Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2980445
AllRelaysElectromechanical RelaysIndustrial Relays
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
PLC-BSC-230UC/21HC/SO46
Weight
0.067 kg
This product is Not Cancellable/Not Returnable
Series PLC-BSC

PLC-BSC-230UC/21HC/SO46 - Relay base

14 mm PLC basic terminal block with protection against interference currents/voltages on the control side, with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, for high continuous currents, 1 changeover contact, input voltage 230 V AC

  • High relay release voltage
  • Resistant to interference currents
Technical Specifications

Utilization restriction

EMC noteEMC: class A product, see manufacturer's declaration in the download area

Product properties

Product familyPLC-INTERFACE
ApplicationFilter to prevent interference
Operating mode100% operating factor
Compatible componentsMiniature relay, REL-MR-110DC/21HC

Insulation characteristics

Pollution degree3

Electrical properties

Protective circuitBridge rectifier; Bridge rectifier
Protective circuitRCZ filter; RCZ filter

Input data

Nominal input voltage UN230 V AC
Input voltage range in reference to UN0.78 ... 1.14 (at 20 °C)
Typical input current at UN8.8 mA (50 Hz)
Typical input current at UN10 mA (60 Hz)
Typical response time7 ms
Typical release time20 ms
Switching threshold "0" signal, voltagetyp. 70 V AC

Relay assembly

Nominal input voltage UN230 V AC
Input voltage range in reference to UN0.78 ... 1.14
Typical input current at UN8.5 mA (50 Hz)
Typical input current at UN10 mA (60 Hz)
Typical response time7 ms
Typical release time20 ms
Typical release voltage70 V AC
Operating voltage displayYellow LED
Protective circuitBridge rectifier; Bridge rectifier
Protective circuitFilter; Filter

Optocoupler assembly

Operating voltage displayYellow LED
Protective circuitBridge rectifier; Bridge rectifier
Protective circuitFilter; Filter

Output data

Compatible componentsMiniature relay, REL-MR-110DC/21HC

Connection data

Connection MethodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm² (Single ferrule)
Conductor cross section flexible2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG26 ... 14
Tightening torque0.6 Nm ... 0.8 Nm

Signaling

Status displayLED

Dimensions

Width14 mm
Height80 mm
Depth94 mm

Material specifications

Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)

Ambient conditions

Ambient Temperature (Operation)-40 °C ... 55 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

CE

CertificateCE-compliant

UKCA

CertificateUKCA-compliant

Shipbuilding approval

CertificateTAE0000196

Corrosive gas test

IdentificationISA-S71.04. G3 Harsh Group
IdentificationEN 60068-2-60

DNV GL data

TemperatureD
HumidityA
VibrationB/C
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data

Low Voltage DirectiveConformance with Low Voltage Directive
Electromagnetic compatibilityConformance with EMC directive

Mounting

Mounting TypeDIN rail mounting
Assembly instructionsin rows with zero spacing
Mounting Positionany
Accessories
  • Phoenix Contact2966841
    2966841
    2966841 - Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation
  • Phoenix Contact2966508
    2966508
    2966508 - Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
  • Phoenix Contact1204517
    1204517
    1204517 - Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
  • Phoenix Contact2966786
    2966786
    2966786 - Continuous plug-in bridge, length: 500 mm, color: red
  • Phoenix Contact2966692
    2966692
    2966692 - Continuous plug-in bridge, length: 500 mm, color: blue
  • Phoenix Contact2966838
    2966838
    2966838 - Continuous plug-in bridge, length: 500 mm, color: gray
  • Phoenix Contact2966236
    2966236
    2966236 - Single plug-in bridge, number of positions: 2, length: 6 mm, color: red
  • Phoenix Contact2966812
    2966812
    2966812 - Single plug-in bridge, number of positions: 2, length: 6 mm, color: blue
  • Phoenix Contact2966825
    2966825
    2966825 - Single plug-in bridge, number of positions: 2, length: 6 mm, color: gray
  • Phoenix Contact2967688
    2967688
    2967688 - Single plug-in bridge, number of positions: 2, length: 8 mm, color: gray
  • Phoenix Contact2967691
    2967691
    2967691 - Single plug-in bridge, number of positions: 2, length: 14 mm, color: black
  • Phoenix Contact1053001
    1053001
    1053001 -
  • Phoenix Contact0824941
    0824941
    Zack marker strip - ZB 10 CUS
  • Phoenix Contact1053014
    1053014
    1053014 -
  • Phoenix Contact1053027
    1053027
    1053027 -
  • Phoenix Contact1053412
    1053412
    1053412 -
  • Phoenix Contact1053438
    1053438
    1053438 -
  • Phoenix Contact0818069
    0818069
    0818069 -
  • Phoenix Contact0824605
    0824605
    Marker for terminal blocks - UC-TM 10 CUS
  • Phoenix Contact0829142
    0829142
    0829142 -
  • Phoenix Contact0812120
    0812120
    0812120 -
  • Phoenix Contact0824942
    0824942
    Zack marker strip - ZB 12 CUS
  • Phoenix Contact0812146
    0812146
    0812146 -
  • Phoenix Contact0819194
    0819194
    0819194 -
  • Phoenix Contact0829144
    0829144
    0829144 -
  • Phoenix Contact0801733
    0801733
    0801733 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
  • Phoenix Contact0801681
    0801681
    0801681 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
  • Phoenix Contact1204119
    1204119
    1204119 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
  • Phoenix Contact1204122
    1204122
    1204122 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
  • Phoenix Contact0801704
    0801704
    0801704 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
  • Phoenix Contact1206421
    1206421
    1206421 - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver
  • Phoenix Contact1206434
    1206434
    1206434 - DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver
  • Phoenix Contact0801762
    0801762
    0801762 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
  • Phoenix Contact1206560
    1206560
    1206560 - DIN rail end piece, for DIN rail NS 35/7.5
  • Phoenix Contact1201730
    1201730
    1201730 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
  • Phoenix Contact1201714
    1201714
    1201714 - DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
  • Phoenix Contact0806602
    0806602
    0806602 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: white
  • Phoenix Contact1204135
    1204135
    1204135 - DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
  • Phoenix Contact1201756
    1201756
    1201756 - DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
  • Phoenix Contact1206599
    1206599
    1206599 - DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
  • Phoenix Contact1206586
    1206586
    1206586 - DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
  • Phoenix Contact1201895
    1201895
    1201895 - DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
  • Phoenix Contact1206573
    1206573
    1206573 - DIN rail end piece, for DIN rail NS 35/15
  • Phoenix Contact1201798
    1201798
    1201798 - DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile 2.3 mm, color: silver

Why Proax for Phoenix Contact 2980445?

Proax is an authorized distributor of Phoenix Contact 2980445 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact1012305
    1012305
    1012305 - 14 mm PLC basic terminal block without relay, for mounting on DIN rail NS 35/7,5, Screw connection, 1 changeover contact, Input voltage 230 V AC/DC
  • Phoenix Contact2967824
    2967824
    2967824 - 14 mm PLC basic terminal block for high continuous currents with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 230 V AC/DC
  • Phoenix Contact2966045
    2966045
    2966045 - 6.2 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 230 V AC/DC
  • Phoenix Contact2980335
    2980335
    2980335 - 6.2 mm PLC basic terminal block with protection against interference currents/voltages on the control side, with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with integrated RCZ filter, 1 changeover contact, input voltage 230 V AC
  • Phoenix Contact2967044
    2967044
    2967044 - 14 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 230 V AC/DC
  • Phoenix Contact1012001
    1012001
    1012001 - 14 mm PLC basic terminal block without relay, for mounting on DIN rail NS 35/7,5, Screw connection, 2 changeover contacts, Input voltage 230 V AC/DC
  • Phoenix Contact2980429
    2980429
    2980429 - 14 mm PLC basic terminal block with interference current and interference voltage protection on the control side, with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with integrated RCZ filter, 2 changeover contacts, input voltage 230 V AC
  • Phoenix Contact2966087
    2966087
    2966087 - 6.2 mm PLC basic terminal block for input functions with screw connection, without relay or solid-state relay, for mounting on NS 35/7,5 DIN rail, with sensor supply voltage distribution (BB), 1 N/O contact, input voltage: 230 V AC/DC
  • Phoenix Contact2980348
    2980348
    2980348 - 6.2 mm PLC basic terminal block with interference current and interference voltage protection on the control side, with screw connection, without relay or solid-state relay, with sensor supply voltage distribution (BB), 1 N/O contact, input voltage 230 V AC
  • Phoenix Contact2966456
    2966456
    2966456 -
  • Phoenix Contact1079392
    1079392
    1079392 - 14 mm PLC basic terminal block for high continuous currents, resistant to interference voltages of up to 190 V AC, thanks to defined activation and deactivation thresholds with screw connection, without relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage of 230 V AC
  • Phoenix Contact1079384
    1079384
    1079384 - 14 mm PLC basic terminal block, resistant to interference voltages of up to 190 V AC, thanks to defined activation and deactivation thresholds with screw connection, without relay, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage of 230 V AC
  • Phoenix Contact2980432
    2980432
    2980432 - 14 mm PLC basic terminal block with protection against interference currents/voltages on the control side, with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, for high continuous currents, 1 changeover contact, input voltage 120 V AC
  • Phoenix Contact1012307
    1012307
    1012307 - 14 mm PLC basic terminal block without relay, for mounting on DIN rail NS 35/7,5, Screw connection, 1 changeover contact, Input voltage 120 V AC/DC
  • Phoenix Contact2967811
    2967811
    2967811 - 14 mm PLC basic terminal block for high continuous currents with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 120 V AC/DC
  • Phoenix Contact2966032
    2966032
    2966032 - 6.2 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 120 V AC/DC
  • Phoenix Contact2980319
    2980319
    2980319 - 6.2 mm PLC basic terminal block with protection against interference currents/voltages on the control side, with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with integrated RCZ filter, 1 changeover contact, input voltage 120 V AC
  • Phoenix Contact2967031
    2967031
    2967031 - 14 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 120 V AC/DC
  • Phoenix Contact1012014
    1012014
    1012014 - 14 mm PLC basic terminal block without relay, for mounting on DIN rail NS 35/7,5, Screw connection, 2 changeover contacts, Input voltage 120 V AC/DC
  • Phoenix Contact2980416
    2980416
    2980416 - 14 mm PLC basic terminal block with interference current and interference voltage protection on the control side, with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with integrated RCZ filter, 2 changeover contacts, input voltage 120 V AC

Available for order

Phoenix Contact Availability