VDC Profibus Master Unit

1 Machine Units FLNet Network Unit

Digital I/O unit, 32 x 5 VDC TTL inputs, 32 x 5 VDC TTL outputs, 2 x MIL40 connectors(not included)

Controller Link 3-pole terminal block, 5 pcs.