Programmable Logic Controllers (PLC)

Serial communication unit, 2x RS-422/485 ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave

1 Machine Units FLNet Network Unit

Digital I/O unit, 32 x 5 VDC TTL inputs, 32 x 5 VDC TTL outputs, 2 x MIL40 connectors(not included)

Controller Link 3-pole terminal block, 5 pcs.

Temperature control unit, Pt100 RTD inputs, transistor (NPN) output, 2 loops, heater burnout detection function

CPU, 20K steps program, 32K words data memory, 7 expansion racks max.

CPU, 30K steps program, 64K words data memory, 7 expansion racks max.

CPU backplane with C200H I/O BUS, 2 I/O slots

Flynet Module

Expansion I/O control unit, to connect CS1 CPU Rack to Long-Distance Expansion Racks (50m max.)

Expansion I/O interface unit, to connect Long-Distance Expansion Racks (CS1W-BIxx2) to CS1 CPU Rack (50m max.)

Digital interrupt input unit, 16 x 24 VDC inputs, NPN/PNP

Digital I/O unit, 32 x 24 VDC inputs NPN/PNP, 32 x transistor outputs NPN 0.3 A 12-24 VDC

Digital I/O unit, 48 x 24 VDC inputs, 48 x transistor outputs, NPN, 0.1 A, 12-24 VDC

Digital I/O unit, 48 x 24 VDC inputs, 48 x transistor outputs, PNP, 0.1 A, 12-24 VDC

Digital output unit, 96 x transistor outputs, PNP, 0.1 A, 12-24 VDC

Isolated thermocouple input unit, 4 x inputs type K, J, L, R, S, T, B, U, C (WRe5-26), P (PLII), -100 to +100 mV, resolution 1:64000

Repeater Unit

Repeater Unit

Sysmac NJ5 CPU, 20 mB memory, built-in EtherCAT (16 servo axes, in total 192 EtherCAT nodes) and EtherNet/IP