The figure shows the standard item
Official DistributorSKU
MPN
ILB PN 24 DI16 DIO16-EF
Weight
0.564 kg
Series ILB-PN
ILB PN 24 DI16 DIO16-EF - I/O module
Inline, Block IO, PROFINET, RJ45 jack, Digital inputs: 32 (16 fixed and 16 freely selectable), 24 V DC, connection technology: 3-conductor, Digital outputs: 16, 24 V DC, connection technology: 2-conductor, PROFINET, -IRT, -MRP, -Fast Startup, degree of protection: IP20, including Inline connector
- 16/32 inputs, 24 V DC
- 16 outputs, 24 V DC, 500 mA
- 2 RJ45 jacks at a 45° angle
Technical Specifications
Dimensions
| Width | 156 mm |
| Height | 141 mm |
| Depth | 57 mm |
| Note on dimensions | Specfications with connectors |
PROFINET
| No. of channels | 2 |
| Connection Method | RJ45 jack |
| Note on the connection method | Autonegotiation and autocrossing, X2: internally crossed to enable “Fast Startup” with patch cable |
| Designation connection point | X1, X2 |
| Transmission Speed | 100 Mbps (acc. to PROFINET standard) |
| Transmission physics | Ethernet in RJ45 twisted pair |
| Device function | PROFINET device |
| Specification | Version 2.3 |
| Update rate | min. 1 ms (up to max. 512 ms, adjustable) |
| Conformance class | C |
Digital:
| Input name | Digital inputs |
| Description of the input | EN 61131-2 types 1 and 3 |
| Number of Inputs | 32 (16 fixed and 16 freely selectable) |
| Connection Method | Inline connector |
| Connection technology | 3-conductor |
| Input Voltage | 24 V DC |
| Input voltage range "0" signal | -3 V DC ... 5 V DC |
| Input voltage range "1" signal | 11 V DC ... 30 V DC |
| Nominal input voltage UIN | 24 V DC |
| Nominal input current at UIN | approx. 2.4 mA |
| Typical input current per channel | typ. 5 mA |
| Typical response time | approx. 500 µs |
| Output name | Digital outputs |
| Connection Method | Inline connector |
| Connection technology | 2-conductor |
| Number of Outputs | 16 |
| Protective circuit | Short-circuit and overload protection; Free-wheeling diode, integrated per channel |
| Output Voltage | 24 V DC -1 V (At nominal current) |
| Limitation of the voltage induced on circuit interruption | -25.8 V ... -15 V |
| Maximum Output Current per channel | 500 mA |
| Maximum Output Current per module | 8 A |
| Nominal Output Voltage | 24 V DC |
| Output current when switched off | max. 300 µA (When not loaded, a voltage can be measured even at an output that is not set.) |
| Nominal load, inductive | 12 VA (1.2 H, 48 Ω) |
| Nominal load, lamp | 12 W |
| Nominal load, ohmic | 12 W (48 Ω) |
| Reverse voltage resistance to short pulses | limited protection up to 0.5 A for 1 s |
| Behavior with overload | Auto restart |
| Behavior with inductive overload | Output can be destroyed |
| Behavior at voltage switch-off | The output follows the power supply without delay |
| Overcurrent shut-down | as of 0.7 A |
Product properties
| Product family | Inline |
| Type | Block design |
| Scope of delivery | including Inline connector |
| Special Properties | PROFINET, -IRT, -MRP, -Fast Startup |
| Diagnostics messages | Short-circuit or overload of the digital outputs Message in the diagnostics register |
| Diagnostics messages | Short circuit sensor supply US1 or US2 Message in the diagnostics register |
| Diagnostics messages | Sensor supply US1 not present Message in the diagnostics register |
| Diagnostics messages | Sensor supply US2 not present Message in the diagnostics register |
Insulation characteristics
| Overvoltage category | II |
Supply:
| Designation | Logic (UL) |
| Connection Method | Inline connector |
| Supply Voltage | 24 V DC |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current consumption | max. 75 mA |
| Designation | Sensor supply (US1, US2) |
| Connection Method | Inline connector |
| Supply Voltage | 24 V DC |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current consumption | max. 4 A (max. 2 A from US1 and 2 A from US2) |
| Designation | Actuator supply (UA1, UA2) |
| Connection Method | Inline connector |
| Supply Voltage | 24 V DC |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current consumption | max. 8 A (max. 4 A from UA1 and 4 A from UA2) |
Electrical isolation/isolation of the voltage ranges
| Test voltage: I/Os / logic | 500 V AC, 50 Hz, 1 min. |
| Test voltage: I/O/functional ground | 500 V AC, 50 Hz, 1 min. |
| Test voltage: Logic/functional ground | 500 V AC, 50 Hz, 1 min. |
| Test voltage: Ethernet interface signals / logic | 1500 V AC, 50 Hz, 1 min. |
Connection technology
| Connection name | Inline connector |
Conductor connection
| Connection Method | Spring-cage connection |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Inline connector
| Connection Method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Ambient conditions
| Ambient Temperature (Operation) | -25 °C ... 60 °C |
| Degree of Protection | IP20 |
| Air pressure (operation) | 80 kPa ... 108 kPa (up to 2000 m above sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
Standards and Regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
CLIPFIX 35-5 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installation cable, 2 x 2 x 0.22 mm2, solid conductor, shielded, outer sheath: 7.8 mm diameter, inner sheath: 5.75 mm ± 0.15 mm diameter
FL CAT5 FLEX - By the meter, Installation cable, Ethernet CAT5 (100 Mbps), shielded, PUR halogen-free, water blue RAL 5021, 4-wire (2x2xAWG26/7, SF/UTP), color single wire: white/orange-orange, white/green-green, cable length: Free entry (1.0 ... 1000.0 m)
FL CRIMPTOOL - Crimping pliers, for assembling the RJ45 plugs FL PLUG RJ45..., for assembly on site
Why Proax for Phoenix Contact 2702289?
Proax is an authorized distributor of Phoenix Contact 2702289 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
ILB PN 24 DI16 DIO16-2TX - Inline, Block IO, PROFINET, RJ45 jack, Digital inputs: 32 (16 fixed and 16 freely selectable), 24 V DC, connection technology: 3-conductor, Digital outputs: 16, 24 V DC, connection technology: 2-conductor, degree of protection: IP20, including Inline connector