Proax
CADEN
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2702409
AllMeasurement & MonitoringMonitoring ProductsRemote control

2702409

Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
PHX2702409
MPN
TC EXTENDER 2001 ETH-2S
Weight
0.268 kg

TC EXTENDER 2001 ETH-2S - Ethernet extenders

Second generation: Unmanaged Ethernet extender for point-to-point connections, line and ring structures, data rates up to 30 Mbps, distances of up to 20 km on in-house copper cables, diagnostics via USB and LEDs, 2 SHDSL ports, 1 LAN port

  • Distances up to 20 km
  • Up to 15.3 Mbps in 2-wire operation
  • Up to 30 Mbps in 4-wire operation
  • Robust modulation method (SHDSL)
  • Automatic SHDSL data rate detection
  • Transparent transmission of all standard Ethernet protocols, including EtherNet/IP™, Modbus/TCP, PROFINET, PROFIsafe, EtherCAT®, KNX, BACnet/IP
  • Network transparent (no IP configuration required)
  • Automatic detection of network cable type (auto MDI(X))
  • Automatic network data rate detection (10/100 Mbps)
  • Easy startup, plug and play
  • Future proof (IPv4 and IPv6-compatible)
  • 2 digital outputs for alerting external controllers
Technical Specifications

Utilization restriction

CCCex noteUse in potentially explosive areas is not permitted in China.

Product properties

MTTF711 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
MTTF308 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
MTTF125 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

Functionality

Basic FunctionsEthernet extenders in accordance with ITU-T G.991.2

Electrical properties

Electrical isolationVCC // Ethernet // DSL (A) // DSL (B) // FE
Maximum power dissipation for nominal condition4.32 W
Mains typePermanent line
Test voltage data interface/power supply500 V AC (In accordance with EN/IEC 60079-7)
Test voltage data interface/power supply1.5 kV AC (50 Hz, 1 min.)

Supply

Supply Voltage Range18 V DC ... 30 V DC
Nominal Supply Voltage24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply)
Nominal Supply Voltage5 V DC (configuration only, via mini-USB type B)
Typical current consumption< 180 mA (24 V DC)
Max. current consumption≤ 2 A (For operation in a joining station, via the DIN rail connector)

Function

Status and diagnostic indicatorsLEDs: US (supply voltage), ACT/LINK (Ethernet data traffic), ERR (errors)2x LINK / 2x STAT (DSL data traffic port A and port B), DIAG (diagnostic messages)

Signal

Output nameDigital output
Number of Outputs2
Voltage output signal18 V DC ... 30 V DC (depending on the operating voltage)
Current Output Signal≤ 150 mA (Short-circuit-proof)
Behavior of outputsDeactivated for device supply via DIN rail connector

Supply

Connection MethodCOMBICON plug-in screw terminal block
Tightening torque0.56 Nm ... 0.79 Nm

Interfaces

SignalEthernet
Basic FunctionsEthernet extenders in accordance with ITU-T G.991.2

Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3

Serial transmission speed10/100 Mbps, auto negotiation
Connection MethodRJ45 jack, shielded
Connection Method1 port 10/100Base-T(X), auto negotiation
No. of channels1
Transmission length< 100 m (shielded twisted pair)
Protocols SupportedProtocol-transparent for TCP/IP, IPv4, and IPv6

Data: SHDSL interface according to ITU-T G.991.2.bis

Serial transmission speed4-wire operation: 64 kbps ... 30 Mbps
Serial transmission speed2-wire operation: 32 kbps ... 15.3 Mbps
Connection Method2 x 2-pos. COMBICON plug-in screw terminal blocks
No. of channels2 (2-wire operation)
Tightening torque0.56 Nm ... 0.79 Nm
Transmission length< 20 km (Depending on data rate and cable cross section)
Single conductor/terminal point, rigid0.2 mm² ... 2.5 mm²
Single-wire/terminal point, flexible0.2 mm² ... 2.5 mm²
Max. AWG conductor cross section, flexible14
Min. AWG conductor cross section, flexible24
Single-wire/terminal point, rigid AWG max.14
Single-wire/terminal point, rigid AWG min.24
Stripping length7 mm

Data: USB 2.0

Connection MethodMini-USB type B, 5-pos.
Transmission length< 5 m (only for configuration and diagnostics)

Dimensions

Width35 mm
Height99 mm
Depth114.5 mm

Material specifications

Color (Housing)gray (RAL 7042)
Material (Housing)PA 6.6-FR

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-20 °C ... 60 °C (Freestanding (40 mm spacing to the right and left), no supply of other modules via the device)
Ambient Temperature (Operation)-20 °C ... 55 °C (Mounted in rows with zero spacing and low power dissipation of aligned modules)
Ambient Temperature (Operation)-20 °C ... 50 °C (Mounted in rows with zero spacing)
Ambient Temperature (Operation)-20 °C ... 45 °C (aligned without spacing and supply of other modules via the device, 1.5 A)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Altitude≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)

CE

CertificateCE-compliant

ATEX

Identification II 3 G Ex ec IIC T4 Gc
CertificatePxCIF11ATEX2313643X
NotePlease follow the special installation instructions in the documentation!

UKEX

Identification II 3 G Ex ec IIC T4 Gc
CertificatePxCIMA22UKEX2313643X

UL, USA/Canada

Identification508 Listed

Corrosive gas test

IdentificationISA-S71.04-1985 G3 Harsh Group A

EMC data

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Electrostatic discharge

Standards/regulationsEN 61000-4-2
Contact discharge± 6 kV
Discharge in air± 8 kV
Indirect discharge± 6 kV
CommentsCriterion B

Electromagnetic HF field

Standards/regulationsEN 61000-4-3
Frequency Range80 MHz ... 3 GHz
Field intensity10 V/m
CommentsCriterion A

Fast transients (burst)

Standards/regulationsEN 61000-4-4
Input± 2 kV
Signal± 2 kV
CommentsCriterion B

Surge current load (surge)

Standards/regulationsEN 61000-4-5
Input± 0.5 kV (sym./asym.)
Output± 1 kV (asymmetrical, unshielded)
Signal± 1 kV (asymmetrical, shielded Ethernet cable)
Signal± 1 kV (asymmetrical: line to ground, unshielded SHDSL cable)
CommentsCriterion A

Conducted interference

Standards/regulationsEN 61000-4-6
Frequency Range0.15 MHz ... 80 MHz
CommentsCriterion A
Voltage10 V

Emitted interference

Standards/regulationsEN 55011
CommentsClass A, industrial applications

Criteria

Criterion ANormal operating behavior within the specified limits.
Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

Standards and Regulations

Standards/regulationsEN 50121-4

Mounting

Mounting TypeDIN rail: 35 mm
Assembly instructionsThe product can be snapped onto all 35 mm DIN rails in accordance with EN 60715.
Accessories
  • Phoenix Contact2866983
    2866983
    Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5
  • Phoenix Contact2709561
    2709561
    ME 17,5 TBUS 1,5/ 5-ST-3,81 GN - DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
  • Phoenix Contact2801593
    2801593
    Surge protection device - DT-TELE-SHDSL
  • Phoenix Contact2986135
    2986135
    USB cable - CABLE-USB/MINI-USB-3,0M
  • Phoenix Contact2891246
    2891246
    Port Guard Security Element - FL PATCH SAFE CLIP
  • Phoenix Contact2832263
    2832263
    Patch cable - FL CAT5 PATCH 0,5
  • Phoenix Contact2832580
    2832580
    FL CAT5 PATCH 5,0 - Patch cable, CAT5, assembled, 5 m
  • Phoenix Contact2744827
    2744827
    FL CAT5 HEAVY CONF/ - CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installation cable, 2 x 2 x 0.22 mm2, solid conductor, shielded, outer sheath: 7.8 mm diameter, inner sheath: 5.75 mm ± 0.15 mm diameter, preassembled on both sides with RJ45 plug, crossover or line
  • Phoenix Contact3062786
    3062786
    Shield connection clamp - SKS 8-SNS35
  • Phoenix Contact2702255
    2702255
    Modem - TC EXTENDER 6004 ETH-2S
  • Phoenix Contact2702253
    2702253
    TC EXTENDER 4001 ETH-1S - Managed Ethernet extender, point-to-point connections, data rates up to 15.3 Mbps, distances of up to 20 km on in-house copper cables, replaceable surge protection, 1 SHDSL port, 1 LAN port, diagnostics via Ethernet
  • Phoenix Contact1656725
    1656725
    VS-08-RJ45-5-Q/IP20 - RJ45 connector, design: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5, material: Plastic, connection method: Insulation displacement connection, connection cross section: AWG 26- 23, cable outlet: straight, color: traffic grey A RAL 7042, Ethernet

Why Proax for Phoenix Contact 2702409?

Proax is an authorized distributor of Phoenix Contact 2702409 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Recommended
  • Phoenix Contact2702253
    2702253
    TC EXTENDER 4001 ETH-1S - Managed Ethernet extender, point-to-point connections, data rates up to 15.3 Mbps, distances of up to 20 km on in-house copper cables, replaceable surge protection, 1 SHDSL port, 1 LAN port, diagnostics via Ethernet
  • Phoenix Contact2702255
    2702255
    Modem - TC EXTENDER 6004 ETH-2S
  • Phoenix Contact2702781
    2702781
    TC EXTENDER ETH TESTSET - Ethernet extenders
  • Phoenix Contact2702258
    2702258
    Surge protection plug - TC EXTENDER PT-IQ-2S
  • Phoenix Contact2702257
    2702257
    Surge protection plug - TC EXTENDER PT-IQ-1S

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability