Industrial communication & Networking

Industrial Ethernet Switch - FL SWITCH SFNT 8TX-C

Industrial Ethernet Switch - FL SWITCH SFNT 6TX/2FX-C

Industrial Ethernet Switch - FL SWITCH SFNT 6TX/2FX ST-C

Industrial Ethernet Switch - FL SWITCH SFN 6TX/2FX

Industrial Ethernet Switch - FL SWITCH SFN 6TX/2FX ST

Industrial Ethernet Switch - FL SWITCH SFNT 14TX/2FX

GW PN/ASCII 2E/4DB9 - The GW PN/ASCII... converts RAW or ASCII serial strings into PROFINET. Includes two RJ45 ports and four D-SUB 9 ports.

GW PN/ASCII 2E/2DB9 - The GW PN/ASCII... converts RAW or ASCII serial strings into PROFINET. Includes two RJ45 ports and two D-SUB 9 ports.

GW PN/ASCII 1E/2DB9 - The GW PN/ASCII... converts RAW or ASCII serial strings into PROFINET. Includes one RJ45 port and two D-SUB 9 ports.

FB-8SP - Device coupler for Foundation Fieldbus and PROFIBUS PA with terminal connections for eight spurs connected to fieldbus end devices.

FL DIN-RAIL ADAPTER 22.5 - The FL DIN-RAIL ADAPTER 22.5 is designed to allow products 22.5 mm wide to be mounted flush to a standard 35 mm DIN rail, in any orientation.

FOC-KDHEAVY-1011/IP20/... - POF installation cable for assembly (IP20 heads only) for installation in stationary systems and machines with individual elements made of polyamide (PA), halogen-free, ozone and UV resistant, with a polyurethane (PUR) outer sheath

FL COUPLER SC-DUPLEX - Coupling, SC duplex/SC duplex, compatible with multi-mode and single mode glass fibers, PCF, and polymer fibers

PORT PWR 9PIN 232/422 CONV

RAD-AI4-U-IFS - Radioline - I/O extension module, 4 analog voltage inputs (0 ... 5 V, 0 ... 10 V)

GW PL HART4-R-BUS - Four-channel HART® expansion module, with screw connection, with 250 Ω internal input resistors

RAD-ADP-RSMA/M-RSMA/F-90 - Antenna adapter, frequency range: 0.3 GHz ... 6 GHz, connection: RSMA (male) -> RSMA (female), 90° angled

Industrial Ethernet Switch - FL SWITCH 1001-4POE-GT

GW PN/MODBUS 1E/1DB9 - The GW PN/MODBUS... enables two-way communication between PROFINET and Modbus protocols. Includes one RJ45 port and one D-SUB 9 port.

GW PN/DP 1E/1DB9 - PROFINET to PROFIBUS DP gateway. Functions as a PROFIBUS DP controller on the PROFIBUS network and a PROFINET IO device on the PROFINET network. Compatible with FDT/DTM container for simple configuration of PROFIBUS DP devices.