Official DistributorSKU
MPN
VAL-ME 335/20
Weight
0.098 kg
Series VAL-ME
VAL-ME 335/20 - Type 2 surge protection device
Single-position surge arrester to protect networks with one or more phases. Automatic thermal monitoring of the high-capacity varistor. Disconnection from the mains and visual fault warning in the event of overload. For mounting on NS 35/7.5.
Technical Specifications
Product properties
| IEC test classification | II |
| IEC test classification | T2 |
| EN type | T2 |
| Type | DIN rail module, one-piece |
| Number of Positions | 2 |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Nominal frequency fN | 50 Hz (60 Hz) |
| Nominal voltage UN | 277 V AC (USA) |
| Nominal voltage UN | 230 V AC (240 V AC) |
Connection data
| Connection Method | Screw connection |
| Screw thread | M5 |
| Stripping length | 14.5 mm |
| Conductor cross section flexible min. | 0.5 mm² |
| Conductor cross section flexible max. | 25 mm² |
| Conductor cross section, rigid min. | 0.5 mm² |
| Conductor cross section, rigid max. | 35 mm² |
Dimensions
| Width | 17.7 mm |
| Height | 89.8 mm |
| Depth | 65.5 mm |
| Horizontal pitch | 1 Div. |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Housing Material | PA 6.6 |
Protective circuit
| Direction of action | 1L-N/PE |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous voltage UC | 335 V AC |
| Residual current IPE | ≤ 0.3 mA |
| Standby power consumption PC | ≤ 100.00 mVA |
| Nominal discharge current In (8/20) µs | 10 kA |
| Maximum discharge current Imax (8/20) µs | 20 kA |
| Voltage protection level Up | ≤ 1.4 kV |
| Response time tA | ≤ 25 ns |
| Max. backup fuse with branch wiring | 125 A (gL) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
Air clearances and creepage distances
| Standards/regulations | EN 60664-1 / EN 61643-11 |
Standards
| Standards/regulations | IEC 61643-1 |
| Standards/regulations | DIN EN 61643-11 |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | DIN EN 61643-11 |
| Note | 2002 |
| Standards/specifications | DIN EN 61643-11/A11 |
| Note | 2007 |
Mounting
| Mounting Type | DIN rail: 35 mm |
Why Proax for Phoenix Contact 2920706?
Proax is an authorized distributor of Phoenix Contact 2920706 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Single-position surge arrester to protect networks with one or more phases. Automatic thermal monitoring of the high-capacity varistor. Disconnection from the mains and visual fault warning in the event of overload. For mounting on NS 35/7.5.
