Official DistributorSKU
MPN
NEARFI D ETH B
Weight
0.526 kg
This product is Not Cancellable/Not Returnable
NEARFI D ETH B - Inductive coupler
NearFi base, contactless real-time Ethernet coupler, 100 Mbps, range ≤40 mm, M12 screw connection, IP65, can be combined with NEARFI D ETH R. Incompatible with NEARFI 2000 (new)
- Contactless - and therefore no wear and no maintenance
- Protocol-independent, latency-free Ethernet real-time communication with 100 Mbps (full duplex)
- All-round visible diagnostics with light ring on the housing
- High degree of mounting freedom with flexible proximity options
- Plug and Play - as easy as a plug
- Degree of protection IP65
Documents
Technical Specifications
Note on application
| Note on application | Only for industrial use |
Product properties
| Application | Ethernet |
| MTTF | 239 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 155 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
| MTTF | 81 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Maximum power dissipation for nominal condition | 4.68 W |
Supply
| Supply Voltage Range | 19 V DC ... 30 V DC |
| Typical current consumption | ≤ 195 mA (at 24 V DC, at 25 °C) |
| Inrush Current | ≤ 0.25 A (20 ms at 24 V DC, without remote coupler) |
| Protective circuit | Transient protection, polarity protection |
| Connection Method | M12 male, A-coded |
Data: Ethernet interface, 100Base-T(X) in accordance with IEEE 802.3
| Transmission Speed | 100 Mbps |
| Connection Method | M12 female, D-coded |
| Note on the connection method | Auto negotiation and autocrossing, fast startup (FSU, <500 ms) |
| Note on the connection method | Typical bit error rate ≤10-12 |
| No. of channels | 1 |
| Transmission length | 100 m (shielded twisted pair) |
| Transmission medium | Copper |
| Protocols Supported | Protocol transparent: PROFINET, PROFINET IRT, PROFIsafe, EtherCAT®, Modbus/TCP, Powerlink, TSN, etc. |
Inductive
| Switch-on time | < 450 ms (ETH Full Duplex operating mode) |
| Range | min. 0 mm |
| Range | ≤ 20 mm (at 65°C) |
| Range | ≤ 40 mm (at 25 °C) |
| Center offset | ± 20 mm |
| Wireless modules that can be connected | 1 (Remote coupler) |
Wireless
| Wireless modules that can be connected | 1 (Remote coupler) |
| Frequency | 60 GHz |
| Frequency Range | 57 GHz ... 64 GHz (Data transmission) |
| Transmission power | < 10 mW (EIRP) |
| Delay time | ≤ 1 µs (typical) |
Dimensions
| Width | 80 mm |
| Height | 86 mm |
| Depth | 39 mm |
Material specifications
| Color (Housing) | black (RAL 9005) |
| Material (Enclosure) | PBT |
| Material (Enclosure) | Die-cast zinc |
| Flammability rating according to UL 94 | V0 |
Cable/line
| Other resistance | Resistant to welding splashes |
Mechanical tests
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | : 5 g per spatial direction, 10 Hz ... 150 Hz, amplitude ±0.34 mm |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | : 30 g, 11 ms duration, half-sine shock pulse, three shocks per spatial direction |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | : 10 g, 16 ms duration, half-sine shock pulse, 1,000 shocks per spatial direction |
Ambient conditions
| Degree of Protection | IP65 (Manufacturer's declaration) |
| Impact strength | IK06 |
| Ambient Temperature (Operation) | -20 °C ... 65 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | 2000 m |
| Permissible humidity (operation) | 10 % ... 95 % |
| Permissible humidity (storage/transport) | 10 % ... 95 % |
| Air pressure (operation) | 80 kPa ... 108 kPa (up to 2000 m above sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
CE
| Certificate | CE-compliant |
Wireless approval, Europe
| Note | RED 2014/53/EU |
UL, USA
| Identification | UL 61010 Listed |
| Identification | UL 61010-2-201, 2nd Edition |
| Identification | UL 61010-1, 3rd Edition |
| Certificate | E238705 |
UL, Canada
| Identification | cUL 61010 Listed |
| Identification | CSA C22.2 NO. 61010-2-201:18, 2nd Edition |
| Identification | CSA C22.2 NO. 61010-1, 3rd Edition |
| Certificate | E238705 |
Wireless approval USA, FCC
| Certificate | YG3DETHB |
Wireless approval Canada, IC
| Certificate | 4720B-DETHB |
Wireless approval Japan, MIC
| Identification | 006-001056 |
KC approval for South Korea
| Certificate | R-R-PCK-1234232 |
CC-Link IE TSN
| Identification | Class A |
EMC data
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Conducted noise emission | EN 55032 Class A, industrial applications |
Electrostatic discharge
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | ± 4 kV (Test Level 2) |
| Discharge in air | ± 8 kV (Test Level 3) |
| Comments | Criterion B |
Electromagnetic HF field
| Standards/regulations | EN 61000-4-3 |
| Frequency Range | 80 MHz ... 1 GHz (Test Level 3) |
| Field intensity | 10 V/m |
| Comments | Criterion A |
Fast transients (burst)
| Standards/regulations | EN 61000-4-4 |
| Input | ± 2 kV (Test Level 3 - asymmetrical) |
| Output | ± 2 kV (Test Level 3 - asymmetrical) |
| Signal | ± 2 kV (Test Level 3 - asymmetrical) |
| Comments | Criterion B |
Surge current load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | ± 0.5 kV (Test Level 1 - symmetrical) |
| Input | ± 1 kV (Test Level 2 - asymmetrical) |
| Output | ± 1 kV (Test Level 2 - asymmetrical) |
| Signal | ± 1 kV (Test Level 2 - asymmetrical) |
| Comments | Criterion B |
Conducted interference
| Standards/regulations | EN 61000-4-6 |
| Frequency Range | 0.15 MHz ... 80 MHz (Test Level 3 - asymmetrical) |
| Comments | Criterion A |
| Voltage | 10 V (80% amplitude modulation with 1 kHz) |
Emitted interference
| Standards/regulations | EN 55016-2-3 |
| Comments | Class A, industrial applications |
Criteria
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Standards and Regulations
| Free from substances that could impair the application of coating | VDMA 24364:2018-05 |
| Other resistance | Resistant to welding splashes |
| Standards/regulations | EN 60204-1 (PELV) |
| Standard designation | Protective extra-low voltage |
Mounting
| Mounting Type | Panel mounting |
| Assembly note | Observe derating |
| Mounting Position | any |
Why Proax for Phoenix Contact 1234232?
Proax is an authorized distributor of Phoenix Contact 1234232 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
NearFi base, contactless real-time Ethernet coupler, 100 Mbps, range ≤40 mm, M12 screw connection, IP65, can be combined with NEARFI D ETH R. Incompatible with NEARFI 2000 (new)
NearFi base, contactless power coupler, 50 W (US), range ≤10 mm, M12 screw connection, IP65, can be combined with NEARFI P 2A R. Incompatible with NEARFI 200 (new)
NearFi remote, contactless power coupler, 50 W (US), range ≤10 mm, M12 screw connection, IP65, can be combined with NEARFI P 2A B. Incompatible with NEARFI 200 (new)- NearFi base, contactless power and real-time Ethernet coupler, 50 W (US), 100 Mbps, range ≤10 mm, M12 screw connection, IP65, can be combined with NEARFI PD 2A ETH R. Incompatible with NEARFI 2200 (new)
NearFi remote, contactless power and real-time Ethernet coupler, 50 W (US), 100 Mbps, range ≤10 mm, M12 screw connection, IP65, can be combined with NEARFI PD 2A ETH B. Incompatible with NEARFI 2200 (new)