
The figure shows version EG 45-PS-120AC/ 24DC/250
SKU
MPN
EG 45-PS-230AC/24DC/250
Weight
0.526 kg
Series EG
EG 45-PS-230AC/24DC/250 - Power supply unit
DIN rail power supply unit, secondary-switched, input 230 V AC, output 12-28 V DC/250 mA, pre-setting 24 V DC
Technical Specifications
Product properties
Operating mode | 100% operating factor |
Electrical properties
Test voltage input/output | 4 kV AC |
Input data
Input Voltage | 230 V AC |
Voltage type of supply voltage | AC |
AC frequency range | 50 Hz ... 60 Hz |
Mains buffering time | 35 ms |
Current consumption | approx. 60 mA |
Nominal Power Consumption | approx. 12 VA |
Input fuse | 0.4 A (slow-blow TR 5, internal, solderable) |
Output data
Nominal Output Voltage | 12 V DC ±2 % (can be set up to 28 V DC. Default 24 V DC ± 4%) |
Nominal output current (IN) | 250 mA |
Residual ripple | < 100 mVPP |
Short-circuit-proof | yes |
No-load proof | yes |
Protective circuit | Electronic disconnect at 1.3 x IN; Varistor |
Input
Connection Method | COMBICON plug-in screw terminal block |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 8 mm |
Screw thread | M3 |
Output
Connection Method | COMBICON plug-in screw terminal block |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 8 mm |
Screw thread | M3 |
Dimensions
Width | 45 mm |
Height | 107 mm |
Depth | 77 mm |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | 0 °C ... 60 °C |
Conformity/Approvals
SIL in accordance with IEC 61508 | 0 |
Standards
Standards/regulations | prEN 50178 |
Standards/regulations | DIN EN 50178/VDE 0160 |
Standards/regulations | DIN VDE 0106-101 |
Standards/regulations | DIN VDE 0551 |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | Can be aligned with spacing = 10 mm |
Mounting Position | On horizontal DIN rail |
Why Proax for Phoenix Contact 2940618?
Proax is an authorized distributor of Phoenix Contact 2940618 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended