Official Distributor
SKU
MPN
REL-MR- 48DC/21-21AU
Weight
0.016 kg
Series REL-MR
REL-MR- 48DC/21-21AU - Single relay
Plug-in miniature power relay, with multi-layer gold contact, 2 changeover contacts, input voltage 48 V DC
- RT III-proof (wash-proof)
Technical Specifications
Product properties
Operating mode | 100% operating factor |
Mechanical service life | 3x 107 cycles |
Insulation characteristics
Insulation | Basic insulation |
Insulation | Basic insulation |
Overvoltage category | III |
Pollution degree | 3 |
Electrical properties
Service life electrical | see diagram |
Maximum power dissipation for nominal condition | 0.42 W |
Test voltage (Winding/contact) | 5 kV AC (50 Hz, 1 min., winding/contact) |
Test voltage (Contact/contact) | 2.5 kV AC (50 Hz, 1 min., contact/contact) |
Coil side
Nominal input voltage UN | 48 V DC |
Input voltage range | 31.2 V DC ... 119 V DC |
Drive and function | monostable |
Drive (polarity) | non-polarized |
Typical input current at UN | 8.7 mA |
Typical response time | 7 ms |
Typical release time | 3 ms |
Coil resistance | 5520 Ω ±10 % (at 20 °C) |
Switching
Contact switching type | 2 changeover contacts |
Type of switch contact | Single contact |
Contact Material | AgNi, hard gold-plated |
Maximum Switching Voltage | 30 V AC |
Maximum Switching Voltage | 36 V DC |
Minimum Switching Voltage | 100 mV (at 10 mA) |
Limiting Continuous Current | 50 mA |
Maximum Inrush Current | 50 mA |
Min. switching current | 1 mA (at 24 V) |
Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
Switching: when the gold layer is destroyed
Note | the following values are applicable if a gold layer is destroyed |
Contact Material | AgNi |
Maximum Switching Voltage | 250 V |
Minimum Switching Voltage | 5 V (at 10 mA) |
Limiting Continuous Current | 8 A |
Maximum Inrush Current | 15 A (300 ms) |
Min. switching current | 10 mA (At 5 V) |
Interrupting rating (ohmic load) max. | 190 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 100 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 60 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 44 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 60 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 2000 VA (for 250 V AC) |
Switching capacity | 2 A (at 24 V, DC13) |
Switching capacity | 0.2 A (at 110 V, DC13) |
Switching capacity | 0.2 A (at 250 V, DC13) |
Switching capacity | 2 A (at 24 V, AC15) |
Switching capacity | 2 A (at 120 V, AC15) |
Switching capacity | 2 A (at 250 V, AC15) |
Connection data
Connection Method | Plug / solder connection |
Dimensions
Width | 12.7 mm |
Height | 29 mm |
Depth | 15.7 mm |
Material specifications
Color | white (RAL 9010) |
Ambient conditions
Degree of Protection | RT III |
Ambient Temperature (Operation) | -40 °C ... 85 °C |
Corrosive gas test
Identification | ISA-S71.04. G3 Harsh Group |
Identification | EN 60068-2-60 |
Standards and Regulations
Standards/regulations | IEC 60664 |
Standards/regulations | EN 50178 |
Standards/regulations | EN 61810-1 |
Mounting
Assembly instructions | Can be aligned without spacing (> 70 °C ≥ 2.5 mm) |
Mounting Position | any |
Why Proax for Phoenix Contact 2834847?
Proax is an authorized distributor of Phoenix Contact 2834847 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 10 |
Recommended