
SKU
MPN
FL SWITCH SFN 6GT/2LX-20
Weight
0.479 kg
Series FL-SWITCH-SFN
FL SWITCH SFN 6GT/2LX-20 - Industrial Ethernet Switch
Ethernet switch, 6 RJ45 ports, 10/100/1000 Mbps on all RJ45 ports, 2 single mode SC-D ports with especially high range, 1 Gbps full duplex, auto negotiation (RJ45), autocrossing function, with signal contact and QoS, extended temperature range
- All ports offer transmission speeds of 1000 Mbps
- Jumbo frame support (frame size up to 9600 bytes/frame)
- Local diagnostic indicators with LEDs
- The switch also offers cable locking and port blocking
- Relay contact for alarm processing of voltage states
- Auto negotiation and autocrossing detection simplifies installation and setup
Documents
Technical Specifications
Dimensions
Width | 50 mm |
Height | 120 mm |
Depth | 70 mm |
Material specifications
Housing Material | Aluminum |
Mounting
Mounting Type | DIN rail mounting |
Ethernet (RJ45)
Connection Method | RJ45 |
Note on the connection method | Auto negotiation and autocrossing |
Transmission Speed | 10/100/1000 Mbps |
Transmission physics | Ethernet in RJ45 twisted pair |
No. of channels | 6 (RJ45 ports) |
Fiber optic interface
Connection Method | SC |
Transmission Speed | 1000 Mbps (full duplex) |
Transmission physics | Single-mode fiberglass |
Transmission length | 20000 m (Fiberglass 9/125) |
Wavelength | 1310 nm |
No. of channels | 2 (SC single mode) |
Potential-free signaling contact
Connection Method | Plug-in/screw connection via COMBICON |
Product properties
Product family | Unmanaged Switch SFN |
Type | Block design |
MTTF | 36.4 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
Insulation characteristics
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Switch functions
Basic Functions | Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode |
Signal contact control voltage | Monitoring of the redundant supply voltage |
PROFINET conformance class | Conformance-Class A |
Status and diagnostic indicators | LEDs: US1, US2 (redundant voltage supply), link and activity per port |
Additional functions | Autonegotiation |
Additional functions | Jumbo frames (max. 9,600 bytes) |
Security functions
Basic Functions | Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode |
Electrical properties
Local diagnostics | US1/2 Supply voltage Green LED |
Local diagnostics | 100/ACT Link status/data transmission Yellow LED |
Local diagnostics | 1000/ACT Link status/data transmission Yellow LED |
Maximum power dissipation for nominal condition | 8.64 W |
Test section | 500 V DC 1 min |
Transmission medium | Copper |
Transmission medium | FO |
Supply
Supply voltage (DC) | 24 V DC (redundant) |
Supply Voltage Range | 9 V DC ... 32 V DC |
Residual ripple | 3.6 VPP (within the permitted voltage range) |
Typical current consumption | 360 mA (at US = 24 V DC) |
Function
Signal contact control voltage | Monitoring of the redundant supply voltage |
Connection data
Connection Method | Screw connection |
Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Stripping length | 7 mm |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | 0 °C ... 60 °C |
Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Vibration (Operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
Air pressure (operation) | 86 kPa ... 108 kPa (up to 1500 m above sea level) |
Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
Resistance to gases that may endanger the functions, in acc. with DIN 40046-36, DIN 40046-37 | Sulfur dioxide (SO2) 10 ±0.3 cm3/m3, hydrogen sulfide (H2S) 1 ±0.3 cm3/m3, at 25°C and 75% humidity and exposure of four days |
EMC data
Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
Noise immunity | EN 61000-6-2:2005 |
Noise emission | EN 61000-6-4 |
Functionality
Basic Functions | Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode |
Signaling
Status display | LEDs: US1, US2 (redundant voltage supply), link and activity per port |
Accessories
- Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE++ / 4PPoE) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.
Why Proax for Phoenix Contact 2891563?
Proax is an authorized distributor of Phoenix Contact 2891563 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended