
The figure shows the version UM-KS50/32-MR/1/SI/ADV151
2901650
SKU
PHX2901650
MPN
UM-KS50/32-MR/1/SI/ADV551
Weight
0.871 kg
Series UM-KS
UM-KS50/32-MR/1/SI/ADV551 - Active module
32-channel output relay module (1 N/O contact, optionally non-isolated) with screw connection, fuse (1 AT), and 50-pos. system connection. Suitable for the Yokogawa ADV 551 and ADV 561 cards.
Documents
Technical Specifications
Insulation characteristics: Air clearances and creepage distances between the power circuits
| Overvoltage category | II |
| Pollution degree | 2 |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 50 V |
| Rated surge voltage | 0.5 kV (Functional insulation) |
Input data
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Input voltage range | 21.6 V DC ... 26.4 V DC |
| Typical input current at UN | 7 mA |
| Typical response time | 10 ms |
| Typical release time | 8 ms |
| Protective circuit | Freewheeling diode |
| Operating voltage display | Green LED |
| Status display/channel | Yellow LED |
Switching
| Contact switching type | 1 N/O contact |
| Type of switch contact | Double contact |
| Contact Material | AgNi, 5 µm hard gold-plated |
| Maximum Switching Voltage | 25 V AC |
| Maximum Switching Voltage | 48 V DC |
| Limiting Continuous Current | 1 A |
| Max. total current of voltage supply | 10 A |
| Min. switching current | 1 mA |
| Interrupting rating (ohmic load) max. | 24 W (24 V DC) |
| Interrupting rating (ohmic load) max. | 48 W (48 V DC) |
| Interrupting rating (ohmic load) max. | 25 VA (25 V AC) |
| Output fuse | 1 A Slow-blow (TR 5) |
Field level
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Controller level
| Connection Method | Yokogawa, KS compatible |
| Number of Connections | 2 |
| Number of Positions | 50 |
| Note | Usable system cables: Phoenix Contact YUC50, Yokogawa AKB331 |
| Tightening torque | 0.5 Nm |
Ambient conditions
| Degree of Protection | IP00 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Altitude | ≤ 2000 m |
Air clearances and creepage distances between the power circuits
| Standards/regulations | EN IEC 60664-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly note | in rows with zero spacing |
| Mounting Position | any |
Notes
| Notes on operation | No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC). |
| Notes on operation | At least one functional insulation against adjacent modules is complied with (in the support rail direction). If the application has stricter requirements for the insulation (basic insulation or reinforced insulation), they must be realized by applying suitable measures (e. g. partition plates). |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Why Proax for Phoenix Contact 2901650?
Proax is an authorized distributor of Phoenix Contact 2901650 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended



















