Measurement & Monitoring

MACX MCR-EX-SL-2NAM-T-SP - Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.

Temp. controller PRO,1/32 DIN (24x48mm), screwless terminals,1 AUX,1 x 12 VDC pulse OUT,RS-485,100-240 VAC

CM-SFS.22S Current monitoring relay 2c/o,B-C=0.3-15A RMS, 24-240VAC/DC

Temperature measuring transducer - MACX MCR-EX-RTD-I

Universally configurable frequency transducer for converting frequency (Hz/rpm) and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS 1033202. Screw connection technology.

100 to 240 V Alternating Current (AC) Supply Voltage Digital Temperature Controller

EMG 90-DIO 32M/LP - Lamp test module, 2 diodes with common cathode: with 16 pairs, with common triggering

Temp. controller, PRO, DIN Rail 22,5mm, Uni. I/P,1 x 12 VDC pulse OUT,No AUX,RS-485,No cov.,24VAC/DC

Temperature controller, 1/16DIN (48 x 48mm), relay output, Pt100 input, Light-Gray color, 100-240 VAC

Voltage measuring transducers - MACX MCR-VDC

MCR-SL-CUC-200-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 200 A input current, 4 ... 20 mA output

MINI MCR-2-POT-UI - Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Screw connection technology, standard configuration

24 V Alternating Current (AC)/Direct Current (DC) Supply Voltage Temperature Meter

Signal conditioner - MINI MCR-SL-U-I-0

100 to 240 V Alternating Current (AC) Supply Voltage Temperature Controller

Temperature controller, 1/16 DIN (48x48 mm), 12 VDC pulse output, 3 AUX, 2 Event input, Transfer output, 24 VAC/DC

MINI MCR-SL-R-UI - MCR potiposition transducer for conversion of potentiometer positions into a standard analog signal, 0 Ω input... 100 Ω to 0 kΩ ... 100 kΩ

Monitoring relay 22.5mm wide, simultanious monitoring of phase sequence and loss in 3phase 3wire systems, One DPDT

Temp. sensor, M6 type, Thermocouple K, 0-400 deg., SUS304, pre-wired, 1m

Signal conditioner - MINI MCR-2-I4-U