Programmable Logic Controllers (PLC)

PLC, 24 VDC supply, 36 x 24 VDC inputs, 24 x PNP outputs 0.3 A, 10K steps program + 32K words data memory

Duplex CPU backplane, 5 I/O slots, use CS1D-PA207R power supplies only

CPU, 20K steps program, 64K words data memory, 2 expansion racks max.

Analog input unit, 4 x inputs 1 to 5 V, 0 to 5 V, 0 to 10 V, -10 to 10 V, 4 to 20 mA, resolution 1:4000 / 8000

CPU backplane with C200H I/O BUS, 8 I/O slots

CPU backplane with C200H I/O BUS, 10 I/O slots

Controller Link unit for CS-series, 2-wire twisted pair, screw connectors

Communication cable, CS1/CQM1H/CPM2C peripheral port to PC 9-pin RS-232C port, 6 m

CompoNet master unit for CS-series

Digital input unit, 32 x 24 VDC inputs, NPN/PNP

Digital input unit, 96 x 24 VDC inputs, NPN/PNP

Digital output unit, 64 x transistor outputs, NPN, 0.3 A, 12-24 VDC

Digital output unit, 64 x transistor outputs, PNP with short circuit protection, 0.3 A, 24 VDC

Digital output unit, 96 x transistor outputs, NPN, 0.1 A, 12-24VDC

Serial communications board, 2 x RS-232C ports, supports protocol macro backup from memory card

Serial communications board, 1 x RS-232C port, 1 x RS422/485 port, supports protocol macro backup from memory card

CP2E series compact PLC - Network type; 36 DI, 24DO; Relay output; Power supply 220 VAC; 10 kStep Program memory

2 loops, Thermocouple/Pt100 input, PNP 2 Digital Outputs 24 VDC, 21mA/point, Heat or Cool control, Heater burnout alarm, Push-in Plus terminals

PLC, 24 VDC supply, 12 x 24 VDC inputs, 8 x NPN outputs 0.3 A, 5K steps program + 10K words data memory

Serial communications unit, 2 x RS-232C ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave