2884208
Official DistributorSKU
PHX2884208
MPN
ILB BT ADIO MUX-OMNI
Weight
0.914 kg
Series ILB-BT-ADIO-MUX-OMNI
ILB BT ADIO MUX-OMNI - Wireless set
Wireless MUX set, two modules with 16 digital inputs and outputs and 2 analog inputs and outputs (0 ... 20 mA, 0 ... 10 V) each, RSMA (female) antenna connection, incl. omnidirectional antennas with 1.5 m cable
- Wireless diagnostics by means of bar graph
- Range of 50 m ... 100 m in industrial halls with omnidirectional antennas and up to 400 m outdoors with directional antennas
- Quick connection establishment and signal transmission
- Current Bluetooth 4.0 technology
- Plug and play - startup without configuration
- It couldn't be simpler: unpack – connect – switch on
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | Inline |
| Application | I/O |
| Type | Block design |
| MTTF | 1458 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 557 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
| MTTF | 219 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
| MTBF | 465 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| MTBF | 140 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) |
| Diagnostics messages | Short-circuit or overload of the digital outputs LED |
| Diagnostics messages | Wireless connection FS LED |
| Diagnostics messages | Logic and actuator voltage LED |
| Diagnostics messages | Link quality of the wireless connection 4 LEDs |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Times
| Switch-on time | ≤ 3 s (Until the wireless connection is established) |
| Delay time | ≤ 10 ms (Latency, typical) |
| Delay time | ≤ 800 ms (Failsafe function for wireless interruption) |
Electrical properties
| Maximum power dissipation for nominal condition | 2.4 W |
Supply: Module electronics
| Connection Method | Inline connector |
| Supply Voltage | 24 V DC |
| Supply Voltage Range | 19.2 V DC ... 30.5 V DC (via power connector) |
| Current consumption | 60 mA (Communications power at 24 V DC, 25 °C) |
| Current consumption | 25 mA (Actuator supply, +load current Digital OUT (8 A)) |
| Protective circuit | Polarity protection, surge protection |
Analog:
| Input name | Analog inputs |
| Description of the input | Single ended |
| Number of Inputs | 2 |
| Current Input Signal | 0 mA ... 20 mA |
| Input resistance current input | 50 Ω |
| Voltage input signal | 0 V ... 10 V |
| Input resistance of voltage input | 130 kΩ |
| Measured value resolution | 12 bits |
| Protective circuit | Surge voltage; Suppressor diodes in the analog inputs, current limitation via internal protective circuit |
Digital:
| Input name | Digital inputs |
| Number of Inputs | 16 |
| Connection Method | Spring-cage connection |
| Connection technology | 1-conductor |
| Input voltage range "0" signal | < 5 V |
| Input voltage range "1" signal | > 15 V |
| Nominal input voltage UIN | 24 V DC |
| Typical input current per channel | 2.3 mA |
| Input Frequency | ≤ 10 Hz |
Analog:
| Output name | Analog outputs |
| Number of Outputs | 2 |
| Protective circuit | Transient protection |
| DAC resolution | 12 bit |
| Current Output Signal | 0 mA ... 20 mA |
| Load/Output Load Current Output | ≤ 500 Ω |
| Voltage output signal | 0 V ... 10 V |
| Load/output load voltage output | ≥ 2 kΩ |
Digital:
| Output name | Digital outputs |
| Connection Method | Spring-cage connection |
| Connection technology | 1-conductor |
| Number of Outputs | 16 |
| Protective circuit | Short-circuit protection, overload protection, protected against reverse voltages |
| Output Current | 8 A (Total) |
| Maximum Output Current per channel | 500 mA |
| Nominal Output Voltage | 24 V DC |
| Output current when switched off | ≤ 10 µA (When not loaded, a voltage can be measured even at an output that is not set.) |
| Nominal load, inductive | 12 VA (1.2 H, 50 Ω) |
| Nominal load, lamp | 12 W |
| Nominal load, ohmic | 12 W (48 Ω) |
| Reverse voltage resistance to short pulses | Reverse voltage proof |
| Behavior with overload | Auto restart |
| Behavior with inductive overload | Output can be destroyed |
| Behavior at voltage switch-off | The output follows the power supply without delay |
| Overcurrent shut-down | ≥ 0.7 A |
Connection data
| Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible [AWG] | ... 16 |
| Stripping length | 8 mm |
Functions
| Wireless licenses | Europe, additional countries in the e-shop |
Wireless
| Modulation type | GFSK (Gaussian Frequency Shift Keying) |
| Antenna Connection Method | RSMA (female) |
| No. of channels | 40 |
| Frequency Range | 2.402 GHz ... 2.48 GHz (ISM bandwidth) |
| Frequency band | 2.4 GHz |
| Wireless Standard | Bluetooth |
| Transmission power | 5 dBm |
| Receiver sensitivity | -95.00 dBm |
Diagnostic messages
| Diagnostics | Short-circuit or overload of the digital outputs |
| Message | LED |
| Diagnostics | Wireless connection |
| Message | FS LED |
| Diagnostics | Logic and actuator voltage |
| Message | LED |
| Diagnostics | Link quality of the wireless connection |
| Message | 4 LEDs |
Dimensions
| Width | 95 mm |
| Height | 123.4 mm |
| Depth | 57 mm |
| Note on dimensions | with connectors |
Material specifications
| Color (Housing) | green (RAL 6021) |
| Material (Housing) | PA 6.6-FR |
Ambient conditions
| Ambient Temperature (Operation) | -25 °C ... 60 °C |
| Degree of Protection | IP20 |
| Air pressure (operation) | 795 hPa ... 1080 hPa (up to 2000 m above sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 95 % |
CE
| Certificate | CE-compliant |
UL, USA/Canada
| Identification | 508 Listed |
Wireless approval, Europe
| Note | RED 2014/53/EU |
Wireless approval USA, FCC
| Identification | YG3ADIOMUX |
| Note | FCC directive, part 15.247 |
Wireless approval India, WPC
| Certificate | NR-ETA/5957 |
Wireless approval Japan, MIC
| Identification | Japan MIC (RF) ID:202-LSF002 |
Wireless approval Canada, IC
| Certificate | 4720B-ADIOMUX |
| Note | ISC directive RSS 210 |
Wireless approval Mexico, IFT
| Certificate | IFT RCPPHIL19-2130 |
Wireless approval South Africa, ICASA
| Certificate | TA-2006/032 |
KC approval for South Korea
| Certificate | MSIP-CRI-PCK-2884208 |
EMC data
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Electrostatic discharge
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | ± 6 kV (Test Level 3) |
| Discharge in air | ± 8 kV (Test Level 3) |
| Indirect discharge | ± 6 kV |
| Comments | Criterion B |
Electromagnetic HF field
| Standards/regulations | EN 61000-4-3 |
| Frequency Range | 26 MHz ... 3 GHz (Test Level 3) |
| Field intensity | 10 V/m |
| Comments | Criterion A |
Fast transients (burst)
| Standards/regulations | EN 61000-4-4 |
| Input | ± 2 kV (Test Level 3) |
| Signal | ± 2 kV (Signal line) |
| Comments | Criterion B |
Surge current load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | ± 0.5 kV (symmetrical) |
| Input | ± 1 kV (asymmetrical) |
| Signal | ± 1 kV (Signal line, asymmetrical) |
| Comments | Criterion B |
Conducted interference
| Standards/regulations | EN 61000-4-6 |
| Frequency Range | 0.15 MHz ... 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V |
Emitted interference
| Emitted radio interference in acc. with EN 55011 | EN 55016-2-3 Class A industrial applications |
Criteria
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Standards and Regulations
| Protection class | III |
| Free from substances that could impair the application of coating | in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 |
| Standard designation | RED directive 2014/53/EU |
| Standards/specifications | EN 300328 |
| Standards/specifications | EN 61000-6-4 |
| Standards/specifications | EN 61000-6-2 |
| Standards/specifications | EN 62311 |
| Standards/specifications | EN 60950 |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
CLIPFIX 35-5 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
RAD-ISM-2400-ANT-OMNI-2-1-RSMA - Omnidirectional antenna for wall mounting, frequency band: 2.4 GHz, gain: 2 dBi, degree of protection: IP65, connection: RSMA (male), incl. 1.5 m connecting cable, mounting bracket, and mounting material
RAD-ISM-2400-ANT-VAN-3-0-RSMA - Omnidirectional antenna with protection against vandalism for control cabinet mounting, frequency band: 2.4 GHz, gain: 3 dBi, degree of protection: IP55, shockproof: IK08, connection: RSMA (male), incl. 1.5 m connecting cable
RAD-ISM-2400-ANT-OMNI-6-0 - Omnidirectional antenna for wall or mast mounting, 2.4 GHz, gain: 6 dBi, degree of protection: IP67, saltwater-resistant, shock- and vibration-resistant, connection: N (female), incl. mounting bracket and mast clamps, ATEX and IECEx approval
ANT-OMNI-2459-02 - Omnidirectional antenna for control cabinet mounting, frequency band: 2.4 GHz / 5 GHz, gain: 2.5 dBi / 5 dBi, degree of protection: IP68, connection: N (male)
Directional antenna for wall or mast mounting, 2.4 GHz / 5 GHz, gain: 9 dBi, degree of protection: IP67, shockproof: IK06, saltwater-resistant, connection: N (female), incl. mounting bracket and mast clamps, ATEX and IECEx approval
RAD-PIG-EF316-N-RSMA - Antenna cable for control cabinet feed-through, outside diameter: 3.2 mm (0.126 in.), inner conductor: stranded, attenuation: 0.6 / 0.9 / 1.4 dB at 0.9 / 2.4 / 5.8 GHz, connection: N (female) -> RSMA (male), cable length: 0.5 m (1.6 ft.)
Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: solid, attenuation: 0.4 / 0.5 / 0.6 dB at 0.9 / 2.4 / 5.8 GHz, connection: N (male) -> RSMA (male), cable length: 0.5 m (1.6 ft.)- RAD-PIG-RSMA/N-1 - Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: solid, attenuation: 0.5 / 0.8 / 1.1 dB at 0.9 / 2.4 / 5.8 GHz, connection: N (male) -> RSMA (male), cable length: 1 m (3.3 ft.)
- RAD-PIG-RSMA/N-2 - Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: solid, attenuation: 0.9 / 1.3 / 2.0 dB at 0.9 / 2.4 / 5.8 GHz, connection: N (male) -> RSMA (male), cable length: 2 m (6.5 ft.)
- RAD-PIG-RSMA/N-3 - Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: solid, attenuation: 1.2 / 2.0 / 3.0 dB at 0.9 / 2.4 / 5.8 GHz, connection: N (male) -> RSMA (male), cable length: 3 m (10 ft.)
- RAD-PIG-RSMA/N-5 - Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: solid, attenuation: 2.0 / 3.3 / 4.8 dB at 0.9 / 2.4 / 5.8 GHz, connection: N (male) -> RSMA (male), cable length: 5 m (16 ft.)
RAD-ADP-N/F-N/F - Antenna adapter for control cabinet feed-through, frequency range: 0.3 GHz ... 6 GHz, degree of protection: IP65, connection: 2 x N (female)
RAD-ADP-RSMA/M-RSMA/F-90 - Antenna adapter, frequency range: 0.3 GHz ... 6 GHz, connection: RSMA (male) -> RSMA (female), 90° angled
RAD-CAB-EF393- 3M - Antenna cable, outside diameter: 10 mm (0.4 in.), inner conductor: stranded, attenuation: 1.0 / 1.8 / 3.1 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2 x N (male), cable length: 3 m (10 ft.)- Antenna cable, outside diameter: 10 mm (0.4 in.), inner conductor: stranded, attenuation: 1.6 / 2.9 / 5.0 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2 x N (male), cable length: 5 m (16 ft.)
- RAD-CAB-EF393-10M - Antenna cable, outside diameter: 10 mm (0.4 in.), inner conductor: stranded, attenuation: 2.9 / 5.6 / 9.9 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2 x N (male), cable length: 10 m (32 ft.)
- RAD-CAB-EF393-15M - Antenna cable, outside diameter: 10 mm (0.4 in.), inner conductor: stranded, attenuation: 4.3 / 8.3 / 14.8 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2 x N (male), cable length: 15 m (50 ft.)
FL RUGGED BOX - Control box for robust construction of wireless systems for industrial applications, IP66, 25 x 18 x 13 cm, polycarbonate material, gray, drilled, incl. DIN rail, plugs, and screw connections, without devices
FL RUGGED BOX POLE SET - Set for mast mounting of the FL RUGGED BOX housing, incl. screw clamps for masts up to a diameter of 89 mm
RAD-TAPE-SV-19-3 - Vulcanizing sealing tape for external protection of adapters, cable connections, etc. against the effects of weather, roll length: 3 m
Why Proax for Phoenix Contact 2884208?
Proax is an authorized distributor of Phoenix Contact 2884208 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
ILB BT ADIO MUX-OMNI 8 - Wireless MUX set, consisting of two modules with 16 digital inputs and outputs and two analog inputs and outputs each, as well as two OMNI antennas, transmission power 8 dBm, antenna gain 2 dBi
ILB BT ADIO MUX-PANEL 8 - Wireless MUX set, consisting of two modules with 16 digital inputs and outputs and two analog inputs and outputs each, as well as two PANEL antennas, transmission power 0 dBm, antenna gain 8 dBi
