Official DistributorSKU
MPN
2905692
Weight
0.239 kg
Series FLKM
FLKM-2FLK50/DO/S7-322/PLC - Interface module
VARIOFACE interface module for Siemens SIMATIC® S7-300 (6AG1322-8BH01-2AB0), redundant system connector (FLK), with SIMATIC®-specific marking (1 - 40), screw connection, module width: 112.5 mm
- Numerical labeling (1 - 40)
- Specifically for S7 300
Technical Specifications
Insulation characteristics
| Insulation | Functional insulation |
Insulation characteristics: Air clearances and creepage distances
| Insulation | Functional insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Nominal voltage UN | 30 V DC |
| Max. current carrying capacity per branch | 0.1 A (Diode) |
| Max. total current of voltage supply | 1 A (per byte) |
Air clearances and creepage distances
| Rated Insulation Voltage | 50 V |
| Rated surge voltage | 0.5 kV (1.2/50 μs) |
Supported controller SIEMENS S7-300
| Suitable I/O card | 6AG1322-8BH01-2AB0 |
Field level
| Connection Method | Screw connection |
| Number of Positions | 40 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Controller level
| Connection Method | IDC/FLK pin strip |
| Number of Connections | 2 |
| Number of Positions | 50 |
| Pitch | 2.54 mm |
Signaling
| Status display present | No |
Item dimensions
| Width | 113 mm |
| Height | 77 mm |
| Depth | 59 mm |
Material specifications
| Color | green (RAL 6021) |
| Housing insulation material | PVC |
Ambient conditions
| Degree of Protection | IP00 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient Temperature (Operation) | -20 °C ... 70 °C |
| Altitude | < 2000 m |
Air clearances and creepage distances
| Standards/regulations | DIN EN 50178: 1998-04 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | in rows with zero spacing |
| Mounting Position | any |
Notes
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Why Proax for Phoenix Contact FLKM-2FLK50/DO/S7-322/PLC?
Proax is an authorized distributor of Phoenix Contact FLKM-2FLK50/DO/S7-322/PLC and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | FLKM2FLK50DOS7322PLC |
| Pack Size | 50 |
Recommended
2905693 - VARIOFACE interface module for Siemens SIMATIC® S7-300 (6AG1331-7NF00-2AB0), redundant system connector (FLK), with SIMATIC®-specific marking (1 - 40), screw connection, module width: 90 mm
2300384 - VARIOFACE module with screw connection, two 50-pos. and four 14-pos. flat-ribbon cable connectors- 2300397 - VARIOFACE module with screw connection, two 50-pos. and four 14-pos. flat-ribbon cable connectors
2304720 - Interface modules, for 40-pos. "Mass Termination Blocks" for: -32-channel output with LED per signal, module width: 169 mm- 2304733 - Interface modules, for 40-pos. "Mass Termination Blocks" for: -32-channel output with LED per signal, module width: 169 mm
- 2296883 - VARIOFACE termination board for Siemens SIMATIC® S7-300, with SIMATIC®-specific marking (1 - 20) and additional 18 connection terminal blocks (positive potential). Several terminal points can be bridged via one switch.
- 2296896 - VARIOFACE termination board for Siemens SIMATIC® S7-300, for max. 16 channels with SIMATIC®-specific marking (1 - 20) and additional 18 connection terminal blocks (positive potential).
- 2295842 - VARIOFACE module, with screw connection, 20-pos., to two 14-pos. flat-ribbon cable connectors, halogen-free, for mounting on NS 35/7,5
2909894 - VARIOFACE termination board for Siemens SIMATIC® S7-1500 analog modules, for max. 2x 2 channels with SIMATIC®-specific marking, knife-disconnect terminal block, and test pick-off, as well as power supply terminal blocks
2295062 - VARIOFACE termination board for Siemens SIMATIC® S7-300, for max. 16 channels with SIMATIC®-specific marking (1-20), knife-disconnect terminal block, and test pick-off, module width: 113 mm
2902957 - VARIOFACE termination board, for Siemens SIMATIC® S7-300, max. 16 channels with SIMATIC®-specific marking- 2901200 - 32-channel output module with spring-cage connection. The voltage supply and the 50-pos. system connection are designed redundantly. Suitable for Yokogawa ADV551 card.
2321871 - VARIOFACE interface module with spring-cage connection, for Yokogawa RTD module AAR145.
2905714 - VARIOFACE interface module with screw connection, for Yokogawa RTD module AAR145.
2321813 - Termination board for Yokogawa ADV 151, ADV 161, ADV 551 and ADV 561 I/O modules with a fuse for cable protection (5 x 20) and fuse failure display (LED) per channel. Redundant system connection.- 2321842 - Termination board for Yokogawa ADV 151, ADV 161, ADV 551 and ADV 561 I/O modules with a fuse for cable protection (5 x 20) and fuse failure display (LED) per channel. Redundant system connection.
2900162 - Termination board for Yokogawa ADV 151, ADV 161, ADV 551 and ADV 561 I/O modules with a fuse for cable protection (5 x 20) and fuse failure display (LED) per channel. Redundant system connection.
2321884 - VARIOFACE input module with screw connection, 32 channels, redundant connector plug for Yokogawa input modules ADV151, ADV161.
2321923 - VARIOFACE input module with spring-cage connection, 32 channels, redundant connector for Yokogawa input modules ADV151, ADV161.