1619312
Official DistributorSKU
PHX1619312
MPN
K-5E - OE/010-C01/M17 F8
Weight
1.333 kg
This product is Not Cancellable/Not Returnable
Series K
K-5E - OE/010-C01/M17 F8 - Cable plug in molded plastic
Cable plug in molded plastic, series: KST, M17-Socket, Straight, plastic molded, number of positions: 5+PE, type of locking: Screw locking mechanism, cable length: 10 m, shielded: yes, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1243434
- Our standard: robust halogen-free PUR cable
- Simple and safe: 100% electrically tested and assembled ready for use
- Designs with preassembled cables on one or both sides
- High flexibility: customer-specific assemblies and cable lengths can be supplied
Technical Specifications
Notes
| Notes on operation | Observe derating curve. |
Safety note
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Safety note | • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. |
| Safety note | • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. |
| Safety note | • The products are suitable for applications in plant, controller, and electrical device engineering. |
| Safety note | • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. |
| Safety note | • Assembled products may not be manipulated or improperly opened. |
| Safety note | • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). |
| Safety note | • When using the product in direct connection with third-party manufacturers, the user is responsible. |
| Safety note | • For operating voltages > 50 V AC, conductive connector housings must be grounded |
| Safety note | • Ensure that the protective or functional ground has been properly connected. |
| Safety note | • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector |
| Safety note | • Only use tools recommended by Phoenix Contact |
| Safety note | • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. |
| Safety note | • Operate the connector only when it is fully plugged in and interlocked. |
| Safety note | • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. |
| Safety note | • Observe the minimum bending radius of the cable. Lay the cable without twisting it. |
| Safety note | • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). |
Connector specifications
| Type | Straight, plastic molded |
| Housing Material | Zinc die-cast |
| Thread type | M17 |
| Type of locking | Screw locking mechanism |
| Degree of Protection | IP67, when in locked state |
| No. of pos. | 5+PE |
| Direction of rotation | Standard |
| Contact switching type | Socket |
| Insertion/withdrawal cycles | 50 |
| Contact resistance | < 0.3 mΩ |
| Max. current | 14 A |
| Voltage | 630 V |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated surge voltage | 6 kV |
| Ambient Temperature (Operation) | -40 °C ... 105 °C |
Cable specifications
| Cable Type | PSLC11Y-J |
| Shielded | yes |
| Cable structure | 4x 1.0 mm² + 2x 0.5 mm² |
| External Cable Diameter | 8.90 mm ±0.3 mm |
| Outer sheath, material | PUR |
| Material wire insulation | PP |
| Single wire, color | black 1, black 2, black 3, black 4, green/yellow Power wires + PE |
| Single wire, color | black, white Signal wires |
| Nominal voltage, cable | 1000 V |
| Test voltage | 4 kV |
| Smallest bending radius, movable installation | 69 mm |
| Max. bending cycles | 5000000 |
| Traversing path | 5 m |
| Acceleration | 5 m/s² |
| Ambient temperature (operation) for fixed installation | -40 °C ... 80 °C |
| Ambient temperature (operation) for flexible installation | -25 °C ... 80 °C |
| UL AWM style | 80°C/1000 V |
| Special Properties | Flexible cable conduit capable |
| Flame resistance | according to UL 758/1581 FT1 |
| Halogen-free | in accordance with EN 50267-2-1 |
| Resistance to Oil | EN 60811-2-1 |
Cable/line
| Cable Length | 10 m |
Accessories
Why Proax for Phoenix Contact 1619312?
Proax is an authorized distributor of Phoenix Contact 1619312 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
