Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
FL MGUARD RS4000 TX/TX-P
Weight
0.869 kg
This product is Not Cancellable/Not Returnable

FL MGUARD RS4000 TX/TX-P - Router

Security appliance for process applications, 10/100 Mbps, NAT, firewall, 250 VPN tunnel, MODBUS inspector, OPC inspector

  • Central management tool
  • OPC inspector
  • Deep Packet Inspection
  • OPC firewall
  • Maximum security
  • Maximum performance
Technical Specifications

Dimensions

Width45 mm
Height130 mm
Depth120.6 mm

Material specifications

Colorsilver
Housing MaterialMetal

Ethernet

Connection MethodRJ45
Transmission Speed10/100 Mbps
Transmission physicsEthernet in RJ45 twisted pair
Transmission length100 m (per segment)
Signal LEDsSupply voltage, data transmission, error, link, activity
No. of channels2 (RJ45 ports)

Signal contact

Connection MethodPlug-in/screw connection via COMBICON
Additional textnot electrically isolated

VPN - release button

Connection Method24 V DC/250 mA can be connected as an option

Functionality

Basic FunctionsRouter with intelligent firewall and OPC/Modbus inspector, FW 8.5 or later: VPN for up to 250 tunnels, CIFS Integrity Monitoring, redundancy function, metal housing, slot for SD memory card, extended temperature range, high-performance firewall / VPN: up to 124 Mbps / 40 Mbps

System requirements

Supported browsersHTTPS support required

Product properties

TypeStand-Alone

Insulation characteristics

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Security functions

1:1 Network Address Translation (NAT) in the VPNSupported
Number of VPN tunnels250 (Firmware 8.5 or later)
AuthenticationX.509v3 certificates with RSA or PSK
Data integrityMD5, SHA-1, SHA 256, SHA-512
Dynamic Host Configuration Protocol (DHCP) supportServer or Relay Agent
FilteringMAC and IP addresses, ports, protocols
Firewall data throughputmax. 124 Mbps (Router mode, default firewall rules, bidirectional throughput)
Firewall data throughputmax. 61 Mbps (Stealth mode, default firewall rules, bidirectional throughput)
Firewall rulesConfigurable stateful inspection firewall with full scope of functions, deep packet inspection for OPC classic
Basic FunctionsRouter with intelligent firewall and OPC/Modbus inspector, FW 8.5 or later: VPN for up to 250 tunnels, CIFS Integrity Monitoring, redundancy function, metal housing, slot for SD memory card, extended temperature range, high-performance firewall / VPN: up to 124 Mbps / 40 Mbps
Internet Protocol Security (IPsec) modeESP tunnel / ESP transport
Link Layer Discovery Protocol (LLDP)As per protocol 802.2
Network Time Protocol (NTP) clientClient
Remote Syslog Loggingon externals server
RoutingStandard routing, NAT, 1:1-NAT, port forwarding
Protection againstIP spoofing, DoS and Syn Flood Protection
Encryption methodsDES, 3DES, AES-128, -192, -256
Virtual private network (VPN) throughputmax. 40 Mbps (Router mode, VPN bidirectional throughput)
Virtual private network (VPN) throughputmax. 27 Mbps (Stealth mode, VPN bidirectional throughput)

Electrical properties

Local diagnosticsP1, P2 Supply voltage US1, US2 Green LED
Local diagnosticsOne LED per port Link active Green LED
Maximum power dissipation for nominal condition2.4 W

Supply

Supply voltage (DC)24 V DC (redundant)
Supply Voltage Range11 V DC ... 36 V DC
Power supply connectionVia COMBICON, max. conductor cross section 2.5 mm²
Residual ripple3.6 VPP (within the permitted voltage range)
Max. current consumption0.24 A
Typical current consumption100 mA (at US = 24 V DC)

Function

Signal contact control voltage24 V DC (typical)
Signal contact control current250 mA (short-circuit-proof)

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 70 °C
Permissible humidity (operation)5 % ... 95 % (5% ... 95% relative humidity, temporary condensation in accordance with Class 3K7 / IEC EN 60721-3-3 (except for wind-driven precipitation and ice buildup))

Conformity/Approvals

ConformanceCE-compliant
IECExEx nA IIC T4 Gc

Mounting

Mounting TypeDIN rail mounting

EMC data

Conformance with EMC directivesIEC 61000-6-2 IEC 61000-4-2 (ESD) 6 kV contact discharge, 8 kV air discharge
Conformance with EMC directivesIEC 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) 10 V/m (80 MHz ... 2000 MHz)
Conformance with EMC directivesIEC 61000-6-2 IEC 61000-4-4 (burst) 2 kV power line, 1kV data line
Conformance with EMC directivesIEC 61000-6-2 IEC 61000-4-5 (surge) power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
Conformance with EMC directivesIEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) 3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz)
Noise immunityEN 61000-6-2:2005
Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Noise emissionEN 55022 / Class B

Signaling

Status displayLEDs:P1, P2, Fault, State, Error, LAN, WAN
Accessories

Why Proax for Phoenix Contact 2702259?

Proax is an authorized distributor of Phoenix Contact 2702259 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Available for order

Phoenix Contact Availability