Name: 1110043
Brand: Phoenix Contact
SKU: PHX1110043
Price: 393.0000 CAD
Availability: InStock

Official Distributor

By Phoenix Contact

SKU

MPN

UNO2-PS/1AC/24DC/960W

Series UNO2-PS

UNO2-PS/1AC/24DC/960W - Power supply unit

Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 40 A, adjustable from 24 V DC ... 28 V DC

Save energy, thanks to a high degree of efficiency
Outdoor installation possible, with a wide temperature range of -25°C … +70°C
Simple output voltage monitoring, thanks to the floating DC OK relay contact

Technical Specifications

AC operation

Supply system configuration	Star network (TN, TT, IT (PE))
Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	100 V AC ... 240 V AC -15 % ... +10 %
Input voltage range	110 V AC ... 240 V AC ±10 % (UL)
Derating	< 99 V AC (1 %/V)
Typical national grid voltage	120 V AC
Typical national grid voltage	230 V AC
Voltage type of supply voltage	AC
Inrush Current	typ. 15 A (at 25 °C)
Inrush current integral (I²t)	< 0.5 A2s
Frequency range (f_N)	50 Hz ... 60 Hz ±10 %
Mains buffering time	typ. 17 ms (120 V AC)
Mains buffering time	typ. 23 ms (230 V AC)
Current consumption	10.5 A (100 V AC)
Current consumption	9 A (120 V AC)
Current consumption	4.7 A (230 V AC)
Current consumption	4.5 A (240 V AC)
Current consumption	9.5 A (110 V AC (UL))
Current consumption	4.5 A (240 V AC (UL))
Protective circuit	Transient surge protection; Varistor, gas-filled surge arrester
Switch-on time	typ. 1 s
Device mains fuse	20 A internal (device protection), slow-blow
Recommended breaker for input protection	10 A ... 16 A (Characteristic B, C, D, K or comparable)
Discharge current to PE	< 3.5 mA

Output data

Efficiency	typ. 93.6 % (120 V AC)
Efficiency	typ. 94.8 % (230 V AC)
Nominal Output Voltage	24 V DC
Setting range of the output voltage (U_Set)	24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (I_N)	40 A
Short-circuit-proof	yes
No-load proof	yes
Derating	55 °C ... 70 °C
Crest factor	typ. 1.6 (120 V AC)
Crest factor	typ. 1.6 (230 V AC)
Output power (P_N)	960 W
Connection in parallel	yes, for redundancy
Connection in series	yes, for increased output voltage
Feedback voltage resistance	≤ 35 V DC
Protection against overvoltage at the output (OVP)	≤ 35 V DC
Residual ripple	typ. 150 mVPP (with nominal values)
Control deviation	< 1 % (change in load, static 10 % ... 90 %)
Control deviation	< 3 % (change in load, dynamic 10 % ... 90 %)
Control deviation	< 0.1 % (change in input voltage ±10 %)
Rise time	< 1 s (UOut = 10 % ... 90 %)
Minimum no-load power dissipation	< 5 W (120 V AC)
Maximum no-load power dissipation	< 4 W (230 V AC)
Minimum nominal load power dissipation	< 67 W (120 V AC)
Power loss nominal load max.	< 53 W (230 V AC)

Signal relay 13/14

Connection level	3.x
Connection labeling	3.1 (13), 3.2 (14)
Switch contact (floating)	OptoMOS
Switching voltage	max. 30 V AC/DC
Switching voltage	max. 60 V DC
Current carrying capacity	max. 50 mA
State condition	DC OK (UOut > 0,9 x UN) (Contact closed)
State condition	UOUT < 0,9 x UN (Contact open)

Input

Position	1.x
Identification	1.1 (), 1.2 (L), 1.3 (N)

Conductor connection

Connection Method	Screw connection
rigid	0.2 mm² ... 6 mm²
flexible	0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 4 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 4 mm²
rigid (AWG)	24 ... 10 (Cu)
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque	4 lbf-in. ... 5 lbf-in.
Drive form screw head	Slotted L

Output

Position	2.x
Identification	2.1, 2.2 (+), 2.3, 2.4 (-)

Conductor connection

Connection Method	Screw connection
rigid	0.5 mm² ... 16 mm²
flexible	0.5 mm² ... 16 mm²
flexible with ferrule without plastic sleeve	0.5 mm² ... 16 mm²
flexible with ferrule with plastic sleeve	0.5 mm² ... 16 mm²
rigid (AWG)	20 ... 6 (Cu)
Stripping length	10 mm
Tightening torque	1.2 Nm ... 1.5 Nm
Tightening torque	10 lbf-in. ... 13 lbf-in.
Drive form screw head	Slotted L

Signal

Position	3.x
Identification	3.1 (13), 3.2 (14)

Conductor connection

Connection Method	Screw connection
rigid	0.5 mm² ... 16 mm²
flexible	0.5 mm² ... 16 mm²
flexible with ferrule without plastic sleeve	0.5 mm² ... 16 mm²
flexible with ferrule with plastic sleeve	0.5 mm² ... 16 mm²
rigid (AWG)	20 ... 6 (Cu)
Stripping length	10 mm
Tightening torque	1.2 Nm ... 1.5 Nm
Tightening torque	10 lbf-in. ... 13 lbf-in.
Drive form screw head	Slotted L

LED signaling

Types of signaling	LED DC OK – signal state operation (UN = 24 V DC, IOut = IN)
Function	Visual operating state display
Color	green
LED off	Supply voltage input AC not present (Off)
LED on (green), DC OK	UOUT > 0,9 x UN (On (green), DC OK)
LED on (flashing green) DC OK < 0.9 x UN	UOUT < 0,9 x UN (on (flashing green))

Electrical properties

Number of phases	1.00
Insulation voltage input/output	4 kV AC (type test)
Insulation voltage input/output	3 kV AC (routine test)
Insulation voltage input / PE	3.5 kV AC (type test)
Insulation voltage input / PE	2.4 kV AC (routine test)

Product properties

Product family	UNO POWER
MTBF (IEC 61709, SN 29500)	> 900000 h (25 °C)
MTBF (IEC 61709, SN 29500)	> 530000 h (40 °C)
MTBF (IEC 61709, SN 29500)	> 280000 h (55 °C)
Environmental protection directive	RoHS Directive 2011/65/EU
Environmental protection directive	WEEE
Environmental protection directive	Reach

Insulation characteristics

Protection class	I
Degree of pollution	2

Item dimensions

Width	126 mm
Height	130 mm
Depth	129 mm
Depth	125 mm (Device depth (DIN rail mounting))

Installation dimensions

Installation distance right/left (active, passive)	15 mm / 15 mm (POut ≥50% )
Installation distance top/bottom (active, passive)	30 mm / 30 mm (POut ≥50% )

Mounting

Mounting Type	DIN rail mounting
Assembly instructions	alignable: 0 mm horizontally, 30 mm vertically
Mounting Position	horizontal DIN rail NS 35, EN 60715
With protective coating	No

Material specifications

Flammability rating according to UL 94	V0 (Housing, terminal blocks)
Housing Material	Metal
Housing Material	Aluminum (AlMg3) / sheet steel, zinc-plated
Hood version	Stainless steel
Side element version	Aluminum
Foot latch material	Sheet steel, zinc-plated

Ambient conditions

Degree of Protection	IP20
Ambient Temperature (Operation)	-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (start-up type tested)	-40 °C
Maximum altitude	≤ 3000 m (> 2000 m, Derating: 10 %/1000 m)
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Shock (operation)	18 ms, 30g, per spatial direction (IEC 60068-2-27)
Vibration (Operation)	< 13.2 Hz, amplitude ±1.0 mm (according to IEC 60068-2-6)
Vibration (Operation)	5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)

Overvoltage category

EN 61010-1	II (≤ 3000 m)
EN 62477-1	III (≤3000 m)

Safety of power supply units up to 1100 V (insulation distances)

Standard designation	Safety of power supply units up to 1100 V (insulation distances)
Standards/specifications	DIN EN 61558-2-16

Electrical safety

Standard designation	Electrical safety
Standards/specifications	IEC 61010-2-201 (SELV)

Electronic equipment for use in power installations

Standard designation	Equipping high voltage installations with electronic equipment
Standards/specifications	EN 50178/VDE 0160 (PELV)

Safety for measurement, control, and laboratory equipment

Standard designation	Safety for equipment for measurement, control, and laboratory use
Standards/specifications	IEC 61010-1

Protective extra-low voltage

Standard designation	Protective extra-low voltage
Standards/specifications	IEC 61010-1 (SELV)
Standards/specifications	IEC 61010-2-201 (PELV)

Safe isolation

Standard designation	Safe isolation
Standards/specifications	IEC 61558-2-16
Standards/specifications	IEC 61010-2-201

Limitation of harmonic line currents

Standard designation	Limitation of harmonic line currents
Standards/specifications	EN 61000-3-2

Mains voltage dips

Standard designation	Requirement of the semiconductor industry with regard to mains voltage dips
Standards/specifications	SEMI F47 - 0706 (200 V AC)

UL

Identification	UL/C-UL Listed UL 61010-1
Identification	UL/C-UL Listed UL 61010-2-201
Identification	UL/C-UL Listed ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location)

SIQ

Identification

CB scheme (IEC 61010-1, IEC 61010-2-201)

EMC data

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial)
EMC requirements for noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 55016
Conducted noise emission	EN 61000-6-3 (Class B)
Noise emission	EN 55016
Noise emission	EN 61000-6-3 (Class B)

Harmonic currents

Standards/regulations	EN 61000-3-2
Standards/regulations	EN 61000-3-2 (Class A)
Frequency Range	0 kHz ... 2 kHz

Flicker

Standards/regulations	EN 61000-3-3
Frequency Range	0 kHz ... 2 kHz

Electrostatic discharge

Standards/regulations	EN 61000-4-2
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion A

Electromagnetic HF field

Standards/regulations	EN 61000-4-3
Frequency Range	80 MHz ... 1 GHz
Test field strength	10 V/m (Test Level 3)
Frequency Range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A

Fast transients (burst)

Standards/regulations	EN 61000-4-4
Input	4 kV (Test Level 4 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Comments	Criterion A

Surge voltage load (surge)

Standards/regulations	EN 61000-4-5
Input	1 kV (Test Level 3 - symmetrical)
Input	2 kV (Test Level 3 - asymmetrical)
Output	0.5 kV (Test Level 2 - symmetrical)
Output	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B

Conducted interference

Standards/regulations	EN 61000-4-6
Input/Output	asymmetrical
Frequency Range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)

Voltage dips

Standards/regulations	EN 61000-4-11
Voltage	230 V AC
Frequency	50 Hz
Voltage dip	70 %
Number of periods	25 / 30 periods
Comments	Criterion A
Voltage dip	40 %
Number of periods	12 periods
Additional text	Test Level 2
Comments	Criterion A
Voltage dip	0 %
Number of periods	1 period
Additional text	Test Level 2
Comments	Criterion B

Criteria

Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

Why Proax for Phoenix Contact 1110043?

Proax is an authorized distributor of Phoenix Contact 1110043 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time

Highly Trained Staff

Live Chat

Technical Support

Local Inventory

60+ Years Experience

Additional Information

Pack Size

Recommended

2910105
Power supply unit - UNO2-PS/1AC/24DC/480W
1096432
Power supply unit - UNO2-PS/1AC/24DC/240W
1110466
1110466 - Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 24 V DC ... 28 V DC
1110155
Alimentation à découpage primaire, UNO POWER, Raccordement vissé, Montage sur rail DIN, entrée: 1 phasée, sortie : 48 V DC / 5 A, réglable de 42 V DC ... 56 V DC

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability