2905931
Official DistributorSKU
PHX2905931
MPN
TC-2KS40-AI16-EX2-PR-CSTM
Weight
0.1 kg
This product is Not Cancellable/Not Returnable
Series TC
TC-2KS40-AI16-EX2-PR-CSTM - Module carrier
Termination Carrier for connecting 16 MACX Analog Ex i signal conditioners with double output to analog input cards of the Yokogawa Stardom TM via two KS40 connectors, 40-pos. Suitable for Yokogawa card NFAI143.
- Mechanically decoupled, passive PCB
- Robust aluminum profile with integrated DIN rail
- Side parts with integrated end clamps
- Simple or redundant supply (decoupled from diode, protected against polarity reversal) and monitoring function implemented via separate DIN rail module
- Double system connection, 40-pos. (KS/AKB-compatible)
- Cable sets for signal connection are supplied as standard and do not have to be ordered separately
- The power/fault signaling module is not supplied as standard and must be ordered separately.
Technical Specifications
Notes
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Insulation characteristics
| Insulation | Basic insulation |
Insulation characteristics: Air clearances and creepage distances
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Max. permissible current | 1 A (Signal/channel) |
| Nominal voltage UN | < 50 V DC (Per signal/channel) |
Air clearances and creepage distances
| Rated Insulation Voltage | 50 V |
| Rated surge voltage | 0.5 kV |
Supported controller YOKOGAWA STARDOM
| Suitable I/O card | NFAI143 |
Supply
| Fuse | 2x 2.5 A on PCB, slow-blow (replaceable) |
| Input Current | ≤ 2 A |
| Redundant supply | yes, decoupled from diodes |
| Polarization and surge protection | Yes |
| Output name | Switching output |
| Contact switching type | 1 N/C contact (alarm = open) |
| Maximum Switching Voltage | 30 V DC (2 A) |
| Maximum Switching Voltage | 33 V AC (2 A) |
Power supply
| Connection Method | Screw connection |
| Stripping length | 7 mm |
| Number of Connections | 1 |
| Number of Positions | 6 |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Controller level
| Connection Method | Yokogawa KS-compatible |
| Number of Connections | 2 |
| Number of Positions | 40 |
Signaling
| Status display | 2x green LEDs (PWR1 and PWR2) |
Dimensions
| Width | 322 mm |
| Height | 170 mm |
| Depth | 160 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
Ambient conditions
| Degree of Protection | IP00 |
| Ambient Temperature (Operation) | -20 °C ... 70 °C (For use at an ambient temperature of up to 70°C: the MACX MCR-SL-RPSSI-2I modules must be mounted 5 mm apart. Use the CLIPFIX 35-5 end brackets provided as spacers.) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C (Please observe module specifications) |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Shock | 15g, according to IEC 60068-2-27 |
| Vibration (Operation) | 2g, according to IEC 60068-2-6 |
UL, USA/Canada
| Identification | UL 61010 Listed |
| Identification | Class I, Div. 2, Groups A, B, C, D T4 |
| Identification | Class I, Zone 2, Group IIC |
Air clearances and creepage distances
| Standards/regulations | DIN EN 50178 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | No end clamp |
| Mounting Position | vertical, horizontal |
Why Proax for Phoenix Contact 2905931?
Proax is an authorized distributor of Phoenix Contact 2905931 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 10 |
Recommended
TC-2KS40-AI16-M-PRH-CS - Termination Carrier for redundantly connecting 16 MINI Analog signal conditioners to analog input cards of the Yokogawa Centum VP controller, via KS40 connector, 40-pos. Suitable for Yokogawa AAI143 cards.
TC-2KS40-AO16-EX-PR-CS - Termination carrier for redundantly connecting 16 MACX Analog Ex i signal conditioners to analog output cards of the Yokogawa Centum VP controller, via two KS40 connectors, 40-pos. Suitable for Yokogawa card AAI543.
TC-2KS50-DI32-M-MR-CS - The TC-2KS50-DI32-M-MR-CS termination carrier is a compact solution which connects signal conditioners from the MINI Analog series to Yokogawa CS3000 digital input cards type ADV 151 and ADV 161.
TC-2KS50-DI32-2EX-PR-CS - Termination Carrier for redundantly connecting 16 two-channel MACX Analog Ex i NAMUR signal conditioners to digital input cards of the Yokogawa Centum VP controller, via two KS50 connectors, 50-pos. Suitable for Yokogawa ADV151 and ADV161 cards.
TC-2KS50-DO16-F&G-AR-RS - Termination carrier for redundantly connecting 16 PSR-ETP modules to digital output cards of the Yokogawa ProSafe-RS controller, via two KS50 connectors, 50-pos. Solution for Fire & Gas (F&G) applications. Suitable for Yokogawa SDV541 card.
TC-2KS50-DO32-EX-PR-CS - Termination Carrier for redundantly connecting 32 MACX Analog Ex i solenoid drivers to digital output cards of the Yokogawa Centum VP controller, via two KS50 connectors, 50-pos. Suitable for Yokogawa ADV551 and ADV561 cards.
